beautiful gallery watercolor gate fold card

beautiful gallery watercolor gate fold card

Happy Friday! I am back in PA after settling my youngest in New England for a summer internship and after spending the day cleaning up dry wall dust that is EVERYWHERE! I took a much needed crafting break and created this gate fold watercolor card! Hope you like it!

Measurements:
BASE: Timid Tiger CS: 5 1/2″ x 8 1/2″
scored at 2 1/8″ in from each end
Fluid 100 paper: (2) 1 1/2″ x 5 1/2″
Basic White CS: scraps for die cuts and
sentiment strip and 4″ x 5 1/4″ inside layer

I used a retired block (sorry I forgot that we had retired the I acrylic block) but you can use any size you have on hand!
I added color to the top third of the block by pressing the ink pad directly onto the acrylic block.

I applied Timid Tiger ink directly onto the middle of the acrylic block (it is ok to overlap a darker ink color but you will contaminate the ink pad if you stamp a lighter ink color over an existing darker color!)
I applied Poppy Parade to the bottom of the acrylic block.
I sprayed the acrylic block with water from a Stampin’ Spritzer and placed the two pieces of Fluid 100 paper together and stamped the block of ink directly onto the middle of the papers. I held the block in place for a few seconds to allow the water and ink color to penetrate the fluid 100 Watercolor paper.
Score the base card 2 1/8″ in from each side of the 8 1/2″ side of the card. Fold inward until the two sides meet in the middle – this is called a gate-fold card.
I added the 4″ x 5 1/4″ Basic White layer to the inside of the card.
I stamped an image from the Gallery Blooms stamp set to the bottom of the Basic White layer for a little added interest!
I adhered the Fluid 100 papers right up to the inside edges of the gate fold.

I die cut two images from the Beautiful Motifs die set in scrap Basic White cardstock and adhered one to each side of the gate fold.

I stamped a thank you sentiment from the Beautiful Motifs stamp set in Timid Tiger to the left hand side of the 1″ x 5 1/2″ Basic White strip and added some flower images from the Gallery Blooms stamp set in Crushed Curry to the right hand side.
I adhered only the left hand side of the sentiment piece so that the card will still open.
I adhered three 2025-2027 In Color Flat Pearls in Timid Tiger to finish off the first version of this card.

I decided to add a little sparkle and depth to the card by adding a splatter technique by tapping the brush tip side of the Poppy Parade Stampin’ Blends over the card front.

I brushed the leaves and petals of the two die cuts with Wink of Stella and the wet brush moves a little of the ink color over the dies as well as added a fine sparkle that is gorgeous but subtle and it does not show well in these photos but trust me it is amazing!
Such a fun card and I am glad to be home and crafting again!

Try this fun fold and some of the techniques I shared and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

tent-fold stepper card

tent-fold stepper card

Today’s blog post is an easy 3D fun fold. It is called a Tent-fold Stepper card featuring the Celebratory Sips suite of products.

Measurements:
BASE: Strawberry Slush CS: 4 1/4″ x 11″
score at 4″, 8″, 9″ and 9 3/4″
DSP: 3 3/4″ x 4″ and 1″ x 3 3/4″
scraps for fussy cutting
Basic White CS: 3 3/4″ x 4″

Score the card base at 4″, 8″, 9″ and 9 3/4″.
Fold the card base at the score lines, valley fold at 4″, valley fold at 8″, valley fold at 9″ and a mountain fold at 9 3/4″.

Stamp the “Cheers” sentiment in Strawberry Slush ink in the center of the Basic White CS.

Adhere to the second panel with the word across the 4 1/4″ side.

Adhere the 1″ x 3 3/4″ DSP strip to the bottom panel.

Adhere the 3 3/4″ x 4″ DSP piece on the outside of the first panel.

Fussy cut some cocktail glasses from the 12″ x 12″ DSP.

Stamp the sentiment Cheers in Strawberry Slush on Basic White CS scrap, fussy cut a diagonal line after the stamped image. Pop up the sentiment piece onto the small panel. Adhere the three cocktail glasses around the sentiment.

Adhere three 2025-2027 In Color Flat Pearls around the sentiment.

This 3D fun fold is an easy card that showcases this fun paper. Try this card with your own stash and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

floral in bloom criss cross card

floral in bloom criss cross card

This criss cross card is an easy fun fold and the Floral in Bloom Suite is the perfect set of products for this fun canvas.

Measurements:
BASE: Strawberry Slush CS: (2) 4 1/4″ x 11″
scraps for dies
DSP: (2) 4″ x 5 1/4″
Basic White CS: 4″ x 5 1/4″
scraps for dies

Score the Strawberry Slush CS at 5 1/2″ and cut from the middle score line top edge to the bottom corner on both pieces.
Cut a 1/4″ off of only one of the stright sides opposite the diagonal cut.
Adhere the two pieces of cardstock together with the piece that is 1/4″ shorter on the inside with the top and bottom and score lines all lined up!
Cut the 2 DSP layers in half diagonally and then paying attention to the direction of the pattern
cut the layers that will match up with the triangles on the outside of the card 1/4″ off both straight sides.
I stamped the inside sentiment in Strawberry Slush ink onto the 4″ x 5 1/4″ Basic White layer make sure it is lower than the criss cross so it is hidden when the card is closed.
I adhered one of the 1/4″ DSP discards below the sentiment.
Adhere the diagional DSP pieces. to the outside of the diagonal criss cross panels of the card.
I die cut the Large Flower from the Pretty Florals dies and the Bloom word die from the Sweet Blooms die set in Strawberry Slush cardstock and die cut the word matte from the Sweet Blooms dies and the inside detail of the flower from the Pretty Florals dies in Basic White.
I adhered the white inside flower detail to the large flower in strawberry slush and adhered it to the outside diagonal card panel so it lined up where the criss cross intersects.
I adhered the white word matte below the flower.
I adhered the Strawberry Slush cardstock word die onto the Basic White matte.
I adhered the 2025-2027 In Color Flat Pearls to the outside of the card to finish it off!
Try this fun and easy fun fold and go create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

everyday you and me corner fold card

everyday you and me corner fold card

Today’s More Color Mondays features the retiring 2023-2025 In Color Wild Wheat, Lost Lagoon and Pretty Peacock.

Everyday You and Me Bundle is on the Last Chance List and Everyday Happiness DSP is beautiful and makes this corner fold card.

Measurements:
BASE: Pretty Peacock CS: 4 1/4″ x 11″
scored at 5 1/2″
DSP: (2) 4″ x 5 1/4″
Basic White CS: 4″ x 5 1/4″
scrap for sentiment piece and flowers/leaves

Mark the top of the 4 1/4″ side of the base at 1 3/4″ and score from the middle score to the mark.
Cut one of the DSP layers from the corner to 1 1/4″ mark on one side.
Adhere the DSP cut piece to the front of the card base.
Turn down the corner and adhere it down.

Cut 1/4″ off the fat end of the small DSP triangle and adhere to the turned down triangle.

Stamp the sentiment in Pretty Peacock ink on a Basic White scrap. Stamp a leaf in Wild Wheat above the sentiment. Stamp the five circle image in Lost Lagoon ink all over the background of the sentiment piece.
Fussy cut the sentiment piece.
Cut another triangle from corner to a 1 3/4″ mark of the second DSP layer.
Adhere to the top of the 4″ x 5 1/4″ Basic White piece.
Stamp two flowers in Pretty Peacock ink and stamp off one flower in a lighter tone.
Stamp one each of the leaves in Wild Wheat ink and die cut all the flowers and leaves.
Arrange the flowers and leaves with dies around the sentiment piece.
Adhere the sentiment over the card front.
Adhere the Sunny Day Dots embellishments to the card front.
I cut a matte for the sentiment piece and then re-adhered the sentiment piece to the card front.

Place a linen thread bow to the bottom right hand-side of the sentiment piece.

This is a fun and easy way to make a standard card with a little interest – a corner turned down. Try this technique and create some artwork of your very own one stamp at a time!

Happy Stampin’
Natalie

more color mondays – secret sea, boho blue and cloud cover

more color mondays – secret sea, boho blue and cloud cover

Today’s More Color Mondays color challenge is all about something old and something new – all in hues of blue! The 2023-2025 In Colors are making their last appearance and taking their final bows and going quickly as of writing this yesterday the Boho Blue ink, cardstock and refills, Pebbled Path cardstock and refill and Wild Wheat cardstock and refill are all SOLD OUT the rest are availabel while supplies last!

I am combining them with two debuting colors from the 2025-2027 In Colors collection: Secret Sea and Cloud Cover!

Also debuting on May 6 is a gorgeous new suite called Beautiful Gallery. The 6″ x 6″ Designer Series Paper steals the show with art gallery inspired painted and sketched designs.

Measurements:
BASE: Secret Sea CS: 5 1/2″ x 8 1/2″
scored at 2 1/8″ and 4 1/2″
Boho Blue CS: (2) 4 1/8″ x 5 3/8″
scrap for sentiment banner matte
Cloud Cover CS: 4″ x 5 1/4″
Basic White CS: 2″ x 5 1/5″ and
scrap for the sentiment piece
DSP: 6″ x 6″

I embossed the Cloud Cover layer in the beautiful new Damask Designs embossing folder and adhered it to one of the Boho Blue layers.
Base your cuts of the 6″ x 6″ DSP on the composition of the painting. You want to cut 3/4″ off of one end to make it 6″ x 5 1/4″ and then cut it into 2 pieces 2″ and 4″ basing the 4″ piece as the front of your finished card.

I cut the 2″ piece down to 1 1/4″ x 5″ as I wanted a little embossed layer border the entire way around the DSP layer.

Adhere the 2″ x 5″ DSP piece on the right-hand side of the embossed layer.

I used a 2″ x 4″ scrap piece of Basic White CS for the left-hand side of the embossed layer and stamped a sentiment from the Beautiful Motifs stamp set in Secret Sea ink – this is a beautiful deep misty navy quite different from our Night of Navy. I adhered it to the side of the DSP.
Adhere this embossed layer to the inside of the z-fold card.
Take the top portion of the 6″ x 6″ DSP piece that you initially cut off and cut it down to 3/4″ x 5 1/4″ and adhere to the 2″ x 5 1/4″ piece of Basic White CS to the middle. Adhere this piece to the middle layer of the z-fold card.
Take the 4″ x 5 1/4″ piece of DSP and adhere it to the second layer of Boho Blue CS then place adhesive on the front panel of the z-fold and attach this layer so that the top, left-hand side and bottom are equally aligned to the front z-fold panel.
Using the back side of this DSP scrap stamp a “just a note” sentiment onto the scrap in Secret Sea ink and cut a banner edge on the right-hand edge. Adhere to a scrap piece of Boho Blue CS and cut a banner edge on the right-hand side to match the DSP banner edge.
Pop up the sentiment piece onto Stampin’ DImensionals and place in the upper left-hand corner of the card front or elsewhere depending on the DSP composition you choose.
I added five new In Color embellishments in Cloud Cover and Secret sea to the card front there are also embellishments which are part of this Beautiful Gallery suite called Pressed Flower motifs and they would have gone nicely with this project as well. All of this will be available to customers in early May! Love it and want to have it now? Join my team and you are able to order it in the pre-order period!

I love the way that extended Z-fold fun fold cards look like a normal card but surprise you when they are opened!

Try this easy fun fold and go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Reminder this post is going live prior to the new In Colors being available so the sneak peak items will not be in the order icons below – these are only available currently to current demonstrators to order in a pre-order but will be available once the 2025-2026 Annual Catalog goes live May 6th,2025!