more color mondays – strawberry slush, timid tiger and darling duckling

more color mondays – strawberry slush, timid tiger and darling duckling

Today’s More Color Mondays features a new suite that will debut tomorrow called Florals in Bloom with the Annual Catalog go live date on May 6th.

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 2 1/8″ and 4 1/4″
(2) 1 7/8″” x 5 1/4″
3″ x 3 3/4″ scored at 3/4″, 1 1/2″, 2 1/2″, 3″
scraps for dies
DSP: 4″ x 5 1/4″
Strawberry Slush CS: 4″ x 5 1/4″, scraps for dies
Timid Tiger CS: 3″ x 4 1/2″, scraps for dies
Darling Duckling CS: 3″ x 4″, scraps for dies

Score the card base like a regular Z fold fun fold
at 2 1/8″ and 4 1/4″.
Emboss the two 1 7/8″ x 5 1/4″ layers of Basic White cardstock with the Eyelet 3D embossing folder and adhere to the first two panels of the card base.
Adhere the 4″ x 5 1/4″ layer of DSP from the Florals in Bloom Suite of products set to debut with the New 2025-2026 Annual Catalog tomorrow!
Score the 3″ x 3 3/4″ piece of Basic White cardstock at 3/4″, 1 1/2″, 2 1/2″, 3″.

Adhere the first and fifth panel together to form a rectangular box.

Lay the flattened box in the middle of the DSP layer just to the right of the score line. Flatten the box with the edge toward the inside 4 1/4″ fold of the card. Adhere the inside panel just a sliver away from the score line and close the card front and rub so the box adheres to the second panel.
Open the card and place Stampin’ Seal + or Tear-n-Tape on the inside panel of the box next to the DSP. Close the card and rub on the back of the card to adhere the box to the DSP layer of the card.
Die cut the Strawbarry Slush layer with the second largest Textured Notes dies.

Stamp “where you’re planted” sentiment in Strawberry Slush ink onto a Basic White 1/2″ strip and cut the words apart. Adhere in the center of the die cut layer.

Place adhesive on the top panel of the box and center the Strawberry Slush die layer over the box and adhere to it.
Die cut the Timid Tiger layer with the 3rd largest die from the Textured Notes die set and the Darling Duckling layer with the fourth largest die.
Adhere the Darling Duckling die over the Timid Tiger layer.
Place adhesive on the left side of the back of the two dies and adhere to the middle of the first panel of the card.

Die cut flowers from the Pretty Florals Bundle in the three In Colors.

Adhere the detailed Darling Duckling flower center to the large Timid Tiger flower die and adhere to the right hand corner of the die rectangles.

Stamp the “bloom” sentiment in Strawberry Slush ink and die cut. Adhere to the top of the rectangle dies on an angle.

Stamp the smaller flowers in Strawberry Slush ink – this is a two step stamping image – so stamp the base image on your grid paper and then stamp the flower “stamped off” image on your cardstock. Stamp the detailed smaller flower over the base in full strength and die cut them out. I stamped three flowers at full strength for some variation.
Arrange them around the Timid Tiger die cut and pop some up on Mini Stampin’ Dimensionals.
Add a Darling Duckling bloom with Timid Tiger edge tucked under the Timid Tiger die cut.
Add two of the medium blooms on the inside Strawberry Slush layer.

This is what the Double Decker Pop Up fun fold looks like in a standing position!

I added some small and medium Darling Duckling 2025-2027 In Color Flat Pearls to the smaller flower centers and Strawberry Slush Pearls around the Bloom sentiment!
I added a large Darling Duckling Pearl to the right hand corner of the Strawberry Slush Double Decker layer to finish this lovely Springtime card!

Try this fun fold with your stash and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

Reminder the new Annual Catalog debuts tomorrow so these new items will not be able to be linked.

everyday you and me corner fold card

everyday you and me corner fold card

Today’s More Color Mondays features the retiring 2023-2025 In Color Wild Wheat, Lost Lagoon and Pretty Peacock.

Everyday You and Me Bundle is on the Last Chance List and Everyday Happiness DSP is beautiful and makes this corner fold card.

Measurements:
BASE: Pretty Peacock CS: 4 1/4″ x 11″
scored at 5 1/2″
DSP: (2) 4″ x 5 1/4″
Basic White CS: 4″ x 5 1/4″
scrap for sentiment piece and flowers/leaves

Mark the top of the 4 1/4″ side of the base at 1 3/4″ and score from the middle score to the mark.
Cut one of the DSP layers from the corner to 1 1/4″ mark on one side.
Adhere the DSP cut piece to the front of the card base.
Turn down the corner and adhere it down.

Cut 1/4″ off the fat end of the small DSP triangle and adhere to the turned down triangle.

Stamp the sentiment in Pretty Peacock ink on a Basic White scrap. Stamp a leaf in Wild Wheat above the sentiment. Stamp the five circle image in Lost Lagoon ink all over the background of the sentiment piece.
Fussy cut the sentiment piece.
Cut another triangle from corner to a 1 3/4″ mark of the second DSP layer.
Adhere to the top of the 4″ x 5 1/4″ Basic White piece.
Stamp two flowers in Pretty Peacock ink and stamp off one flower in a lighter tone.
Stamp one each of the leaves in Wild Wheat ink and die cut all the flowers and leaves.
Arrange the flowers and leaves with dies around the sentiment piece.
Adhere the sentiment over the card front.
Adhere the Sunny Day Dots embellishments to the card front.
I cut a matte for the sentiment piece and then re-adhered the sentiment piece to the card front.

Place a linen thread bow to the bottom right hand-side of the sentiment piece.

This is a fun and easy way to make a standard card with a little interest – a corner turned down. Try this technique and create some artwork of your very own one stamp at a time!

Happy Stampin’
Natalie

seaside wishes z with a side fold fun fold

seaside wishes z with a side fold fun fold

This is a fun fold I designed it is a z fold with a side flap. I added an extra piece on the z fold and extended over the side flap with lots of fun Seaside Wishes die cuts!

Measurements:
BASE: Crumb Cake 5 1/2″ x 10 3/8″
scored at 2″, 4″ and 8 1/4″
scraps for die cutting and stamping
1/2″ x 4 1/2″ strip
Basic Beige CS: 2 1/2″ x 5 1/2″
4″ x 5 1/4″ for inside middle layer
scraps for stamping, embossing and die cutting
Flirty Flamingo CS: 1/2″ x 4 1/2″ strip and scraps
for die cutting

Stamp the inside sentiment and starfish images on the Basic Beige 4″ x 5 1/4″ layer and adhere to the inside middle panel.
Score the base cardstock at 2″, 4″ and 8 1/4″.
Fold the 2″ score line in a mountain fold, score the 4″ and 8 1/4″ score lines into a valley fold.
Emboss the 2 1/2″ x 5 1/2″ Basic Beige layer in the Seaside Wishes hybrid embossing layer and placing tape on the outside of the first panel adhere so the Basic Beige panel is about 1/4″ from the edge and hanging over the right hand side of the first panel.
Emboss and die cut a few of the sand dollars from the Hybrid embossing folder in the Basic Beige CS and adhere to the outside middle of the right hand panel.
Die cut a few small starfish stamped in Pecan Pie ink on Crumb Cake CS and plain and use two on this panel as well.
Die cut a bunch of the Seaside Wishes images and dies in all three cardstock colors and arrange them on the left-hand outside panel extending over towards but not exceeding the right-hand edge of the card.
Stamp the outside sentiment in Pecan Pie ink on the Flirty Flamingo strip and adhere it over the Crumb Cake strip. Pop up on Stampin’ Dimensionals and place in the middle of the left-hand panel.

Color Pearl Basic Jewels with the Dark Flirty Flamingo Stampin’ Blends and adhere to the card as a final coordinating detail!

Unfolded this card will stand on it’s own and with all of the die cut decor it will display beautifully!

Try this extra flap z-fold card soon with your supplies and show me how it turns out!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

spring corners card

spring corners card

This simply stamped card uses the new Online Exclusives set Spring Corners.

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″
3 3/4″ x 5″
Daffodil Delight CS: 4″ x 5 1/4″

Die cut the daisy corner die from the Spring Corners bundle in the left-hand corner.
Stamp the corner sentiment in the opposite corner.
Adhere the Daffodil Delight layer to the card base.
Adhere the die cut layer over the Daffodil Delight CS layer.
Blend Daffodil Delight ink on the smaller die cut layer.
Tap water droplets from a Water Painter against a bone folder creating water splatters.
The water smeared the word day so I stamped that word again and I popped up the word over the original to emphasize it and add some additional depth and dimension to the card.
Adhere Adhesive-Backed Sparkle Gems around the sentiment and this simple corner card is finished.
Such a fun stamping around the corners of the card piece of art!
Try stamping words you have around the edges of the card for some fun intrigue to your next card or get this fun Online Exclusive bundle!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

making a watercolor template – friendly seagulls watercolor card

making a watercolor template – friendly seagulls watercolor card

Today’s blog post is about creating a template with dies to use to watercolor through the negative space to create a unique background.
Today I wanted to create a segmented background of equal squares so i used the smallest square die from the Stylish Shapes die set and ran a 4″ x 5 1/4″ layer of Basic White through the Stampin’ Cut and Emboss machine creating two rows of three die cuts resembling window panes.

Measurements:
BASE: Coastal Cabana CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Pool Party CS: 4″ x 5 1/4″
Fluid 100 Watercolor Paper: 1/2 sheet
Basic White CS: 4″ x 5 1/4″ for mask/template
scraps for stamping

Using 3M Post-it Labeling and cover up tape I secured down one side of the template over the watercolor paper – because the Fluid 100 1/2 sheet is smaller than the template make sure that the template is evenly spaced on the watercolor paper.
Squeeze the lid of the Coastal Cabana ink pad and get some ink on the lid.
With a Water Painter place a few drops of water onto the lid and mix the ink and water with the brush. I used the medium brush size from the three piece set that comes with when you order the Water Painters #151298 3 painters in a set $13.00.
Brush the inside of each die opening with the watercolor wash.
Allow to dry before removing the template.
Remove the template and make sure the surface is totally dry before stamping.
I stamped in Tuxedo Black Momento ink the flying birds image in the top two boxes.
I stamped the fish image in the middle left-hand box and the shells image in the lower right-hand box.
On scraps of Basic White CS I stamped two of the birds from the Friendly Seagulls FREE Level One Sale-a-bration Rewards stamp set that you can earn with a $60 order. I think this is such a fun set!
I used Stampin’ Blends to color the birds: Pool Party Light and Dark to color the wings and Smoky Slate to shade the bellies and wings of the seagulls, Lemon Lolly for their beaks and webbed feet and crumb cake dark for the french fries.
I fussy cut the birds using the Stampin’ Up! Paper Snips which are the best knife edged scissors to fussy cut with as you can cut all the way to the tip!
I adhered the birds onto the remaining two boxes.
I stamped “hey friend” sentiment in the upper left-hand box to finish the stamping on the card!
I popped up the watercolored layer on Stampin’ Dimensionals and added it to the 4″ x 5 1/4″
Pool Party layer.
Opening the Paper Snips scissors and running one of the blades across the edges of the Pool Party layer I distressed the edges of this layer and then adhered it to the Coastal Cabana base card.
I finished off the card with the new Sparkle Gems but just as easily could have used the Riverside Irregular Pearls on this project as well
Which do you like better?
Try this water coloring template technique and show me what you create!
Which embellishment do you like better?

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie