more color mondays – real red, old olive and pool party – swing door fun fold

more color mondays – real red, old olive and pool party – swing door fun fold

Easy Christmas cards that look elegant are the best – don’t you think? I make a lot of Christmas cards to send out to people and I want them to look beautiful but be able to put many together in the shortest amount of time.

That being said – if you send out Christmas cards NOW is the time to start designing and ordering your supplies so you are not rushed to make and send them on time!

This fun fold attaches the DSP to a shorter piece of cardstock so it swings open and you can see both sides of the cardstock! I saw this card from a number of demonstrators and there was no name for it so I am naming mine a swing door fun fold card because that is what it reminds me of!

Measurements:
BASE: Old Olive CS: 5 1/2″ x 6″
scored at 4 1/4″, 1″ x 5 1/2″ or 5 1/4″, scraps
Basic White CS: 4″ x 5 1/4″
DSP: 3″ x 5 1/2″
Pool Party CS: scrap for die circle

Score the base at 4 1/4″ – place the shorter panel on the right-hand side. Adhere the Basic White layer on the inside of the card.
Cut the Traditions of Christmas DSP to 3″ x 12″ then cut to 5 1/2″ there will be a 1″ x 3″ left over from cutting two 5 1/2″ pieces. Adhere that to the top left-hand corner of the Basic White layer.
Turn the Dsp to the side you want on the inside and place a thin bead of glue down the right-hand side edge. Flip it over and glue to the left-hand edge of the small panel. Match up the right-hand top and bottom corners with the top and bottom edges of the back of the card.
Emboss the 1″ piece and attach to the front Old Olive panel. You choose if you want it to be the full length as shown here or 5 1/4″ length with a border as the final card shows.
Die cut a small circle from the Stylish Shapes die set.

Stamp the Have a Happy on a Old Olive 1/4″ strip and banner punch this (this is an upcoming Online Exclusive punch that is in the Banner Sayings bundle! – stay tuned to see it November 1st!)

Stamp the Christmas from Holly Jolly Stamp set in Old Olive ink on Old Olive cardstock.

Adhere the Christmas layer on the Pool Party circle and adhere the banner diagonally above the Christmas layer on the Pool Party circle.

Add Stampin’ Dimensionals on the back of all the components of the sentiment focal point.
Attach to the card in the center.

Add some gold embellishments to the card to enhance the gold foil and you have a lovely easily reproduced Christmas card!

Are you going to send some of your people a special handmade Christmas card this year? I am available to help you design and order your supplies if you need assistance – just call or text me!

Now go and design and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – pretty peacock, crumb cake and gorgeous grape

more color mondays – pretty peacock, crumb cake and gorgeous grape

Today’s More Color Mondays color challenge features some of the soft colors from the Perennial Lavender Designer Series Paper – Pretty Peacock, Crumb Cake and Gorgeous Grape and a freestanding fun fold card!

Measurements:
Gorgeous Grape CS: 4 1/4″ x 5 1/2″,
4 1/4″ x 11 scored at 2″, 3 3/4″, 7 1/4″, and 9″
Crumb Cake CS: 4 1/8″ x 5 3/8″,
(2) 1 7/8″ x 4 1/8″, (2) 1 5/8″ x 5 3/8″
DSP: (2) 1 1/2″ x 4 “, (2) 1 3/4″ x 4″,
(2) 1 14/” x 4″
Basic White CS: 3 3/4″ x 4″

Adhere the DSP pieces to the Crumb Cake mattes – the 1 3/4″ DSP to the 1 7/8″ matte, and the 1 1/2″ DSP to the 1 5/8″ matte.

Score the 4 1/4″ x 11″ Gorgeous Grape CS at 2″, 3 3/4″, 7 1/4″ and 9″
Adhere the 4 1/8″ Crumb Cake CS layer to the Gorgeous Grape 4 1/4″ layer.
Adhere the two small pieces of DSP on the edges of the Crumb Cake layer leaving an even border.
Adhere the 4 1/4″ x 11″ scored layer onto the center of the card base.
Die cut a Gorgeous Grape scrap with the Spotlight on Nature die set.
Die cut a Basic White scrap with the Stylish Shape and stamp the butterfly and the thanks of Gorgeous Grape ink.
Die cut the large banner from the Stylish Shapes die set and cut it in half.
Stamp the 3 1/4″ Basic White layer and stamp images in the three More Color Mondays color challenge colors.
Adhere the banner die on either side of the circle dies and adhere to the front flap of the card!
This free standing fun fold card is so fun and perfect for displaying beautiful Designer Series Paper!

Try this fun fold with your own supplies and go create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

triadic color theory charming day fun fold card

triadic color theory charming day fun fold card

All this month we explored color theory in my posts and in my classes – this is a triadic color combination taking inspiration from our new Online Exclusive suite Floral Charm and our awesome Color Coach!

This easy Book Bind fun fold uses three colors that are positioned in a triangular pattern on the Color Wheel – Night of Navy, Timid Tiger and Mossy Meadow.

Measurements:
BASE: Night of Navy CS: 4 1/4″ x 11″
scored at 5 1/2 and 6 3/4″
scraps for leaf dies
Basic White CS: (2) 4″ squares (1) 3″ x 4″
Floral Charm DSP: 1″ x 4″

Place glue in between the two score lines and adhere the panels together to make a book bind fun fold.
Adhere the 1″ x 4″ DSP strip to the outside left-hand panel.
Stamp the “Hey” sentiment from the Charming Day stamp set in Night of Navy ink on the upper left-hand corner of one of the 4″ square layers add an ellipsis (those three dots after a word that is used to indicate a pause) with the Night of Navy Stampin’ Write marker.
Place this Basic White 4″ square in the Distressed Tile 3D embossing folder and emboss that layer.
Adhere to the right-hand panel of the card front.
I stamped the branch and the inside sentiment from the Charming Day stamp set in Night of Navy ink on the other 4″ square layer and adhere to the inside of the card.
Stamp the floral image from the stamp set in Tuxedo Black Memento ink on the 3″ x 4″ Basic White layer.

Using the Blender Pen, color the flower with Timid Tiger ink and the leaves with the Mossy Meadow ink. Die cut the flower, and pop it up on Stampin’ Dimensionals in the opposite corner as the “Hey” sentiment.

Cut the longer leaf die cut in half and tuck all three foliage pieces under the popped up floral image.

Adhere the Navy Opal Rounds Assortment embellishments for a perfectly coordinated finishing touch! I love triadic color combinations the colors are very balanced and pleasing.
Search the color coach page in our current catalog if you do not have one it is a worthwhile investment! Choose a triadic color combination and create some artwork of your very own – one stamp, one color at a time!

Happy Stampin’
Natalie

more color mondays – pumpkin pie, petal pink and balmy blue

more color mondays – pumpkin pie, petal pink and balmy blue

Today’s More Color Mondays color challenge takes it’s cue from the gorgeous Everyday Skies 6″ x 6″ DSP. The sheet on the front of this card is covered in fluffy clouds of Petal pink and light Pumpkin Pie set against a Balmy Blue sky. A perfect summer sky for a summery fun fold card! This card is called a Pop Out Swing Fun Fold and i will show you how easy it is to make!
Follow along and make one of your own!

Measurements:
BASE 1: Balmy Blue CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
BASE 2: Balmy Blue CS: 5 1/2″ x 8″
scored at 2″, 4″ and 6″
DSP: BASE 1 outside layer: 4″ x 5 1/4″
BASE 2 inside layers: (3) 1 3/4″ x 5 1/4″
Basic White CS: 1 3/4″ x 5 1/4″
Pumpkin Pie CS: scraps for butterfly dies
Petal Pink CS: scraps for butterfly dies

Score BASE 1 at 4 1/4″ and BASE 2 at 2″, 4″, and 6″.

Adhere the 4″ x 5 1/4″ Everyday Skies DSP layer to the Balmy Blue BASE 1 card front.

Flip BASE 1 over and adhere one of the Beautiful Bokeh DSP strips to the left-hand edge of the backside.
Die cut the large base butterfly image from the Beautiful Butterflies bundle out of the card front – cutting through both layers on the front and the DSP on the back side.
On BASE 2, place the 5 1/2″ side of the paper at the top edge of the Stampin’ Trimmer, cut at 3/4″ down to the 2″ score line on each side of the paper. Then cut along the 2″ score line in between the cut lines. This will leave two tabs on the top and bottom of this BASE piece.
Adhere the other two 1 3/4″ x 5 1/4″ Beautiful Bokeh DSP pieces to the second and thrid panels of BASE 2.
Stamp and decorate the Basic White 1 3/4″ layer and adhere to the last panel of BASE 2.
Place Multipurpose liquid glue to the back side of panel 4 and adhere to the right-hand edge of BASE 1 making sure that the outside edges align.
Fold in between panels 2 and 3 and apply liquid glue to the tabs.

Clos ethe card front over the tabs and adhere to the back of the BASE 1 card front. If you lie the BASE 2 flat and bring the BASE 1 card front over it this will ensure that the card will close well after adhering.

With the card closed, apply liquid glue to the inside right panel, the part that is visible through the butterfly die cut out space.
Die cut the butterfly base in Pumpkin Pie CS.
Die cut the butterfly detail die in Petal Pink CS.
Adhere the detailed die to the base with Liquid Glue.
Adhere the completed butterfly die to the right-hand edge that has glue on it – laying the butterfly into the original die negative space.
Once dry this will allow the butterfly to “swing” as the mechanism opens and closes with the card!
I added two smaller butterflies to the inside of the card and Holographic Resin Dots to the outside of the card to finish it off with a llittle sparkle!

You can cut out the front of the card wish any shape! Try a die that you have on hand and see what artwork you can create – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – azure afternoon, coastal cabana and gorgeous grape

more color mondays – azure afternoon, coastal cabana and gorgeous grape

Sometimes with a special birthday you just need to go the extra mile and create a really special card – today son #2 turns 30 (first of all how can I have two children over 30 – CRAZY!!)

I still am designing cards from the color coach this is an analogous color combination – meaning these three colors are adjacent to one another on the color wheel and work well together.

I am so in love with this card – I saw a similar card from a demonstrator in Australia so I copied the design with different colors and modified a few other things but a special thank you to Julianne R for the inspiration!

Measurements:
BASE 1: Azure Afternoon 5 1/2″ x 11” (14cm x 28cm) scored at 2-¾” & 5-½” (7cm & 14cm) along long edge
BASE 2: Azure Afternoon 2” x 11” (5.1cm x 28cm) scored at 2-¾” & 5-½” (7cm & 14cm) along long edge
Bracket: 1-¾” x 3-3/4 “ (4.4cm x 9.5cm) scored at ½” (1.3cm) in from both ends
DSP Layer: 5-1/8” (13cm) square
DSP Layers: 2-3/8” x 5-1/8” (6cm x 13cm) (cut 2)
Azure Afternoon Base 2 bottom layers:
1-⅝ x 5-⅛” (4.1cm x 13cm) AND 1-⅝ x 2-3/8”
(4.1cm x 6cm) (cut 2)
Basic White CS:
Base 2 Layers: 1-3/4” x 2-1/2” (4.4cm x 6.4cm) (cut 2)
Base 2 Layer: 1-¾” x 5-¼” (4.4cm x 13.3cm)
DSP Matte layers:
2-1/2” x 5-¼” (6.4cm x 13.3cm) (cut 2)
5-1/4” (13.3cm) square
scraps for stamping and die cutting 3 boats

This is a bunch of cutting but it is a WOW Card for sure!

Score the 5 1/2″ x 11″ BASE 1 at 2 3/4″ and 5 1/2″.

Fold into a Z fold.

Adhere the 5 1/8″ DSP square layer onto the 5 1/4″ Basic White square layer and then adhere these to the third panel which will be the back inside panel.

Cut another DSP sheet to 5 1/8″ long and then cut two consecutive 2 3/8″ cuts so the images match together when adhered.

Adhere the DSP pieces to the 2 1/2″ x 5 1/4″ layers of Basic white CS. Adhere these pieces to the first and second panel in order so that the images flow into one another.

Take BASE 2 and fold it in half – run it through the Stampin’ Cut and Emboss machine with the wave edgelit from the Sunrise Sailing die set. The edgelit will cut through both layers at once.
Cut the Basic White layers and the Azure Afternoon layers with the different edgelits.

I used the same edgelit on all Azure Afternoon pieces as the BASE 2 and the different edgelit for the Basic White CS pieces.

Take the three Azure Afternoon layers and emboss them in the bottom part of the Sunrise Sailing hybrid embossing folder.
Position the long side of BASE 2 on the left.

Adhere the Basic White pieces onto BASE 2 leaving an even top border showing.

Adhere the embossed Azure Afternoon pieces over the Basic White layers leaving an even top border showing.
Fold the BASE 2 z fold and lay the long side of the BASE 2 onto the first panel of BASE 1.

Adhere only the portion of BASE 2 that touches the first panel.

Adhere the back of the third panel of BASE 2 and close the card making sure that the card is laying flat and adhere the BASE 2 Z fold to the BASE 1 Z fold.

Place Multi-Purpose Liquid Glue onto both small scored edges of the bracket.

Place in between the small box created by the joining of BASE 1 and BASE 2.

Place it towards the top of the BASE 2 edge just below the edge so you cannot see it but when the boat is attached it is high enough to be seen.

Stamp three boats from the Sunrise Sailing stamp set in Tuxedo Black Memento ink.

Stamp each boat with the boat fill in stamp and sail stripes in the analogous colors for this color challenge: Azure Afternoon, Coastal Cabana and Gorgeous Grape inks.

Die cut the boats out.

Run the boats through the embossing folder to give them a little embossed definition.
I used the Take Your Pick Tool attachment cutting knife to cut out the center piece between the two sails.
Take the first boat and adhere Stampin’ Dimensionals to the left-hand side of the boat and stick onto the first panel edge at the water-wave line.
Adhere the second boat onto the bracket so that the boat sticks up and looks like it is floating on the waves.
Adhere the last boat onto the last DSP panel at the water-wave line.
I added the Holographic Resin Dots from the Celebratory Sips Suite of Online Exclusive products for some fun clear shimmery embellishments like reflections on the water!

I stamped “You’re Destined for Great Things” on the first panel in Tuxedo Black Memento Ink and Happy Birthday from a retired set for the inside panel.

This advanced stamping project is so worth the extra time for a special WOW card for a special someone!

Happy Birthday to my baby boy #2 you deserve all the world can give – hope you like the card because I loved making it for you!

Try making a special project for someone special to you today! Now go create something spectacular – one stamp at a time!

Happy Stampin’
Natalie