more color mondays – golden glow, cajun craze and pecan pie

more color mondays – golden glow, cajun craze and pecan pie

Today’s More Color Mondays color challenge feels like Fall – Golden Glow, Cajun Craze and Pecan Pie embrace the cooler weather that seems to have come in early this year.

The August Product of the Month Specialty Paper Glow of Harvest is just luscious with a sparkling pearlized surface with a pearl base and gorgeous Fall colors of Cajun Craze, Crumb Cake, Early Espresso, Golden Glow and Pecan Pie!

I love the ease and simplicity of a Z fold and a double Z fold is twice the FUN! Today’s card is a stunning I Love you fun fold – join me for all the details!

Measurements:
BASE: Golden Glow CS: 4 1/4″ x 11″
scored at 2 3/4″ and 5 1/2″ and 1 1/2″ x 11″
scored at 2 3/4″ and 5 1/2″, 3″ square
DSP: 1 1/4″ x 5 1/4″, (2) 1 1/4″ x 2 1/2″ scraps
for fussy cutting
Pecan Pie CS: 4 1/4″ square
Cajun Craze CS: 3 3/4″ square
Very Vanilla CS: 4″ x 5 1/4″ inside layer

Score the 4 1/4″ x 11″ piece of Golden Glow CS at 2 3/4″ and 5 1/2″. Then score the 1 1/2″ x 11″ piece the same and rotate it 180 degrees so that the longer side is on the left.

Adhere the 2 pieces of 2 1/2″ x 4″ DSP layers to the 2 smaller panels of the 4 1/4″ base card.
Adhere the 1 1/4″ x 5 1/4″ DSP piece to the longer section of the 1 1/2″ wide z fold piece.
Adhere the two smaller 1 1/4″ pieces to the smaller sections to the right of the 5 1/4″ piece just adhered.

Adhere the 4″ x 5 1/4″ Very Vanilla layer to the inside panel of the card base.

Adhere the backside of the outer smaller 1 1/2″ piece to the outside edge of the Very Vanilla covered inside panel.

Close the Z fold on the card base and adhere just the outside two inches to the outside DSP panel.

Die cut the largest die from the Spotlight on Nature circle dies on the Pecan Pie layer.
Die cut the next circle down on the Canjun Craze layer.
Die cut the next size down on the Golden Glow layer.

Plug in and heat up the Stampin’ Hot Foil plate by pressing the White button. Allow the plate to heat up – the red button will blink for about 6-8 minutes.

When it beeps and the yellow light starts blinking place the hot foil die right side up and leave to heat up on the plate until the machine beeps again. Then place the foil shiny side down, then the paper, then the shim and spacer down. Unplug the machine and run through the Stampin’ Cut and Emboss machine slowly.

I used the new FRAMED AND FABULOUS HOT FOIL DIE BUNDLE with the new Copper Foil perfect for Fall projects!

I stamped a sentiment in Golden Glow ink in the center of the Copper Hot Foiled Golden Glow die piece.
Adhere the three concentric circle dies together and fussy cut some flowers and leaves from the Glow of Harvest Specialty Paper and adhere around the sentiment piece.
I placed pop up Stampin’ Dimensionals on the left hand side of the sentiment focal piece and add to the first Z fold panel.
This is what the double z fold card looks like expanded – pretty isn’t it?
I added some Antique Pearls to the card base to finish off this fun fold Fall card! This paper takes this card to the next level with it’s lustrous finish!

Now it’s your turn to make some Fall cards to make someone’s day! Go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

The Copper Stampin’ Hot Foil Rools and the NEW Framed and fabulous are coming soon they are SNEAK PEAKS for the upcoming release and will not be pictured on the photo links below!

glow of harvest specialty designer series paper

glow of harvest specialty designer series paper

I used a recent card sketch #129 and created a simple card from this sketch with the new August Product of the Month Specialty Paper called Glow of Harvest!

I wish you could see this paper in person it has a beautiful pearlized surface that glitters in the light!

Measurements:
BASE: Very Vanilla CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, scrap for die, 4″ x 5 1/4″
DSP: 2″ x 5 1/4″

I embossed the 4″ x 5 1/4″ Very vanilla CS layer with the upcoming Softly Woven 3D embossing folder from the September-December 2026 catalog debuting next Tuesday, September 1st.
Adhere to the Very Vanilla CS base.
Adhere the 2″ x 5 1/4″ layer of DSP to the left-hand side of the card base.
I stamped the Thinking of You sentiment from the upcoming Thinking of You Bundle from the new catalog in Crumb Cake ink and blended the edges of the Spotlight on Nature circle die.

I added Antique pearls around the sentiment to finish off this easy card made special with this gorgeous pearlized specialty paper!

I had a shorter piece of DSP so I created the same card with this piece.
I cut two different patterns of the Glow of Harvest DSP into 1″ x 4″ strips and added every other pattern to the card front of a Cajun Craze card base.

I added a small piece of Golden Glow ribbon and adhered it under the sentiment strip using the Thinking of You stamp set in Golden Glow ink and blended with the same ink.

I added three 2026-2028 In Color Golden Glow dots to finish off this easy DSP card with coordinated flair.

My last sample uses the Thinking of You dies colored the inside with Calypso Coral ink and blending brush and adhered to a 4″ x 5 1/4″ piece of DSP and a Pecan Pie cardstock base. I fussy cut a white pumpkin from another pattern and popped that up under the die words. I finished this card off with more Antique Pearls!

If you have a wish list and love this Fall themed paper get it for $5 with your qualifying order and make some easy Designer Series paper Fall cards with this August Product of the Month!

Now it’s your turn to create something beautiful – one stamp at a time!

Happy Stampin’
Natalie

PS – all upcoming SNEAK PEAK products will not be shown in the photo links below until they become available September 1st!

more color mondays – pretty peacock, lemon lime twist and pool party

more color mondays – pretty peacock, lemon lime twist and pool party

Today’s More Color Mondays color challenge is also a sketch challenge! It’s a Twofer as we say in my family – two for the price of one LOL!

This is a great way to use scraps as well! Lots of great ideas in this card!

Measurement:
BASE: Lemon Lime Twist CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 1/4″,1/2″and/or
3/4″ strips that are at least 3″ in length
Basic White CS: 3″ square, 3 1/2″ x 4″ scrap for
die cut
Pool Party CS: 3 1/4″ square, 1/4″,1/2″and/or
3/4″ strips that are at least 3″ in length
Pretty Peacock CS: 1/4″,1/2″and/or
3/4″ strips that are at least 3″ in length

Take the Basic White CS square and add adhesive over the entire surface – I used Stampin’ Seal around the edges and a strip or two in the middle. Lay cardstock strips over the Basic White cardstock to cover the entire square and the trim the overhang.
Add Stampin’ Dimensionals on the Basic White layer backside. Adhere to the Pool Party square.
Adhere the colored cardstock strip focal point onto the top center of the card. Adhere a white leave die over the popped up strips, in this case I used the leaf die from the Nature’s Symphony die set.
Stamp the sentiment from the WIld Bunch Product of the Month stamps et in Pretty Peacock ink centered below the strips.
Adhere the Dots embellishments around the sentiment to finish off the card!
With just a few tweeks you can get a different look – I had a die cut that ripped so I used the smaller section to make an additional card using the butterfly stamp and die from the Extraordinary Life Bundle. I stamped them in Pretty Peacock ink and then added Wink of Stella over them for a nice subtle sparkle!

Try your hand at this strip card design today and let me know what you design! Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

product of the month – wild bunch card

product of the month – wild bunch card

Today’s card features the newest Product of the Month incentive – spend $75 before shipping, tax and coupons and this sweet set of whimsical animals and sentiments can be yours for $5!

This card also uses Card Sketch #124! Play along and make a card using this sketch – if you do send me a photo I would love to see your interpretation of the sketch. I love sketches, especially when you need a little inspiration and don’t we all sometimes! Remember a sketch is just a starting point! Here I turned the sketch on it’s side and used it in landscape instead of portrait mode!

Measurements:
BASE: Crisp Cantaloupe CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 1/4″ strip
Basic White CS: 4″ x 5 1/4″, scraps for stamping
animals, 1/2″ strip

Stamp each of the animals from the Wild Bunch stamp set in the Basic Black Hybrid Ink Pad on a scrap piece of Basic White CS.

Stamp the Happy Birthday sentiment on a 1/2″ Basic White CS strip and then stamp the checkered pattern on either side of the sentiment in the Basic Black Hybrid ink pad.

Here is a SNEAK PEAK of the recent pre-order for the July Online Exclusives – remember we now offer Online ONLY stamps and bundles and other goodies to keep our offerings fresh and exciting so do not forget to peruse the Online ONLY catalog so you do not miss all the new offerings!

This is a very sweet embossing folder called Swirls of Magic and is my favorite new item from the July pre-order!

It pairs perfectly with these whimsical animals!
I embossed the 4″ x 5 1/4″ Basic White layer.

Adhere the embossed layer to the Crisp Cantaloupe CS base.
Adhere the 1/4″ x 5 1/4″ Crisp Cantaloupe strip across the bottom of the Basic White embossed layer.
Color in the animals with Crisp Cantaloupe, Smoky Slate, Golden Glow, Gray Granite, Crumb Cake, Darling Duckling and Barely Blush Stampin’ Blends markers.
Color the openings in the letters and the blocks with the Crisp Cantaloupe Shimmer Brush for some subtle sparkle on the 1/2″ Basic White sentiment strip.

Adhere the 1/2″ strip above the Crisp Cantaloupe 1/4″ strip across the bottom of the card.

Start on the right-hand side of the card and start adhering the animals above the sentiment strip on the card.
Adhere the animals across the width of the card – popping up one of them I chose the snail to pop up above the Happy Birthday sentiment!
Wrap the Crisp Cantaloupe ribbon around the top of the card front and tie in a knot.
I added two Crisp Cantaloupe 2026-2028 In Color Dots to the card around the sentiment!
I decided I wanted a little more sparkle on the card so I added a little more shimmer brush to the cow’s muzzle and the snails shell! It is hard to see in photos but the shimmer is very fun!
Try this sketch when you have some free crafting time and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

P.S. Reminder: The Swirls of Magic embossing folder will not be available until the July Online Exclusives are released so it will not appear below in the photo clickables because it is not available to the public to order yet!

split front berry botanical vellum card

split front berry botanical vellum card

Today’s More Color Mondays card features the newest Product of the Month – Berry Botanical 12″ x 12″ Vellum.

This fun fold card is a split front card.

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, 4 1/4 x 5 3/8″, (2) 1″ x 5 1/4″,
scrap for the sentiment
Vellum: 3″ x 5 3/8″
Strawberry Slush CS: (2) 1″ x 5 3/8″

Cut the card front at 1 1/8″ from the left hand edge of the card – from the score line to the top of the card edge.
Cut the same slit on teh right hand side of the card front.
Place Stampin’ Seal on the inside edge of the two outside panels.
Attach the Vellum to the two panels.
Place the two pieces of Strawberry Slush CS on the inside panels.
Emboss the Basic White CS layer with the NEW Floral Spray 3D embossing folder.
Cut into three pieces (2) 1 1/8″, and 2″ pieces.
Attach the 2″ embossed piece to the center panel of the card front.

Attach the (2) 1 1/8″ on the outside of the card inside.

Color the center embossed flower with the Strawberry Slush ink and a blending brush.
Emboss the (2) 1″ x 5 1/4″ and adhere to the card front outside panels.
Die cut from the Spotlight on Nature dies and Stamp in Strawberry Slush ink a sentiment from the Splash and Relax stamp set and brush the edges of the circle die.

Pop up the sentiment piece and place over the embossed panel on the right hand side of the card front.

Place three In Color Dots on the card to complete this fun multi leveled split front fun fold card!

Now it’s your turn to go and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie