combining scenic coast dsp and rolling waves

combining scenic coast dsp and rolling waves

I saw a similar card the other day and loved it so this is my version I colored the dies a little differently than the sample I saw – I wanted to imitate the reflections of the sun on the water on the dies.

This Scenic Coast DSP is so gorgeous anything you do with it elevates the project to next level!

Measurements:
BASE: Strawberry Slush CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 6″ x 6″
Basic white CS: 5 1/2″ x 8 1/2″ for die cuts,
4″ x 5 1/4″
Crumb Cake CS: 2 1/2″ x 4′

Die cut the Rolling Waves water dies from the 5 1/2″ x 8 1/2″ Basic White layer – two of the largest wave pieces, one of the starfish and shells and 1 each of the smaller foam wave pieces.
Cut the 6″ x 6″ DSP piece at 4″ and then again at 5 1/4″.
Place the larger die diagonally on the DSP 4″ x 5 1/4″ layer with the foamy tendrils facing upwards and the top left hand edge at the horizon. Angle it downwards to where you can see a lot of the sunset reflections on the water and mark under the die on the DSP two points on either edge. (This will be your cut marks so make sure that the DSP will be long enough to be covered by the die.)
Cut the DSP on the diagonal from the high mark on the left hand edge to the lower mark on the right hand edge.
Adhere the diagonal cut DSP to the Strawberry Slush base card.
Cut a piece of Crumb Cake to fit in the lower portion of the card under the DSP diagonal cut.

Stamp the piece with the sand background stamp and the speckles stamp.

Adhere to the bottom of the card front.

Place the die pieces over the DSP and visually mark where the sunset colors would be reflected on the water and color the dies with Secret Sea on the outside edges and Strawberry Slush and Timid Tiger under the sunset reflections to continue that reflection into the water dies.
Adhere the dies on the diagonal over the sand and DSP.
Blend Strawberry Slush and Timid Tiger with blending brushes over the shells and starfish dies and adhere in the foam and seaspray of the wave dies.
I first adhered the orangy Sunset Sparkle Sequins to the card front and I decided I wanted a more subtle sparkle so I replaced them with the white irridescent sparkle sequins.
Do you agree?
Do you like the colored sequins or the white ones shown at the end?
I stamped the bottom of the 4″ x 5 1/4″ Basic White layer with Crumb Cake sand image and adhered a shell over the sand.

I adhered the 4″ x 3/4″ leftover DSP to the top and stamped the Happy Birthday sentiment from the Rolling Waves stamp set in Strawberry Slush ink to the middle of the layer.

Adhere to the inside of the card base.

I added the White irridescent Sunset Sparkle Sequins to the outside of the card first three and then added two more!

I am very pleased with the final project!
Now it’s your turn to create some artwork of your very own – one stamp at a time.

more color mondays – blueberrybushel, strawberry slush and highland heather

more color mondays – blueberrybushel, strawberry slush and highland heather

Today’s post combines two challenges: More color Mondays color challenge and a sketch challenge!

The Waterside Retreat Suite of products for perfect for this challenge for a sweet and easy summer-y card!

Measurements:
BASE: Blueberry Bushel CS: 5 1/2″ x 8 1/2″,
scraps for dies
Strawberry Slush CS: scraps for dies
Highland Heather CS: scraps for dies
DSP: 3″ x 5 1/2″
Basic White CS: (2) 1/2″ x 5 1/2″, 4″ x 5 1/4″,
scrap for sentiment die

Tear one edge of the 1/2″ x 5 1/2″ strips and adhere to the long sides of the DSP.

Die cut the chairs pieces in each color.

Adhere the two chair pieces together in each color.
Adhere the DSP piece to the middle of the card front.

Adhere the Blueberry Bushel CS chair to the DSP.

Adhere the Highland Heather chair to the right-hand side of the DSP piece on the card front.
Adhere the Strawberry Slush chair in between the two other chairs.
Stamp the Relax sentiment in Basic Black Hybrid Ink and die cut the smaller wide banner from the Stylish Shapes die set.

Pop up the die onto Stampin’ Dimensionals and add to the right-hand side below the highland Heather chair.

Adhere three Blueberry Bushel embellishments from the Strawberries and Dots embellishment kit and your cute summery card is complete!

Try making a card with a repetitive stamp or die as I used from the Card Sketch #126 each of the panels I substituted with the chair dies. You could take those panels and use DSP or colored cardstock or use a repeating stamp… the possibilities are endless!

Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’,
Natalie

watercolor watermelon card

watercolor watermelon card

Today’s card uses Blending brushes to color the Basic White cardstock and then apply splatters of water with Water Painters to achieve a wonderful watercolor background to create a watermelon for my summer card!

Measurements:
BASE: Granny Apple Green CS: 5 1/2″ x 8 1/2″
scored at 4 1/4
Basic White CS: 4″ x 5 1/4″, (2) 3″ x 4″
Basic Black CS: 1 1/2″ x 3 1/2″

Take the first 3″ x 4″ Basic White layer and blend the Granny Apple Green ink onto the CS.

Take the Water Painter and squeeze excess water into the brush, tap the water painter over a bone folder to splatter the surface of the blended cardstock.
Do the same process of blending and water splattering to the second piece of 3″ x 4″ with Strawberry Slush ink.
Emboss the 4″ x 5 1/4″ Basic white CS layer with the Paradise Garden Hybrid embossing folder.

Adhere the embossed layer onto the Granny Apple Green base.

Cut the water splattered layers with consecutive Everyday Arches dies.

Adhere the Strawberry Slush layer onto the Granny Apple Green layer.

Die the Basic Black CS with the six petal die from the Scalloped Blooms. Adhere them to the Strawberry Slush layer as watermelon seeds.

Adhere the watermelon piece to the left-hand side of the embossed layer.

Stamp the sentiment in Strawberry Slush ink onto a sentiment piece from the Scalloped Blooms die set. Add a “seed” to the sentiment piece.

Add three embellishments from the Strawberries and Dots to finish the cards.

What a fun summer card – now it’s your turn to create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

card sketch #121

card sketch #121

Card Sketches sometimes feel like cheating to my Catholic Girl mentality LOL – because they make card making SOOOOOO much easier!

When I look or design a template – suddenly I see all the possibilities! This is such a fun and easy design – the top layer is “cut in half” you can do that as simply as stamping on only half the layer – which is what I did for this card but you could also cut cardstock and do a color block technique with one color on top and another on the bottom. You could have one of the sections be embossed or use DSP – see the possibilities are endless!!!

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, scrap for punch
Strawberry Slush CS: 4″ x 5 1/4″

Using the Extraordinary Flora stamp set and a Hybrid Black ink pad I stamped the lower half of the Strawberry Slush CS.
I lined a ribbon at the top of the stamped image and wrapeed it around the back side of the stamped layer and adhered it with two pieces of Scotch tape.
Turn the layer over and adjust height of ribbon if necessary.
Stamp the sentiment at the top left hand side of the layer.
Adhere a piece of Extraordinary Flora washi tape to a 4″ x 5 1/4″ Basic White layer slowly pressing down flat without wrinkles.
Run through the Stampin’ Cut and Emboss machine with the BASE plate #1, Thin Die Adaptor plate #2 and sandwich the die and washi tape paper in between two Cutting Plates #3.
Take a scrap piece of Basic White cardstock and punch out a rectangle from the NEW Rounded Rectangle Punch #167880.
Stamp the sentiment and lines from the Extraordinary Flora stamp set and hybrid black ink pad onto the punched out piece.

Pick out one of the die cut flowers for an accent on the sentiment piece.

Place Stampin’ Dimensionals on the backside of the sentiment punch and the flower, remove the backing and adhere over the ribbon on the Strawberry Slush layer.
Adhere the Strawberry Slush layer to the Basic White card base.
Place some embellishments on the card – these are flat pearls which are discontinued but you could use any of our pearl embellishments to enhance your version!

Here is a similar version using a different color flower in a slightly different place – such an easy card I could make so many of them in a flash!

Try one of my sketches and go create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

split front berry botanical vellum card

split front berry botanical vellum card

Today’s More Color Mondays card features the newest Product of the Month – Berry Botanical 12″ x 12″ Vellum.

This fun fold card is a split front card.

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, 4 1/4 x 5 3/8″, (2) 1″ x 5 1/4″,
scrap for the sentiment
Vellum: 3″ x 5 3/8″
Strawberry Slush CS: (2) 1″ x 5 3/8″

Cut the card front at 1 1/8″ from the left hand edge of the card – from the score line to the top of the card edge.
Cut the same slit on teh right hand side of the card front.
Place Stampin’ Seal on the inside edge of the two outside panels.
Attach the Vellum to the two panels.
Place the two pieces of Strawberry Slush CS on the inside panels.
Emboss the Basic White CS layer with the NEW Floral Spray 3D embossing folder.
Cut into three pieces (2) 1 1/8″, and 2″ pieces.
Attach the 2″ embossed piece to the center panel of the card front.

Attach the (2) 1 1/8″ on the outside of the card inside.

Color the center embossed flower with the Strawberry Slush ink and a blending brush.
Emboss the (2) 1″ x 5 1/4″ and adhere to the card front outside panels.
Die cut from the Spotlight on Nature dies and Stamp in Strawberry Slush ink a sentiment from the Splash and Relax stamp set and brush the edges of the circle die.

Pop up the sentiment piece and place over the embossed panel on the right hand side of the card front.

Place three In Color Dots on the card to complete this fun multi leveled split front fun fold card!

Now it’s your turn to go and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie