gift card slider fun fold

gift card slider fun fold

Today’s post is a little late but as they say better late than never, right? Some days you just get tied up with unforseen duties!

This gift card slider fun fold is worth the wait though!

Measurements:
Summer Splash CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: (2) 4″ x 5 1/4″, scraps for
stamped sentiment and word die
Lemon Lolly CS: 2 3/4″ x 3 3/4″, 1 1/2″ x 6″
scored at 2″ and 2 1/2″
DSP: 3″ x 4 1/4″,2 1/2″ x 3 1/2″

Take one of the 4″ x 5 1/4″ and stamp the circle image from the Swirled Designs bundle in Summer Splash randomly around the layer.
Adhere to the card base.

I stamped the second 4″ x 5 1/4″ piece with one circle image and added it to the inside of the card.

Take the larger DSP layer and die cut a hole in the center I used one of the sentiment dies from the Words of Beauty die set.
Turn the DSP layer over and place Stampin’ Dimensionals around the perimeter with the exception of under the die cut hole.
Attach the smaller DSP layer to the Lemon Lolly matte piece.

Score the 6″ long Lemon Lolly layer at 2″ and 2 1/2″. Then add a piece of Tear & Tape between the two score lines. On the back side of the smaller section add another piece of Tear & Tape to the top edge.

Fold the Tear & Tape piece of cardstock so both score lines are resting against the back of the Lemon lolly layer at the middle top edge.
Remove the backing from the Tear & Tape and attach.
Slide the long edge through the die cut hole and remove the second piece of Tear & Tape.

Lay the Lemon Lolly matted DSP piece in the center of the bottom piece of DSP and rub over the area where the Tear & Tape will attach.

I die cut the word because from the Words of Beauty die set in three matching colors and adhered them together.

I die cut the long sentiment die and inked up the It’s Your Birthday in Summer Splash and stamped it on the die.

I adhered Stampin’ Dimensionals to the sentiment.
I die cut the intertwined circle die in Vellum and attached it to the back of the long sentiment piece then adhered both the words and sentiment piece to the outside card flap.

I added a punch to the bottom of the pull tab piece and added some Darling Duckling ribbon.

I added a matching gift card to the inside upper edge of the pull tab.
I added five Shades of Green Hexagons for the embellishments!

Pull the tab and reveal your gift card so stinkin’ cute and what a fun way to present the gift card!

Try this tutorial and make this slider gift card holder with your supplies – now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

birthday secret message slider card

birthday secret message slider card

Did you like decoder rings when you were little or secret messages like the ones with invisible ink? This card is a throwback to the those fun days! This is a Secret Message Slider Card featuring the Swirls Designs stamp set and the new Online Exclusive Splash of Sparkles Specialty Designer Series Paper.

Measurements:

BASE: Timid Tiger CS: 4 1/4″ x 5 1/2″
3 3/4″ x 4 1/4″, 2 1/2″ x 5″
Pretty In Pink layer: 5 1/4″ x 8 1/2″, scored at
2 3/4″ and 6 3/4″
DSP: 2 5/8″ x 5 1/8″, 1 5/8″ x 5 1/8″
Basic White CS: 2 3/8″ x 4 7/8″, 3 1/4″ x 4 1/8″

I stamped the circle image from the Swirled Designs stamp set in Timid Tiger ink to the two Basic White CS layers as shown.

Then I used the splatter image, the Enjoy the Ride and the Happy Birthday from the Boardwalk Fun stamp set in Versamark and heat embossed with Gold embossing powder and the Heat Tool.

I actually stamped the Enjoy the Ride on the 3 1/4″ piece after I photographed it – it will be the secret message you will see at the end!

With the 3 3/4″ side at the top of the 3 3/4″ x 4 1/4″ piece, score at 3/8″ for the inside slider piece.

Adhere the Basic White layers to the Mattes of Timid Tiger making sure that the score is on the left hand side of the smaller piece.

Score the Pretty In Pink cardstock layer at 2 3/4″ and 6 3/4″.

Adhere the 2 5/8″ x 5 1/8″ DSP piece to the inside left panel.

Adhere the 1 5/8″ x 5 1/8″ DSP piece to the outside right hand panel.
Add two small pieces of Tear-n-Tape to the upper and lower edge of the inside of the right side panel as shown in the photograph.
With the small tab to the left of the 3 1/4″ x 4 1/8″ adhere the Basic White stamped layer to the 3 3/4″ x 4 1/4″ Timid Tiger piece to the right of the score line.

Add a piece of Tear-n-Tape along the length of the inside slider piece on the 3/8″ tab to the left of the score line.

Place the inside slider piece to the right hand side of the score line. Peel off the release paper for the Tear-n-Tape.
Fold the front panel down over the slider piece.
Adhere the front stamped panel to the outside of the first panel.

]Open up the first panel and bend the slider piece back towards the inside of the card and use a bone folder to secure the Tear-n-Tape and crease the score line.

Remove the release paper of the two smaller pieces on the last panel.

Fold the right panel over the left hand edge of the slider piece and rub the areas where the Tear-n-Tape is to secure the panel over the slider mechanism.

Now as you open and close the front left hand panel the slider mechanism will slide in and out to reveal you message – cool right?

Just like when you where a little kid create one of these cards and send a hidden message to one of your favorite childhood playmates to remind them of all the fun you used to have as kids!

Here is a short video to show you the mechanism in action!

Now it’s your turn – go and create some interactive artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – petunia pop, daffodil delight and strawberry slush

more color mondays – petunia pop, daffodil delight and strawberry slush

Today’s More Color Mondays color challenge features the suite that debuts tomorrow on January 6th all of the great new projects become available in our new January to April 2026 mini catalog!

This sweet and whimsical fun fold card starts like a normally 4 1/4″ x 11″ card scored at 5 1/2″ but cut a little off one side and it allows you to see the inside of the card at a glance!

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″ cut 1 1/2″ off one side
DSP: 3″ x 4″ and 1 1/2″ x 4″
Strawberry Slush CS: 1/4″ x 4 1/4″
Petunia Pop CS: 1/4″ x 4 1/4″
Daffodil Delight CS: 1/8″ x 4 1/4″

Cut 1 1/2″ off the left hand side of the 11″ length. Save that piece and cut for the sentiment piece.
Cut the DSP at 3″ x 4″ and 1 1/2″ x 4″ – adhere the 3″ piece to the upper flap, leaving an even 1/8″ border on the top and sides.
Adhere the 1 1/2″ piece to the inside bottom of the card leaving a 1/8″ border on the bottom and sides.
Adhere the Colored cardstock strips below the 3″ DSP piece so that they cover the white section completely.
Adhere the Daffodil Delight strip and stamp the sentiment in Petunia Pop Ink and blend with a blending brush and Daffodil Delight ink over the sentiment. Pop up the sentiment on the right-hand side of the strips.
The Beach Boardwalk Suite comes with these fun Puffy Stickers so I decided to add a few for the coordinating embellishments around the sentiment – a yellow sun and two dots.
This finishes the card with more whimsy and color and hopefully will bring some sunshine to someone’s day!

Now it’s your turn and go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Reminder the Boardwalk Fun and Beach Boardwalk items are SNEAK PEAK until tomorrow and therefore will not be in the photo links below as they are not available just yet – but only 24 MORE HOURS TO GO!

card sketch #115 – get inspired with sketches

card sketch #115 – get inspired with sketches

Today’s post is all about simplifying the creative process! Ever feel stumped sitting at your desk with a lot of choices and no clear direction? All of us get that way – I find I lose my mojo when my space is messy – but I can get in a creative slump at any time and when I do using a card sketch can prime the creative juices into flowing again!

So today’s card sketch #115 is all about getting the creative juices flowing with a simple layout!

I had so much fun with this sketch that I have a bunch of samples to show you different ways to make this sketch come to life!

Measurements:
BASE: 5 1/2″ x 8 1/2″. scored at 4 1/4″
DSP: 1″ or 1 1/8″ x 3″
Layers: (2) 4″ x 5 1/4″
Scrap for sentiment focal point
scrap for die cut

The perfect thing about a sketch is that it is only a spring board for your imagination!

The pool party sections in the sketch can be DSP, cardstock, embossed cardstock, stamped background images and anything else your creative soul can devise!

That is what I love about sketches even though everyone starts with the same template the outcome is whatever you can make of it!

In my first example I cut the DSP strips at 1 1/8″ x 3″ and adhered them to a Basic Beige 4″ x 5 1/4″ layer.

I die cut from an Old Olive scrap a Textured Notes rectangular die and stamped Love and Hugs sentiment from the Greenery lane stamp set in Mossy Meadow ink for some contrasting color.
I adhered the Basic Beige layer onto a Mossy Meadow card base and popped up the sentiment layer on Stampin’ Dimensionals.
I die cut a greenery piece in Basic Beige scrap from the Greenery Lane die set and adhered it to the bottom portion of the sentiment die.

I added three Antique Pearls to the sentiment layer around the words to highlight them!

Since the base is a darker colored cardstock I added a Basic Beige layer stamped with a leaf image from the Greenery Lane stamp set in Mossy Meadow ink to tie the whole card together!
The second sample I used a different page from the Nature Walk DSP like the first card but changed the color scheme and made the DSP strips 1″ x 3″ for a little paper saving I cut a 3″ x 4″ DSP piece and cut into (4) 1″ x 3″ strips! I just needed to adjust the space in between the strips on the card front.
I used Crumb Cake, Pecan Pie and Early Espresso with the script DSP pieces and stamped the inside as well!
In my third sample I used embossed cardstock strips with the new Online Exclusive Beautiful Pattern 3D embossing folder. and the sentiments and die from the Boardwalk Fun bundle from the upcoming 2026 January to April mini catalog available on Tuesday!
I still had all the cardstock out from yesterday’s post card and I used the same colors Pretty in Pink, Flirty Flamingo and Bubble Bath!
For my last sample I made my own DSP by stamping images on a 3″ x 4 1/2″ piece of Basic White cardstock using Pretty Peacock, Poppy Parade and Granny Apple Green ink and images from the Greenery Lane stamp set.

I cut those into 1 1/8″ x 3″ pieces keeping them in order so the stamped pattern flows from strip to strip!

I embossed the vertical piece and popped up a sentiment over the Poppy Parade layer!

Use your imagination for the strips make them different sizes or from different colors and materials! See what you can design – now go and create some artwork of your very own – one stamp – one sketch at a time!

Happy Stampin’
Natalie

Remember the SNEAK PEAK items will not be listed in the photo links below until they are available on January 6th!

And plan on joining me next Saturday for my new catalog open house!

double front flap fun fold card – boardwalk fun bundle

double front flap fun fold card – boardwalk fun bundle

Happy New Year! Normally I post on Monday-Wednesday – Friday of each week but I wanted to wish you all a great and creative NEW YEAR! Happy 2026 – can you believe it’s another new year? They seem to come faster and faster these days LOL!

Today’s card is a very simple double front flap fun fold card! Follow along and learn how to make one of your own!

Measurements:
BASE: Pretty in Pink CS: 5 1/2X 8 1/2″
scored at 4 1/4″
Bubble Bath CS: 3 1/2″ x 4 3/4″
Flirty Flamingo CS: 3 1/4″ x 4 1/2″
DSP: 3″ x 4 1/4″
Basic White CS: 1″ x 3 1/4″, 4″ x 5 1/4″

Thanks to Juli B. for the initial inspiration. I am using the Beach Boardwalk Suite Collection of products and just a reminder these will be available in this coming Tuesday and will not be able to be included in my photo links below until after their release to the general public. These are available in a starter kit and to active demonstrators currently!

Take the BASE and score in the center at 4 1/4″ then cut 1 1/4″ off the left-hand edge.
Score the 1 1/4″ cut piece at 3 1/2″.
Glue the smaller tab with Multipurpose liquid glue and match the score line up with the edge of the BASE paper’s right-hand edge. Adhere down at the level you want it to swing over the front.
Emboss the front flap – this could have been done at the beginning as well. I used the Beautiful Patterns 3D embossing folder which is an Online Exclusive from the Brushed with Beauty Suite.
Stamp the Celebrate on the right-hand edge of the 1″ Basic White piece and the Happy Birthday in the center of the 4″ Basic White layer in Pretty in Pink ink.
Adhere the 4″ Basic White layer on the inside of the card base to cover the Pretty in Pink flap insert.
Add ribbon in a knot around the left-hand edge of the 1″ Basic White piece and adhere to the small flap.
Adhere the DSP to the Flirty Flamingo layer and then adhere those to the Bubble Bath layer.

Adhere that flap layer to the card front being careful to measure where you want to adhere – sometimes I eyeball that but if you are uncertain you can place the layer where you want it and add a sticky note to the back edge then you will know where to place the glue only on the right-hand side of the sticky note and you will not inadvertently glue your card together!

I added three Pretty in Pink 2024-2026 In Color Flat Pearls (LOL – I actually added the 2025-2027 Strawberry Slush Pearls because that is what I had but the worked great with a slightly darker pink hue – use what you have!) to the card front for a coordinated bit of bling to finish this fun birthday card.

I always have a tendency in the winter especially after a large snow storm to make wistful summery cards – so here is your little bit of sunshine for today instead of all this snow outside my Stampin’ Studio!

Now go and create something fun today for the first day of the new year – one stamp at a time!

Happy Stampin’
Natalie