#CI126 butterfly flight hot foil bundle

#CI126 butterfly flight hot foil bundle

I am always looking for inspiration – and Colour Inkspiration #126 offered a lovely color combination of Soft Sea Foam, Fresh Freesia, and Blackberry Bliss. So this card was born of that color challenge.

Measurements:
BASE: Blackberry Bliss CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 1″ x 4″
Soft Sea Foam CS: scraps for dies
Basic White CS: (2) 4″ x 5 1/4″, scrap for the
sentiment piece

Using the Hot Foil system, I foiled the Butterfly Flight hot foil dies in Silver Opal Foil.
Emboss the 4″ x 5 1/4″ Basic White layer with the Rustic Check 3D embossing folder.

Adhere to the Blackberry Bliss card base.

Die cut the small butterflies out of the 1″ x 4″ Blackberry Bliss CS layer. Adhere to the bottom of the embossed layer.

Color the foiled butterflies in Soft Sea Foam, Fresh Freesia and Blackberry Bliss. Pop up the two larger butterflies. Adhere the Soft Sea Foam CS dies and the Blackberry Bliss CS small butterflies around the card.

Stamp the sentiment in Blackberry Bliss ink from the All A Flutter stamp set on a Basic White CS scrap. Blend the edges and cut a banner edge. Pop up the sentiment piece in between the butterflies.

Add three Adhesive-Backed Metallic gems around the sentiment piece.

Color challenges are full of inspiration – try finding some inspiration of your own – one stamp at a time!

Happy Stampin’
Natalie

reverse hot foiling

reverse hot foiling

I HATE WASTE! That is one of my pet peeves and before Stampin’ Up!~ introduced our NEW Stampin’ Hot Foil System – I had never done any foiling. Being new to the process I thought I was going to hate using only a fraction of the foil and having to throw it away mostly unused BUT…I didn’t know about the process of Reverse Foiling and it is SOOOOO COOL!

Not only can you use the same piece of foil twice but you can make double the projects!
I was so excited when I learned about reverse foiling and today I am going to show you the cards I made with some of the foil I saved from my first blog post on July 17th!

I saved the foils from the Sweetly Sentimental hot foil dies and the Butterfly Flight Hot Foil dies that made this card below! You will see that the butterflies are gold outlined and not foiled on the inside. When you reverse foil you take the same piece of foil so that the hot foil image will be totally reversed!

Turn the machine on the white on button will light up and the red light will blink while heating up – once the plate heats to temperature it will beep and you will place the foil directly onto the plate surface.

(The foil in this picture is one that folded on itself during the process and is just being used here for the photos as I forgot to photograph the actual foil!)

Place the cardstock over the foil.
I am using the large flat surface on the back side of the Garden Silhouette Hot Foil die but the NEW Hot Foil release Available to customers on September 1st has a Reverse Plate for sale that is made for this purpose! Place the flat side down on the the surface over the cardstock and press the white button. The yellow light will start to flash. This is heating up the die plate and will take 1-2 minutes.

Once this beeps all the lights will be on and you can place the Hot Foil Shim over the die and then the Hot Foil Plate on the top of the sandwich. Unplug and run slowly through the Stampin’ Cut and Emboss machine.

#170043 Reverse Hot Foil Die $27.00 this is flat on both sides and is made solely for the reverse foiling technique.

The Garden Silhouette works for most reverse projects and you get the bonus of a lovely image on one side to use for beautiful cards!
Your choice!
#170041 Garden Silhouette Hot Foil Die $37.00

This is a photo of the Garden Silhouette die hot foiled on Basic White cardstock.
I saved the foil and ran it through with the reverse Hot Foiling technique and this is what the reverse foiling looks like!

(Watch for what I do with the regular Garden Silhouette foiling next week!)

In July I used the Butterfly Flight and Sweetly Sentimental Hot Foil Dies and saved the foil.

I ran both through the machine using the Reverse Hot Foiling Technique and this is what I got!

This is the difference between foiling and reverse foiling with the Sweetly Sentimental bundle.
Both bundles come with cutting dies and I ran them through the Stampin’ Cut and Emboss machine to cut out the foiled images and words – I also used all the extra foiled paper for the smaller double butterfly die.
Measurements:
BASE: Basic white CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, (2) 4″ x 5 1/4″ for foiling,
(1) 4″ x 5 1/4″ for embossing

I embossed one of the 4″ x 5 1/4″ layers with the Fern & Flora 3D embossing folder and adhered it to the Basic White Base card for a great white on white background.

I adhered two of the larger reverse Butterflies and four of the smaller dies to the card along with the Sweetly Sentimental sentiment die in the middle popping up everything on Stampin’ Dimensionals except the four small butterflies.

I added three gold Adhesive-Backed Metallic Gems to finish off this stunning card!
Measurement for Card #2
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4″ x 5 1/4″, 5 1/2″ x 8 1/2″

I used the reverse Garden Silhouette hot foil in silver and cut the individual flowers out.

I embossed the 4″ layer with the Forever Plaid embossing folder and adhered it to the card base. I layered the flowers some popped up and some tucked behind and added a Classic Greetings hot foil sentiment underneath the bouquet. I added Basic Rhinestone Jewels and finished off this bonus reverse card.

Have you had the opportunity to see it – I will be demonstrating it at my August Studio Stamp-a-Stack on August 24th. Come and stamp with us and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – pretty peacock, lost lagoon and pool party

more color mondays – pretty peacock, lost lagoon and pool party

I have been on a little monochromatic tear recently but I love these three color blues together and thought they would be pretty cool used with the new Butterfly Flight masks!

I am loving our new Stampin’ Hot Foil System – it is so amazing and I love the elevated effect it gives your cards and projects!

Check out today’s More Color Mondays color challenge with Pretty Peacock, Lost Lagoon and Pool Party accented with the gold foil!

Measurements:
BASE: Pool Party CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 4 1/8″ x 5 3/8″, 3″ x 4″
Basic White CS: piece large enough to cover
the Butterfly Flight hot foil die
Pretty Peacock CS: piece large enough to cover
the Sweetly Sentimental hot foil die

I used three of the Butterfly Flight hot foil butterfly dies from my first card introducing the new Stampin’ Hot Foil System in last Friday’s blog post.

I placed the die cuts back into the negative die spaces to hold them in place for the mask coloring.

Check out Friday’s post if you want to see the Stampin’ Hot Foil System in action and the details of how to make the Butterfl;y Flight Hot Foil Dies.

I placed mask #1 over the paper with the three butterfly dies in it and drew a pen line around the notch in the plastic mask (I also placed a line down the left hand side of the edge so that each subsequent mask will line up in the same place.)
Using a blending brush and the Pool Party ink brush through the mask openings until all the open spots are inked.

Remove Mask #1 and replace with Mask #2

Using Mask #2 and the Pretty Peacock ink – blend through the holes over the three butterfly dies until desired color is reached.
Lastly remove Mask #2 and place Mask #3 over the three hot foil butterfly dies. Brush through the openings until you are satisfied with the coloring.
Remove the mask.
The end result is stunning and so easy to professionally color these!
Using the same set up and directions as in Friday’s blog post set up the Sweetly Sentimental Hot Foil dies and create a lot of great sentiments for this and future projects!
I love the options with the Beautiful Ordinary Life DSP gorgeous, colorful watercolor washes on one side and black and white on the other.

Adhere the 4 1/8″ x 5 3/8″ DSP layer to the card base – I choose the black and white side for the larger layer and the colorful side for the smaller layer. (you could reverse them for a totally different look!)

adhere the 3″ x 4″ DSP colored. side up a llittle askew over the black and white DSP layer.

Pop up the butterflies with Stampin’ Dimensionals and choose your sentiment and pop that up with Foam Adhesive Strips in the center of the card.

Adhere Sunset Sparkle Sequins to the card and you have completed an easy DSP card for a special birthday!

Let me know if you would like to know more about the Stampin’ Hot Foil System and now it’s your turn to create some artwork of your very own -one stamp at a time!

Happy Stampin’
Natalie

introducing the hot foil system!

introducing the hot foil system!

OK by now most of you know if you use the internet at all – WE HAVE BEEN SITTING ON A MASSIVE SECRET SINCE MARCH – and it was big and exciting and hard to keep quiet BUT WE DID IT!!!!

In March I was among the lucky demonstrators that were made to put there phones away and promise to stay silent about a new product coming to market this summer! Then Stampin’ Up! management detailed OUR NEW HOT FOILING SYSTEM! They demonstrated to lots of OOOHS AND AAAAHS and boy is it incredible! I just got mine and documented the easy steps to makeing NEXT LEVEL CARDS!

Measurements:
BASE: Crumb Cake CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic white CS: (2) 5 1/2″ x 8 1/2″
Basic Black CS: 1/2″ x 5 1/2″

The Hot Foil System comes with the plug and the platform, 2 silicone trays, a hot foil shim, a hot foil spacer and a heavy duty magnet tool to move the hot dies off the machine!

Here is the heating platform. Place it on the silicon platform before starting.

The hot foil dies are heavier and a muted metal tone so they are very easy to distinguish from our regular dies.

Choose a large enough piece of cardstock to cover the die.

Cut a large enough piece of foil off the roll to cover the die.

(Save the foil paper once you are done and I will show you how to not waste a shiny morsel in an upcoming blog post!)

Plug the power cord into the platform. The magnetic plug will snap into place. Press the white button to turn on the heating system. The platform beeps and all the lights briefly flash. During the heating process (approximately 6 minutes) the white timer button stays lit and the red light flashes. When the platform is ready to use, it beeps again. When it beeps again the red light stays solid , and the white timer button flashes.

Once the platform beeps, place the flat side down on the surface of the platform and press the white timer button again. The platform beeps and the yellow light flashes while the die heats (approximately 1-2 minutes) The white timer button and the red light stay lit. When ready the platform beeps again and the green light turns on, and all of the lights will be lit.

Place the foil shiny side down over the heated die.
Place the cardstock over the foil.
Place the Hot Foil Shim over the cardstock.
Place the Hot Foil Spacer over the Hot Foil Shim and your sandwich is complete.

Unplug the platform and place on the Stampin’ Cut and Emboss machine.

Run the sandwich through SLOWLY – twice – DO NOT RUSH THE PROCESS – need to go slowly to allow the foil to adhere to the cardstock.

Remove from the Stampin’ Cut and Emboss machine.

Remove the shim, spacer and foil and paper and with the Magnetic pick up tool – pick up the hot die and place on the other silicon cooling pad.

Peel the foil off of the cardstock and you are left with the most elegant image!
I fussy cut the Botanical Glow Hot Foil out and did the same Hot Foil process with the Butterfly Flight dies and put together this card!

It is stunning folks I cannot begin to tell you how addictive this is!!!

Now it is your turn to create something beautiful – go and stamp – one stamp at a time!

Happy Stampin’
Natalie