card sketch #119 – 4 cards from one 6″ x 6″ DSP

card sketch #119 – 4 cards from one 6″ x 6″ DSP

This card sketch inspired 4 cards from this one sheet of gorgeous Thoughtful Journey DSP this was a carryover product last year and I do not anticipate that it will be carried over again so If you love watercolor landscaped images get this paper before it is gone!

Card sketch #119. is here and what will you do with it – so many possibilities!

Measurements:
BASE: Basic White CS: (2) pieces of 8 1/2″ x 11″
Score one at 4 1/4″ and then cut on the 11″
side at 5 1/2″, score the other at 5 1/2″ and
then cut at 4 1/4″
(4) 3 1/4″ squares, scraps for sentiments
DSP: (1) 6″ x 6″ sheet cut into (4) 3″ squares
then cut each 3″ square into (3) 1″ strips
Mossy Meadow CS: (4) 3 1/2″ squares

Emboss each of the card fronts of the card bases in the Birch Wood 3D embossing folder.

Cut each of the 3″ squares into 1″ strips, keeping in order adhere them to the 3 1/4″ Basic White squares.
Adhere each of the 3 1/4″ white squares to the 3 1/2″ Mossy Meadow CS squares.
Adhere the first square to the center of one of the embossed card fronts.
Stamp a sentiment from the Wonderful Thoughts Bundle and then die cut around the words. Adhere to the card front over the DSP.
Do the same for the rest of the cards! I added a few left over die cuts from a previous card from the Springtime Scenes die set on the last card!
two different card orientations but basically the same sketch!
Adhere three Natural Matte Dots to finish off the card with some coordinating embellishments. These gender neutral cards are perfect for ANY occasion just by changing the sentiment and the Wonderful Thoughts bundle is a great all sentiment set.

Check these items out before they leave!
Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

creating unforgettable details in card making or scrapbooking

creating unforgettable details in card making or scrapbooking

Sometimes creating something special for a card or a scrapbooking page makes that piece memorable or a little extra special.

This week I am going to be at our national convention called OnStage 2026 and I created a bunch of swap cards for the event.

We are expected to use only current products and current colors, so I modified a card I did a few weeks ago and instead of using Designer Series Paper to create the beach blanket in my beach scene I wanted to create a beach blanket made out of background paper that I made.

I looked through my embossing folder as I knew that I wanted to add texture on top of whatever background design I created and decided that the Beautiful Patterns would be a great choice to mimic a blanket texture and design!

I wanted to do matching colors for the card I had designed so I started with Crumb Cake and Balmy Blue inks and did a watercolor wash striped design on our Basic White Cardstock alternating with two wide brushes from our Water Painters three brush sets.

I then dipped my very wet brush into the lid of the stampin’ pad filled with ink refill dots of ink and tapped the side of the brush with my bone folder over the watercolored paper to create a splatter effect.
I decided that the Beautiful Pattern 3D embossing folder would create a nice embossed design over the paper, so I ran it through our Stampin’ Cut and Emboss machine with the BASE #1 and Embossing #4 Plates.
I cut the 5 1/2″ x 8 1/2″ embossed layers into
1 1/2″ strips.
Then I cut the 1 1/2″ strips into 2″ segments so I created a little rectangular blanket shape.
I took our knife edged scissors which unfortunately are no longer for sale – but use a sharp scissors to cut small fringe across the short edges on both sides.
I added the blanket to the sand of my beach scene card!
Then I proceeded to make 99 more! LOL – now I am ready to swap!

Cannot wait to show you all the great cards I will be trading for in the next coming days! I will have all of them on display at this month’s Stamp-a-Stack class on the 23rd!

Make sure that you RSVP!

Now I am off to visit and stamp with new and old friends – hope you are getting to do the same! Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

card sketch #117

card sketch #117

Today’s card continues the series on Card Sketches with #117!

This simple sketch provides plenty of creative inspiration with a layer and a double matte with sprigs behind it. I followed the sketch quite literally but later on next week I will show you another card from this same sketch with a completely different look!

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4″ x 5 1/4″ layer, and scrap
for the die
Vellum CS: scrap for the sentiment matte
Lemon Lime Twist CS: 1/2″ x 4″, and scrap for
the die

Emboss the Basic White CS layer with the Stone and Vine 3D embossing folder.
Adhere the embossed layer to the card base.
Take the 1/2″ x 4″ Lemon Lime Twist CS strip and adhere it to the center of the card front.
Die cut two concentric circles from the Spotlight on Nature dies. The smaller one in Basic White CS and the next size up in Vellum CS.

Stamp the sentiment in Lemon Lime Twist ink and color the edges with a blending brush and the same ink.

Adhere the Basic White stamped circle onto the vellum circle with Stampin’ Seal.

Pop up the sentiment vellum circle with Stampin’ Dimensionals – making sure to stay inside the Basic White circle outline.
Die cut the large leaf sprig die in Lemon Lime Twist cardstock and cut into 2 pieces.
Attach the sprigs to the sentiment piece and adhere the sentiment focal piece to the card over the Lemon Lime Twist strip.
I added Holographic Resin Dots to the card for a little sparkle to complete the card!

Try your hand at this card sketch – if you are new to sketches try it literally as the sketch is drawn or be creative and use the sketch as a launching point and go crazy with ideas!

Let me know what you make – now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

vellum is back!

vellum is back!

I cannot tell you all how excited I am that Vellum cardstock is BACK!!!

Gone for only a little while but certainly long enough to be missed! This translucent cardstock elevates any project so easily! Today’s card is a super simple one but looks like you put in all the effort!

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″
Brushed with Beauty DSP: 4″ x 5 1/4″
Vellum Cardstock: 4″ x 5 1/4″
Calypso Coral CS: scrap for the die cut

Run a 4″ wide layer of Vellum Cardstock through the Stampin’ Cut and Emboss machine using the BASE plate #1 and embossing plate #4 with the Sunflower 3D embossing folder.
Cut the calypso Coral piece of Brushed with Beauty DSP to 4″ x 5 1/4″.

Apply the All Purpose Liquid glue with the larger flat tip to the entire 4″ x 5 1/4″ DSP surface.

Cut the vellum to 4″ x 5 1/4″ size and adhere to the DSP piece.

Adhere the Vellum/DSP layer to the card front of the card base.
I used the banner from the Stylish Shapes dies set and die cut a scrap of Calypso Coral.

Stamp the “Get Well Soon” from the Friendly Foliage stamp set in Calypso Coral ink to the banner.

Pop up on Stampin’ Dimensionals and adhere to the card front.

Adhere five Pearls of Beauty embellishments to the card front. Easy Peasy this impressive card is complete!

Try embossing vellum today and go make some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

jolly holly cut out card

jolly holly cut out card

Did you know that the Jolly Holly Online Exclusives bundle contains a hybrid embossing folder that does a PARTIAL die cut on the holly background! This is such a cool technique – you can gently bend the holly leaves up to give the card front extra depth and dimension or tuck a sentiment card in between the holly leaves like I did on this card!

Measurements:
BASE: Cherry Cobbler CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, scrap for the word die
Garden Green CS: 4″ x 5 1/4″
Basic White CS: 4″ x 5 1/4″, scrap for the sentiment matte and the holly dies

Hybrid emboss and die cut the Jolly Holly leaves on the Garden Green CS layer.
Stamp two holly clusters in Garden Green ink. Using a Blender Pen pull the green ink inward to color the holly leaves. Using a Cherry Cobbler dark Stampin’ Blends marker color the berries in the holly clusters.

Die cut the White sentiment rectangle from the Jolly Holly die set, two holly leaf bundles and the word joy from the Cheery Cobbler CS.

Pop up the embossed background on Stampin’ Dimensionals onto the Cherry Cobbler card base.

Tuck the white sentiment rectangular die cut into the partially cut holly leaf background. Adhere with a little dab of Multipurpose Glue on the back of the sentiment rectangle and under the holly leaves that go over the rectangle.

Glue the Joy die to the sentiment matte and pop up the colored holly leaf beside the word.

Adhere the 4″ x 5 1/4″ Basic White CS layer to the inside of the card.

I saved the 1/8″ strip I cut from the Garden Green CS and adhered it to the White layer.

Adhere the other colored holly leaf onto the Garden Green strip.

I adhered three red Traditional Sparkling Sequins around the sentiment to finish off this easy and fun Christmas card!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie