more color mondays – pretty peacock, lemon lime twist and pool party

more color mondays – pretty peacock, lemon lime twist and pool party

Today’s More Color Mondays color challenge is also a sketch challenge! It’s a Twofer as we say in my family – two for the price of one LOL!

This is a great way to use scraps as well! Lots of great ideas in this card!

Measurement:
BASE: Lemon Lime Twist CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 1/4″,1/2″and/or
3/4″ strips that are at least 3″ in length
Basic White CS: 3″ square, 3 1/2″ x 4″ scrap for
die cut
Pool Party CS: 3 1/4″ square, 1/4″,1/2″and/or
3/4″ strips that are at least 3″ in length
Pretty Peacock CS: 1/4″,1/2″and/or
3/4″ strips that are at least 3″ in length

Take the Basic White CS square and add adhesive over the entire surface – I used Stampin’ Seal around the edges and a strip or two in the middle. Lay cardstock strips over the Basic White cardstock to cover the entire square and the trim the overhang.
Add Stampin’ Dimensionals on the Basic White layer backside. Adhere to the Pool Party square.
Adhere the colored cardstock strip focal point onto the top center of the card. Adhere a white leave die over the popped up strips, in this case I used the leaf die from the Nature’s Symphony die set.
Stamp the sentiment from the WIld Bunch Product of the Month stamps et in Pretty Peacock ink centered below the strips.
Adhere the Dots embellishments around the sentiment to finish off the card!
With just a few tweeks you can get a different look – I had a die cut that ripped so I used the smaller section to make an additional card using the butterfly stamp and die from the Extraordinary Life Bundle. I stamped them in Pretty Peacock ink and then added Wink of Stella over them for a nice subtle sparkle!

Try your hand at this strip card design today and let me know what you design! Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – berry burst, lemon lime twist and gorgeous grape

more color mondays – berry burst, lemon lime twist and gorgeous grape

Today’s More Color Mondays continues a study in color theory using a complimentary, opposing colors of Berry Burst, Lemon Lime Twist and Gorgeous Grape.

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored 4 1/4″
4″ x 5 1/4″, scraps for dies, (3) strips

Paint the 1/4″ strips with a blender pen and Berry Burst ink in a striped pattern.
Paint the remaining strips with the individual colors.
Emboss the 4″ x 5 1/4″ layer with the Mini Corrugated 3D embossing folder.

Splatter the embossed layer with Berry Burst ink.

Die cut a Basic White scrap with two consecutive Stylish Shapes dies to make an open circle.
Cut Mini Stampin’ Dimensionals in half around the back of the circle die.
Die cut the large banner die from the Stylish Shapes die set and stamp the Happy Birthday from the Beautiful Butterflies stamp set in Berry Burst ink.
Cut the three strips down to about 4″ to 4 1/4″ length and adhere them to the embossed layer in alternating pattern.
Pop up the open circle die over the three strips.
Pop up the Happy Birthday sentiment over the circle die.
Brush Berry Burst ink with a Blending Brush over the small butterfly die from the Beautiful Butterflies bundle.
Adhere to the circle die over the sentiment piece.
Adhere the embossed layer over the card front.
Place three Fine Shimmer Purple Gems around the card to finish off with a sparkle.

This is a great use of Strip scraps and using opposite colors works so well! Opposites attract right!

Try this color combination or another complementary one – now go create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

beautiful gallery louvered card

beautiful gallery louvered card

I am always looking for ways to use my Basic White strip scraps.

Today’s card is a great way to use up some of the scraps! I saw a version of this card on Pinterest and decided to try it with the Beautiful Gallery Suite of products.

Measurements:
BASE: Highland Heather CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Lemon Lime Twist CS: 4″ x 5 1/4″
Basic White CS: (8) 1/2″ strips

Take the 8 strips and press them together and using 3M Post-It Tape to tack down both sides so that the strips stay tightly together.

Make sure that the strips are together without leaving any space in between them. Stamp with Tuxedo Black Memento ink the triple flower image from the Gallery Blooms stamp set from the Beautiful Gallery Suite of products.
Color the blossoms of the flowers with Highland Heather and Fresh Freesia Stampin’ Blends.
Color the leaves with Lemon Lime Twist Stampin’ Blends.
Cut and score the Highland Heather base card.
Cut the Lemon Lime Twist layer.
Stamp the hello sentiment in Highland Heather ink onto the second to the last strip.
Pull the top strip off the 3M Post-It Tape and adhere three Stampin’ Dimensionals to the back of the strip and adhere to the card.
Pull the next strip off the tape and adhere directly below the first strip – do not pop this one up but adhere directly to the Lemon Lime CS layer.
Continue layering the strips and alternating popped up and adhered directly, creating a louver effect, like you see on shutters!
Finish adhering all the strips in an alternating pattern.
I adhered 5 Purple Fine Shimmer Gems to the card tucking two slightly under the popped up strips to accentuate the louver effect!

Try this technique with your scraps and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

florals in bloom sketch #102 card

florals in bloom sketch #102 card

Sketches are one great way to stretch that creative bone in your body that either needs some motivation or inspiration. When you are feeling like you need a little assist there are so many ways to get help!

Many demonstrators and groups post card sketch challenges or online databases of sketches, Pinterest is another great resource and I will be posting occasional card sketches to give my customers inspiration as well!

This card sketch is a SUPER simple one but is awesome for maximizing your 12″ x 12″ Designer Series Paper you can make 9 of these cards out of one 12″ x 12″ piece of paper!

And just by changing out the DSP the cards look totally refreshed and new!

Measurements:
BASE: Pretty Peacock 4 1/4″ x 11″
scored at 5 1/2″
DSP: 4″ square piece cut in half to make
(2) 2″ x 4″ pieces
Basic White CS: 4″ x 5 1/4″ and 1/4″ x 4 1/4″

I usually place a Basic White layer on the inside of the cards I make that use darker colored cardstock to make it easier to write on the inside of the card.
Cut the DSP in half paying attention to the DSP pattern and keeping the design together so the pattern flows once you adhere the DSP to the card front.

Take the top patterned piece and adhere it to the top of the card front leaving an 1/8″ border on the sides and top of the card stock.

Adhere the bottom DSP piece to the bottom of the card front leaving an 1/8″ border on the bottom and sides of the card front.
I stamped the horizontal sentiment stamp from the Blooming Phrases Online Exclusive stamp set that debuted this month in Pretty Peacock ink. I stamped the leaves at the end of the word line in Granny Apple Green ink on the Basic White strip.
Pop up the strip and adhere to the center of the card spacing it evenly in between the top and bottom DSP panels.
I added some two-toned sparkle gems to the card to finish this easy and lovely card!
This is another version with another DSP design from the Florals in Bloom collection.
Just changing the paper can make an entirely different card look!
Try this simple design with your stash of papers and see what you can design – one stamp at a time!

Happy Stampin’
Natalie

in color strips card

in color strips card

Today’s card features the Beautiful Gallery Suite of products and the new In Colors: Strawberry Slush, Timid Tiger, Darling Duckling, Cloud Cover and Secret Sea.

Measurements:
Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″ scrap for the stamp/die cut
Strawberry Slush CS: 4″ x 5 1/4″ and strip scraps
Timid Tiger CS: scrip straps
Darling Duckling CS: strip scraps
Cloud Cover CS: strip scraps
Secret Sea CS: strip scraps
Basic Black CS: scraps for the Beautiful Motifs
dies

Die cut the 4″ x 5 1/4″ layer with the second largest die in the Textured Notes die set.
Save the die for future use and use the frame outer edge.
Adhere the sides with tape and start to place strips over the back of the frame.
Finish lining the inside of the frame with the rest of the strips.
Stamp a sentiment on one of the strips.
Pop up the frame on Stampin’ Dimensionals and adhere to the Basic White card frame.
Stamp the large flower in Tuxedo Black Memento ink and die cut. Die cut the smaller floral images from the Beautiful Motifs die set in Basic Black CS.
Adhere the black and white floral die above and to the right of the sentiment.
Adhere the black die cuts over and under the stamped floral image.
Add 2025-2027 In Color Flat Pearls on the card front to finish off the card.

Now go and create some artwork of your own – one stamp at a time!

Happy Stampin’
Natalie

This is a sneak peak and the new products will not be available until May 6th and therefore will not be in the clickable pictures below.