more color mondays – pretty peacock, lemon lime twist and pool party

more color mondays – pretty peacock, lemon lime twist and pool party

by | Jul 6, 2026 | card samples, color challenge, die cutting, masculine cards, more color mondays, my favorites, sketch challenge, stamps ink paper, techniques

Today’s More Color Mondays color challenge is also a sketch challenge! It’s a Twofer as we say in my family – two for the price of one LOL!

This is a great way to use scraps as well! Lots of great ideas in this card!

Measurement:
BASE: Lemon Lime Twist CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 1/4″,1/2″and/or
3/4″ strips that are at least 3″ in length
Basic White CS: 3″ square, 3 1/2″ x 4″ scrap for
die cut
Pool Party CS: 3 1/4″ square, 1/4″,1/2″and/or
3/4″ strips that are at least 3″ in length
Pretty Peacock CS: 1/4″,1/2″and/or
3/4″ strips that are at least 3″ in length

Take the Basic White CS square and add adhesive over the entire surface – I used Stampin’ Seal around the edges and a strip or two in the middle. Lay cardstock strips over the Basic White cardstock to cover the entire square and the trim the overhang.
Add Stampin’ Dimensionals on the Basic White layer backside. Adhere to the Pool Party square.
Adhere the colored cardstock strip focal point onto the top center of the card. Adhere a white leave die over the popped up strips, in this case I used the leaf die from the Nature’s Symphony die set.
Stamp the sentiment from the WIld Bunch Product of the Month stamps et in Pretty Peacock ink centered below the strips.
Adhere the Dots embellishments around the sentiment to finish off the card!
With just a few tweeks you can get a different look – I had a die cut that ripped so I used the smaller section to make an additional card using the butterfly stamp and die from the Extraordinary Life Bundle. I stamped them in Pretty Peacock ink and then added Wink of Stella over them for a nice subtle sparkle!

Try your hand at this strip card design today and let me know what you design! Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Product List
Extraordinary Life Bundle (English) [ 167719 ]
[167719]
$52.00
Extraordinary Life Photopolymer Stamp Set (English) [ 167713 ]
[167713]
$25.00
Nature's Symphony Bundle (English) [ 166926 ]
[166926]
$46.75
Nature's Symphony Photopolymer Stamp Set (English) [ 166919 ]
[166919]
$19.00
Wild Bunch Photopolymer Stamp Set (English) [ 167987 ]
[167987]
$5.00
Basic White 8 1/2" X 11" Cardstock [ 166780 ]
[166780]
$14.00
Lemon Lime Twist 8-1/2" X 11" Cardstock [ 144245 ]
[144245]
$14.00
Pool Party 8-1/2" X 11" Cardstock [ 122924 ]
[122924]
$14.00
Pretty Peacock 8-1/2" X 11" Cardstock [ 150880 ]
[150880]
$14.00
Pretty Peacock Classic Stampin’ Pad [ 150083 ]
[150083]
$11.00
Stampin' Glass Mat Studio (Imperial) [ 163987 ]
[163987]
$60.00
Paper Trimmer
[152392]
$28.00
Stampin' Seal
[152813]
$9.00
Stampin' Seal+
[149699]
$13.00
Tear & Tape Adhesive
[138995]
$7.00
Multipurpose Liquid Glue
[110755]
$6.00
Mini Glue Dots
[103683]
$7.25
Mini Stampin' Dimensionals
[144108]
$4.25
Stampin' Dimensionals
[104430]
$4.25
Blending Brushes [ 153611 ]
[153611]
$17.00
Water Painters [ 168253 ]
[168253]
$13.00
Tear & Tape Adhesive [ 154031 ]
[154031]
$7.00
Paper Snips [ 103579 ]
[103579]
$12.00
Stampin' Cut & Emboss Machine [ 149653 ]
[149653]
$140.00
Extraordinary Life Dies [ 167718 ]
[167718]
$33.00
Nature's Symphony Dies [ 166925 ]
[166925]
$33.00
Array Of Dots [ 167559 ]
[167559]
$8.50
Dewdrops Embellishments [ 167748 ]
[167748]
$9.00
Shimmering Dots [ 167949 ]
[167949]
$8.50
snowy delight bundle card

snowy delight bundle card

by | Sep 5, 2025 | card samples, Christmas card ideas, die cutting, masks, new catalog, stamps ink paper

This fun winter card will be on be one of the. featured cards at my upcoming card class and with the new Snowy Delights Bundle with coordinating dies and masks it is super easy to make!

UPCOMING CLASS SCHEDULE:
*Card Class Design A
**Card Class Design B
***Card Class Design C

*September 9th – Greenville Area Library 4:30pm – 6:30pm * (RSVP to library)
*September 15th – Conneaut Lake Library 1pm – 3pm
(RSVP to library)
**September 23rd – Linesville Library 2pm – 4pm**. (RSVP to library)
***September 29th – studio class 1pm – 3pm (RSVP to me) same format as library classes 4 cards for $10***
*Card designs for the Greenville Area library and the Conneaut Lake Library classes are the same –
**the designs for the Linesville Library and ***studio class are different from the other classes!

Measurements:
BASE: Azure Afternoon CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: (2) 4″ x 5 1/4″ , 3/4″ x 4 1/4″
scrap for snowflake die

Whenever I am stamping a larger format stamp image I turn it stamp side up and place the ink pad directly on the stamp image.
I think this gives you better coverage and control as you can see where you are inking!
I stamped the large snowflake image from the Snowy Delights stamp set off the layer above and below – this creates the illusion of expanse!
I stamped in Blueberry Bushel ink.
Using the Snowy Delights Decorative Masks #1 and Balmy Blue ink and a blending brush – I colored in the two partial snowflakes.
Using the Snowy Delights Decorative Masks #2 and Lost Lagoon ink and a blending brush – I colored in the two partial snowflakes over the Balmy Blue ink.
Using the Snowy Delights Decorative Masks #4 and Azure Afternoon ink and a blending brush – I colored in the two partial snowflakes and the empty white space beside the two partial snowflakes.
Using the cluster of smaller snowflakes stamp image in Blueberry Bushel ink I stamped in between the two partial large snowflakes to add depth and texture.
Taking the extra 4″ x 5 1/4″ Basic White layer I stamped the large snowflake image off the bottom of the page in Blueberry Bushel ink.
I stamped the inside sentiment in Blueberry Bushel ink and blended the bottom edge with a blending brush and Blueberry Bushel ink for added color and texture.

Stamp the outside sentiment to the 3/4″ x 4 1/4″ strip, add the small snowflake stamp to the left-hand edge and blend the edges with a blending brush.

Adhere this layer to the inside of the card base.
Add the large snowflake die to the upper partial snowflake image – matching the die with the image and adhere with Multipurpose Glue.
Turn the layer over to the backside and cut the die that is hanging over the edge off.
Adhere this layer to the card front.
Pop up the sentiment strip on Stampin’ Dimensionals and add to the bottom third of the card front.
Add the new Frosted Iridescent Dots in the Blue color to the card front to finish off this lovely Wintery card in a soft coordinating style.

Try your hand at some masking today and go create some artwork of your very own – one mask- one stamp at a time!

Happy Stampin’
Natalie

Product List
Snowy Delights Bundle (English) [ 165809 ]
[165809]
$65.50
Snowy Delights Photopolymer Stamp Set (English) [ 165801 ]
[165801]
$24.00
Basic White 8 1/2" X 11" Cardstock [ 166780 ]
[166780]
$14.00
Azure Afternoon 8 1/2" X 11" Cardstock [ 161719 ]
[161719]
$14.00
Azure Afternoon Classic Stampin' Pad [ 161663 ]
[161663]
$9.00
Balmy Blue Classic Stampin' Pad [ 147105 ]
[147105]
$9.00
Blueberry Bushel Classic Stampin' Pad [ 147138 ]
[147138]
$9.00
Lost Lagoon Classic Stampin' Pad [ 161678 ]
[161678]
$9.00
Stampin' Glass Mat Studio (Imperial) [ 163987 ]
[163987]
$60.00
Paper Trimmer
[152392]
$28.00
Bone Folder
[102300]
$8.00
Stampin' Seal
[152813]
$8.00
Stampin' Seal+
[149699]
$12.00
Tear & Tape Adhesive
[138995]
$7.00
Multipurpose Liquid Glue
[110755]
$6.00
Mini Glue Dots
[103683]
$7.25
Mini Stampin' Dimensionals
[144108]
$4.25
Stampin' Dimensionals
[104430]
$4.25
Paper Snips
[103579]
$12.00
Blending Brushes [ 153611 ]
[153611]
$15.00
Stampin' Cut & Emboss Machine [ 149653 ]
[149653]
$140.00
Snowy Delights Dies [ 165807 ]
[165807]
$37.00
Snowy Delights Decorative Masks [ 165808 ]
[165808]
$12.00
Frosted Iridescent Dots [ 165766 ]
[165766]
$9.00
more color mondays – pool party, crumb cake and misty moonlight

more color mondays – pool party, crumb cake and misty moonlight

by | Aug 18, 2025 | card samples, color challenge, Designer Series Paper, die cutting, fun fold, more color mondays, my favorites

Today’s More Color Monday Color Challenge features a great fun fold card using the Country Woods DSP and the Gallery Blooms Bundle.

Measurements:
BASE: Misty Moonlight CS: 4 1/4″ x 11″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″
DSP: 4 1/8″ x 4 5/8″ cut into 2 pieces
2 1/4″ x 2 1/2″
Crumb Cake CS: scraps for die cuts
Pool Party CS: scraps for dies
Misty Moonlight CS: scraps for floral die

Score the base Misty Moonlight CS at 2 3/4″ and 4 1/4″.

Adhere the 4″ x 5 1/4″ Basic White layer to the inside of the card.

Cut the DSP in 2 pieces.

Adhere the 2 5/8″ x 4 1/8″ piece of Country Woods DSP.

Adhere the second piece of DSP over the Basic White layer butting the matching edges to the fold.
Adhere the smaller DSP piece across the first panel hanging over edge.

Stamp the sentiment on one of the Crumb Cake circle dies.
Stamp the sentiment on the other Crumb Cake circle.

Adhere the first sentiment hanging over the edge of the smaller DSP piece.

Stamp the lacy flowers in Crumb Cake ink on the scrap of Crumb Cake CS. Die cut the flowers. Pop up the flower on Stampin’ Dimensionals on the edge of the Basic White CS.
Stamp the three flowers from the Gallery Blooms with Misty Moonlight ink on Misty Moonlight CS. Die cut the flowers. Adhere the flowers over the smaller DSP piece.
Die cut two small leaf images from the Pool Party CS.
Adhere under the floral die.
Adhere the second sentiment circle directly under the top circle on the inside cardstock.
I added five Neutral Matte Dots in the Crumb Cake color around the card to finish it!
I had an idea for this card and I love when an idea comes into reality and is as you imagined it!
I really like this color combination – not my usual good to but these work well together.

Try this fun color combination today and make some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Product List
Gallery Blooms Bundle [ 165213 ]
[165213]
$53.00
Gallery Blooms Photopolymer Stamp Set [ 165211 ]
[165211]
$19.00
The Right Words Cling Stamp Set (English) [ 165316 ]
[165316]
$26.00
Basic White 8 1/2" X 11" Cardstock [ 166780 ]
[166780]
$14.00
Crumb Cake 8-1/2" X 11" Cardstock [ 120953 ]
[120953]
$14.00
Misty Moonlight 8-1/2" X 11" Cardstock [ 153081 ]
[153081]
$14.00
Pool Party 8-1/2" X 11" Cardstock [ 122924 ]
[122924]
$14.00
Country Woods 12" X 12" (30.5 X 30.5 Cm) Designer Series Paper [ 163393 ]
[163393]
$12.50
Stampin' Glass Mat Studio (Imperial) [ 163987 ]
[163987]
$60.00
Paper Trimmer
[152392]
$28.00
Bone Folder
[102300]
$8.00
Stampin' Seal
[152813]
$8.00
Stampin' Seal+
[149699]
$12.00
Tear & Tape Adhesive
[138995]
$7.00
Multipurpose Liquid Glue
[110755]
$6.00
Mini Glue Dots
[103683]
$7.25
Mini Stampin' Dimensionals
[144108]
$4.25
Stampin' Dimensionals
[104430]
$4.25
Paper Snips
[103579]
$12.00
Blending Brushes [ 153611 ]
[153611]
$15.00
Stampin' Cut & Emboss Machine [ 149653 ]
[149653]
$140.00
Gallery Blooms Dies [ 165212 ]
[165212]
$40.00
Neutral Matte Dots [ 165561 ]
[165561]
$8.00
more color mondays – pumpkin pie, petal pink and balmy blue

more color mondays – pumpkin pie, petal pink and balmy blue

by | Jul 14, 2025 | card samples, color challenge, Designer Series Paper, die cutting, fun fold, more color mondays, online exclusives, techniques

Today’s More Color Mondays color challenge takes it’s cue from the gorgeous Everyday Skies 6″ x 6″ DSP. The sheet on the front of this card is covered in fluffy clouds of Petal pink and light Pumpkin Pie set against a Balmy Blue sky. A perfect summer sky for a summery fun fold card! This card is called a Pop Out Swing Fun Fold and i will show you how easy it is to make!
Follow along and make one of your own!

Measurements:
BASE 1: Balmy Blue CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
BASE 2: Balmy Blue CS: 5 1/2″ x 8″
scored at 2″, 4″ and 6″
DSP: BASE 1 outside layer: 4″ x 5 1/4″
BASE 2 inside layers: (3) 1 3/4″ x 5 1/4″
Basic White CS: 1 3/4″ x 5 1/4″
Pumpkin Pie CS: scraps for butterfly dies
Petal Pink CS: scraps for butterfly dies

Score BASE 1 at 4 1/4″ and BASE 2 at 2″, 4″, and 6″.

Adhere the 4″ x 5 1/4″ Everyday Skies DSP layer to the Balmy Blue BASE 1 card front.

Flip BASE 1 over and adhere one of the Beautiful Bokeh DSP strips to the left-hand edge of the backside.
Die cut the large base butterfly image from the Beautiful Butterflies bundle out of the card front – cutting through both layers on the front and the DSP on the back side.
On BASE 2, place the 5 1/2″ side of the paper at the top edge of the Stampin’ Trimmer, cut at 3/4″ down to the 2″ score line on each side of the paper. Then cut along the 2″ score line in between the cut lines. This will leave two tabs on the top and bottom of this BASE piece.
Adhere the other two 1 3/4″ x 5 1/4″ Beautiful Bokeh DSP pieces to the second and thrid panels of BASE 2.
Stamp and decorate the Basic White 1 3/4″ layer and adhere to the last panel of BASE 2.
Place Multipurpose liquid glue to the back side of panel 4 and adhere to the right-hand edge of BASE 1 making sure that the outside edges align.
Fold in between panels 2 and 3 and apply liquid glue to the tabs.

Clos ethe card front over the tabs and adhere to the back of the BASE 1 card front. If you lie the BASE 2 flat and bring the BASE 1 card front over it this will ensure that the card will close well after adhering.

With the card closed, apply liquid glue to the inside right panel, the part that is visible through the butterfly die cut out space.
Die cut the butterfly base in Pumpkin Pie CS.
Die cut the butterfly detail die in Petal Pink CS.
Adhere the detailed die to the base with Liquid Glue.
Adhere the completed butterfly die to the right-hand edge that has glue on it – laying the butterfly into the original die negative space.
Once dry this will allow the butterfly to “swing” as the mechanism opens and closes with the card!
I added two smaller butterflies to the inside of the card and Holographic Resin Dots to the outside of the card to finish it off with a llittle sparkle!

You can cut out the front of the card wish any shape! Try a die that you have on hand and see what artwork you can create – one stamp at a time!

Happy Stampin’
Natalie

Product List
Beautiful Bokeh Suite Collection (English) [ 164619 ]
[164619]
$79.25
Beautiful Butterflies Bundle (English) [ 164615 ]
[164615]
$59.25
Beautiful Butterflies Photopolymer Stamp Set (English) [ 164608 ]
[164608]
$24.00
Basic White 8 1/2" X 11" Cardstock [ 166780 ]
[166780]
$14.00
Balmy Blue 8-1/2" X 11" Cardstock [ 146982 ]
[146982]
$14.00
Petal Pink 8-1/2" X 11" Cardstock [ 146985 ]
[146985]
$14.00
Pumpkin Pie 8-1/2" X 11" Cardstock [ 105117 ]
[105117]
$14.00
Beautiful Bokeh 6" X 6" (15.2 X 15.2 Cm) Designer Series Paper [ 164607 ]
[164607]
$12.50
Everyday Skies 6" X 6" (15.2 X 15.2 Cm) Designer Series Paper [ 164622 ]
[164622]
$12.50
Pumpkin Pie Classic Stampin' Pad [ 147086 ]
[147086]
$9.00
Stampin' Glass Mat Studio (Imperial) [ 163987 ]
[163987]
$60.00
Paper Trimmer
[152392]
$28.00
Bone Folder
[102300]
$8.00
Stampin' Seal
[152813]
$8.00
Stampin' Seal+
[149699]
$12.00
Tear & Tape Adhesive
[138995]
$7.00
Multipurpose Liquid Glue
[110755]
$6.00
Mini Glue Dots
[103683]
$7.25
Mini Stampin' Dimensionals
[144108]
$4.25
Stampin' Dimensionals
[104430]
$4.25
Paper Snips
[103579]
$12.00
Stampin' Cut & Emboss Machine [ 149653 ]
[149653]
$140.00
Beautiful Butterflies Hybrid Embossing Folder [ 164614 ]
[164614]
$42.00
Holographic Resin Dots [ 165598 ]
[165598]
$8.00
mixed media pop out fun fold

mixed media pop out fun fold

by | May 9, 2025 | card samples, Designer Series Paper, die cutting, fun fold, my favorites, online exclusives, techniques

This is a fun movement card that has two “arms” that swing out from under a DSP covered box.

Measurements:
BASE: Poppy Parade CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Piece #1 2 1/2″ x 4 1/2″ score at 1/2″ and 1″
Piece #2 2 1/2″ x 3″
Piece #3 1″ x 3 1/4″ scored at 1/2″, 1″ and 2 3/4″
Pieces #4 and 5 (2) 2 1/4″ x 2 3/8″
Piece #6 1 3/8″ x 7 1/2″ scored
DSP
Piece #1 2 1/4″ x 3 1/4″
Piece #2 2 1/4″ x 2 3/4″
Piece #4 and 5 2 1/8″ x 2 1/4″

Take the 1 3/8″ x 7 1/2″ mechanism and score on the 1 3/8″ side at 1/2″ and 1″
turn on the 7 1/2″ side and score at the 2 1/2″ mark from the top score line to the upper edge and score at the 2 1/2″ mark below the bottom line to the bottom edge.

There are three long sections going down the 7 1/2″ side in the 1 3/8″ x 7 1/2″ layer.
Draw a mark 1/2″ inside the small score line.
Draw a line from the mark to the top of the score line on the narrower strip, then draw another line to the bottom of the score line on the equal strip.

Repeat on the other side.

Score the lines with the Take Your Pick tool.

Cut the four corners from the 1 3/8″ x 7 1/2″ piece.
Fold the scored pieces at the drawn lines.
One side will have an extra flap this will be positioned towards the card front. Bend the score line upwards.
Flip the mechanism over so that the extra flap piece is facing downwards and place glue on the top portion of the mechanism as shown in the photo below.
Place the glue side down on the back of the inside of the card – position the mechanism so it is in the center of the card butting up to the score line.
Close the card front and rub in the middle of the card to secure the glue and bottom of the mechanism to the inside of the card.
The center section of the mechanism should have the tab facing upwards at this point.
Place glue on the back center section – NOT ON THE TAB yet! – above the score line on the mechanism as in the photo below – and close the card front to secure the mechanism to the card front.
The mechanism will be secured on each side of the card and have the front tab free and two arms of the mechanism one off to each side.
Adhere the DSP pieces to the Poppy Parade cardstock pieces:
Adhere the 2 1/4 x 3 1/4 DSP piece to the 2 1/2″ x 4 1/2″ above the score lines.
Adhere the 2 1/4″ x 2 3/4″ DSP piece to the
2 1/2″ X 3″ piece.
Adhere the (2) 2 1/8″ x 2 1/4″ DSP pieces to the 2 1/4″ x 2 3/8″ pieces of cardstock.
Place glue on the left hand arm of the mechanism and position the 2 1/4″ x 2 3/8″ piece with the 2 3/8″ piece along the arm.
Place glue on the right hand arm and glue the 2 3/8″ side of the 2 1/4″ x 2 3/8″ piece to this arm of the mechanism.
Place a thin line of liquid glue to the back edge that is not scored and adhere to the tab on the mechanism.
Fold the mechanism cover at the second score line flatten out the cardstock and place glue on the outer edge and close the card and adhere it to the back portion of the card.
You will need to place the “wings” of the mechanism under the cover before closing the card. This will be the cover for the pop out mechanism!
Take the 1″ x 3 1/4″ cardstock piece and score at 1/2″, 1″ and 2 3/4″
PLace glue on the single tab and place face down in the center of the cover and close the card to secure rubbing over the card to let the glue adhere.
Fold the other side at the second score line and place glue on the first section only. Close the card and secure the cardstock piece to the inside of the card front. It will form a pop up box for the 2 1/2″ x 3″ card stock piece to adhere to.

Place liquid glue to the front of that box.

Lie the 2 1/2″ x 3″ DSP covered piece – face down with the DSP facing down towards the DSP on the cover piece and close the card front and rub on the mechanism to adhere this piece to the upper box.
I stamped two tulip images from the Mixed Florals stamp set and colored them with Poppy Parade, Petal Pink and Granny Apple Green Stampin’ Blends markers and then die cut them.
Now the mechanism and the covers are complete and this is what the card inside will look like.
I cut up one of the tulip images and adhered pieces to the pop out wings of the mechanism so that flowers appear when the pop out is engaged!
I also stamped two sentiments from the Mixed Labels stamp set in Tuxedo Black Memento ink and die cut with the sentiment dies from that set.
I placed the “I’m so glad we’re friends on the inside cover of the mechanism.
I adhered the second tulip image to the outside of the card.
I popped up the other sentiment piece on the card front with Stampin’ Dimensionals.
I added Silver edged sheer ribbon around the card for closure.
I added some of the extra tulip pieces leftover from the inside of the card and popped them up over the ribbon to hold it in place and added Basic Grey and Smoky Slate Pearls to the card to finish it off with a little sparkle!

This is a perfect WOW card for that someone special!
Try this or another one of my fun fold tutorials and go create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

Product List
Mixed Media Florals Suite Collection (English) [ 164659 ]
[164659]
$128.00
Mixed Florals Bundle [ 164642 ]
[164642]
$56.50
Mixed Florals Photopolymer Stamp Set [ 164639 ]
[164639]
$24.00
Mixed Labels Bundle (English) [ 164653 ]
[164653]
$39.50
Mixed Labels Cling Stamp Set (English) [ 164643 ]
[164643]
$23.00
Basic White 8 1/2" X 11" Cardstock [ 166780 ]
[166780]
$14.00
Poppy Parade 8-1/2" X 11" Cardstock [ 119793 ]
[119793]
$8.75
Mixed Media Florals 12" X 12" (30.5 X 30.5 Cm) Designer Series Paper [ 164638 ]
[164638]
$12.50
Stampin' Glass Mat Studio (Imperial) [ 163987 ]
[163987]
$60.00
Paper Trimmer
[152392]
$28.00
Bone Folder
[102300]
$8.00
Stampin' Seal
[152813]
$8.00
Stampin' Seal+
[149699]
$12.00
Tear & Tape Adhesive
[138995]
$7.00
Multipurpose Liquid Glue
[110755]
$6.00
Mini Glue Dots
[103683]
$7.25
Mini Stampin' Dimensionals
[144108]
$4.25
Stampin' Dimensionals
[104430]
$4.25
Paper Snips
[103579]
$12.00
Stampin' Cut & Emboss Machine
[149653]
$130.00
Mixed Florals Dies [ 164641 ]
[164641]
$39.00
Mixed Labels Dies [ 164652 ]
[164652]
$21.00
Poppy Parade Stampin' Blends Combo Pack [ 154958 ]
[154958]
$11.00
Granny Apple Green Stampin' Blends Combo Pack [ 154885 ]
[154885]
$11.00
Petal Pink Stampin' Blends Combo Pack [ 154893 ]
[154893]
$11.00
Basic Gray & Smoky Slate Pearls [ 163416 ]
[163416]
$7.50