more color mondays – pretty peacock, granny apple green and misty moonlight sneak peak

more color mondays – pretty peacock, granny apple green and misty moonlight sneak peak

Today’s More Color Mondays color challenge features the new $5 Product of the Month called Painted Illusions! (look at the artistic designs below) This paper is gorgeous and I selected the colors based on the DSP!

This is a super simple, fun fold that is fun to make called the Split Front card.

Measurements:
BASE: Pretty Peacock CS: 4 1/4″ x 11″
scored at 5 1/2, cut at 1 1/2″ then again at
2 1/2″
DSP: 4″ x 5 1/4″
Basic White CS: (2) 4″ x 5 1/4″

Cut 1 1/2″ off the bottom of the card front.

Then cut another 2 1/2″ off the same side.

You will end up with 1 1/2″ on the top of the card front below the score line and two cut pieces.

Cut 1 1/4″ off each side of the DSP.
Attach the Top piece of the design to the cardstock still attached to the card front.
Adhere the bottom 1 1/4″ piece to the first piece cut off the card.
I cut 1/4″ piece off the middle piece of DSP and added that to the bottom of the inside Basic White 4″ x 5 1/4″ layer.

Then I adhered the middle piece of of DSP to the second piece cut off the card front.

Place the bottom matted piece aligned to the bottom of the card base and twist the middle piece and add Stampin’ Seal or Tear & Tape to only the top and the bottom and attach the middle piece vertically between the top and bottom matted pieces.
I took the second piece of Basic White layer and cut three dies from the upcoming March Online Exclusive bundle Springtime Scenes! This is a SNEAK PEAK and will not be available for a couple more weeks therefore it will not be listed below in the photo click-ables at the end.
Using Granny Apple Green and Pretty Peacock ink and blending brushes I colored the dies and stamped the sentiment from this upcoming set in Pretty Peacock ink.
I adhered the left side only of the die cut circle and placed it on the middle DSP piece hanging over the open edge.

I popped up the leaf and adhered the sentiment piece under it careful to not adhere the part that would hang over the open edge on the left.

I added three Sparkle Dot Essentials in the green color to add some bling and this simple card is complete!

Try this simple fun fold today and go create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – petunia pop, daffodil delight and strawberry slush

more color mondays – petunia pop, daffodil delight and strawberry slush

Today’s More Color Mondays color challenge features the suite that debuts tomorrow on January 6th all of the great new projects become available in our new January to April 2026 mini catalog!

This sweet and whimsical fun fold card starts like a normally 4 1/4″ x 11″ card scored at 5 1/2″ but cut a little off one side and it allows you to see the inside of the card at a glance!

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″ cut 1 1/2″ off one side
DSP: 3″ x 4″ and 1 1/2″ x 4″
Strawberry Slush CS: 1/4″ x 4 1/4″
Petunia Pop CS: 1/4″ x 4 1/4″
Daffodil Delight CS: 1/8″ x 4 1/4″

Cut 1 1/2″ off the left hand side of the 11″ length. Save that piece and cut for the sentiment piece.
Cut the DSP at 3″ x 4″ and 1 1/2″ x 4″ – adhere the 3″ piece to the upper flap, leaving an even 1/8″ border on the top and sides.
Adhere the 1 1/2″ piece to the inside bottom of the card leaving a 1/8″ border on the bottom and sides.
Adhere the Colored cardstock strips below the 3″ DSP piece so that they cover the white section completely.
Adhere the Daffodil Delight strip and stamp the sentiment in Petunia Pop Ink and blend with a blending brush and Daffodil Delight ink over the sentiment. Pop up the sentiment on the right-hand side of the strips.
The Beach Boardwalk Suite comes with these fun Puffy Stickers so I decided to add a few for the coordinating embellishments around the sentiment – a yellow sun and two dots.
This finishes the card with more whimsy and color and hopefully will bring some sunshine to someone’s day!

Now it’s your turn and go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Reminder the Boardwalk Fun and Beach Boardwalk items are SNEAK PEAK until tomorrow and therefore will not be in the photo links below as they are not available just yet – but only 24 MORE HOURS TO GO!

winter meadow easel card

winter meadow easel card

Well, I don’t usually highlight retired products and i pulled the Winter Meadow DSP out and started designing this card and totally forgot it is retired. OOPS! but the card is so pretty I had to show you the finished result!

It is still a good teaching moment – I will teach you how to make an easel 3D fun fold card and you can try it with your stash of DSP – retired or current!

Measurements:
BASE: Basic Grey CS: 5 1/2″ x 8 1/2″
scored at 1 1/4″ and 3″
Secret Sea CS: 4″ x 5 1/4″, 3/4″x 5 1/4″
Basic White CS: 4″ x 5 1/4″, scrap for the die
DSP: 3 3/4″ x 5″, 1/2″ x 5″

Adhere the 1/2″ x 5″ DSP piece to the Secret Sea matte 3/4″ x 5 1/4″, then adhere Foam Adhesive strips to the back.
Adhere the large DSP layer to the 4″ x 5 1/4″ Secret Sea matte.
Score the card base at 1 1/4″ and 3″ on the long side.

Adhere the 4″ x 5 1/4″ Basic White layer to the inside of the card and then pop up the small DSP matte to the bottom of the Basic White layer.

Place adhesive on the outside edge of the small panel.
Die cut the small sentiment piece from the Snowflake Kisses bundle and stamp “let it snow” in Secret Sea ink. Pop it up on the DSP.

Adhere the large DSP matte to the front panel.

Adhere three Secret Sea 2025-2027 In Color Flat Pearls to the outside of the easel around the sentiment.
The front panel tucks into the raised smaller DSP piece to stand up for an easel effect hence the fun fold name!
This is a side view of the card!
Have a pretty piece of DSP or artwork that you would like to display then try this easel card fun fold and do just that!

Now go and create some artwork of your very own that you would like to display – one stamp at a time!

Happy Stampin’
Natalie

seasons of elegance pleated card

seasons of elegance pleated card

This pleated card looks so impressive and is so easy it’s all about the folding and adhering – easy peasy! Let me show you how to make this show stopper Christmas card!

Measurements:
BASE: Cherry Cobbler CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 4″ x 9 3/4″ scored at 1/4″, 1/2″, 1 1/4″,
1 1/2″, 2 1/4″, 2 1/2″, 3 1/4″, 3 1/2″, 4 1/4″,
4 1/2″, 5 1/4″, 5 1/2″, 6 1/4″, 6 1/2″, 7 1/4″,
7 1/2″, 8 1/4″, 8 1/2″, 9 1/4″ and 9 1/2″
DSP: in a complimentary color: 1″ x 5 1/2″
Basic White CS: 4″ x 5 1/4″ for inside

Cut the DSP to 4″ x 9 3/4″
Then score at 1/4″, 1/2″, 1 1/4″,
1 1/2″, 2 1/4″, 2 1/2″, 3 1/4″, 3 1/2″, 4 1/4″,
4 1/2″, 5 1/4″, 5 1/2″, 6 1/4″, 6 1/2″, 7 1/4″,
7 1/2″, 8 1/4″, 8 1/2″, 9 1/4″ and 9 1/2″

Start with three mountain folds and then 2 valley, then continue with 2 mountain and 2 valleys until the end and you will have 3 mountain folds for the last three folds.

I modified the original design I found online and added a 1/4″ fold on both ends so you would have a fold back portion to secure the pleats to the card base.
This next step is the hardest and it’s really about dexterity LOL – you need to fold the pleats inward and hold them at their closest while adhering Tear-n-Tape to the back side.

This will curl – do not be alarmed that is natural because of the pleating.

Once you remove the release paper from the Tear-n-Tape and attach the pleated paper to the Card base this will eliminate the curling.

Remove the release paper from both Tear-n-Tape strips and adhere to the card base.

I heat embossed the sentiment from the Jolly Holly stamp set in Gold embossing powder with a Heat Tool and adhered the DSP embossed strip to the two end pleats.

Cut away any excess – I made that 5 1/2″ long because the pleated size will vary so you will have excess.

I added the gold colored sequins from the Traditional Sparkling Sequins -these are my new favorite holiday embellishment – you can use them as is or you can color the lighter ones with Stampin’ Blends markers – they are so sparkly and versatile!

This easy WOW card is a fabulous design – try it today with your stash of DSP and let me know how it turns out!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

card in card peace on earth fun fold

card in card peace on earth fun fold

Not to make anyone panic or anything but did you realize that Christmas Day is ONLY 54 days away!
Today is the last day of our join special and many of you have taken advantage of the SUPER deal for Christmas presents for your children or grandchildren for $35 you can get up to 8 kits depending upon the cost of the ones you order! 8 gifts for $35 – that’s crazy!
If you need assistance or have any questions about this special let me know because it ends today!

Today’s card starts my Christmas card samples and this one is a WOW card that can be easily made no matter is you are a seasoned crafter or just a beginner. Follow along with my post and learn how to make this special card in card fun fold with the Peaceful Garden Suite Collection of products.

Measurements:
BASE 1: Cloud Cover CS: 5 1/2″ x 8 1/2″
scored at 1 1/16″, 2 1/8″, 6 3/8″ and 7 7/16″
BASE 2: Basic White CS: 4″ x 11″
scored at 5 1/2″, scrap for 2 dove die cuts
DSP: (4) 1 7/8″ x 5 3/8″
Glimmer paper: scraps for 2 dove die cuts
scraps for 2 stars

Score the two bases.

Run the front of the Basic White CS base through the Stampin’ Cut and Emboss machine in the Peaceful Garden 3D embossing folder using the BASE #1 plate and the embossing #4 plate.
Stamp the Peace on Earth sentiment in Smoky Slate ink in the center of the embossed greenery.

Adhere to the center panel of the Cloud Cover base.

Die cut the stars out of the Secret Sea toned Glimmer Paper and adhere around the Peace on Earth sentiment.
Adhere the DSP to the 4 small panels on the same side as you adhered the Basic White inside card.
Using a blending brush on the inside of the Basic White card brush small circles on the upper right corner and the lower left corner and adhere two white dove die cuts over the Cloud Cover ink spots on the inside of the card.
Die cut each dove out of the silver Glimmer paper and adhere to the outside panels with Stampin’ Dimensionals.
Adhere some Basic Rhinestone Jewels around the sentiment and this Wow card is complete!

Try this card in card fun fold soon and send it off to someone special – now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie