peace on earth christmas card – upcoming mini catalog sneakpeak

peace on earth christmas card – upcoming mini catalog sneakpeak

Starting in September comes a new holiday mini catalog – the September to December 2025 Mini Catalog! I will have copies available at my Open House – Friday, August 22nd 12pm – 3pm and Saturday, August 23rd 9am to 12pm!

This is one of the products we could pre-order and this one was featured in a demonstrator exclusive craft day a few weeks back!

This is a card I designed for the Christmas in July Demonstrator Swap! It features the Peace on Earth bundle along with the Peaceful Greenery 3D embossing folder and a fun technique.

Measurements:
BASE: Secret Sea CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Misty Moonlight CS: 4″ x 5 1/4″
Peaceful Garden Glimmer Paper: 2″ x 3″
Basic White CS: 4″ x 5 1/4″

Place the Misty Moonlight layer in the Peaceful Greenery 3D embossing folder and run through the Stampin’ Cut and Emboss machine using the Base plate #1 and the grey embossing plate #4 with the embossing folder sandwiched in between #1 and #4.
Using a direct to paper technique rub Versamark ink onto the edges of the embossed layer.
Using the brush that comes in the Embossing Additions Tool Kit (#159971) $27.00 dip the brush into the Silver embossing powder and then tap the powder from the brush onto the versamark ink covered paper. Heat with the Heat Tool until the embossing powder melts.

(Product Details for the Embossing Additions Tool Kit: Make embossing easier with the Embossing Additions Tool Kit. This kit includes an Embossing Buddy, Powder Pal, Crafting Tweezers, and Crafting Brush. The Embossing Buddy is a small bag of powder. Rub it over your paper before inking and embossing. This ensures the embossing powder stays only where you want it. The Powder Pal is an easy way to catch and funnel excess embossing powder back into its container. Use the Crafting Tweezers to hold items while embossing them. And the Crafting Brush is handy for brushing powder for keeping your paper and work area clean. Keep this kit on hand, and you’ll what you need to keep your embossing neat and tidy.

* Embossing Buddy
* Powder Pal
* Crafting Tweezers
* Crafting Brush)

Stamp the Peace on Earth sentiment in Secret Sea ink in the middle of the embossing folder outlined middle area.
Adhere the embossed layer to the Secret Sea cardstock card base.
Die cut the smaller dove image out of the silver hue Peaceful Garden glimmer paper and two of the stars.

Place it on the card front to see where you would like to adhere the dove.

Adhere the two stars to the right and slightly below the sentiment.
Place Stampin’ Seal + below where the dove will be adhered and fold a 5″ piece of Misty Moonlight and Silver edged ribbon that is part of the Peaceful Garden Suite of products, adhere the ribbon down and then remove the release paper from some Stampin’ Dimensionals on the back of the dove and adhere over the ribbon.
Adhere some Basic Rhinestone Jewels to the card front.
Stamp wishing you and Peace, Love and Joy in Secret Sea ink to the Basic White layer and adhere to the inside of the card.
The embossing powder dusting gives the edges of the card an antiqued look and enhances the Glimmer paper dove and stars for a gorgeous Christmas card!

This is a lovely set that can be used for so much more than just Christmas! Let me know if you would like a catalog and will not be at my Open House or upcoming Library Card classes and I will get one to you!

Now go and create some artwork of your very own – one stamp at a time!
As a reminder since this is a sneak peak and the products are not available until September 3rd for customers the photo links will not be available below.

Happy Stampin’
Natalie

more color mondays – night of navy, misty moonlight and calypso coral

more color mondays – night of navy, misty moonlight and calypso coral

This year Stampin’ Up! added a new line of cardstock called Two-toned cardstock.

This cardstock is printed color, because the color is printed on the surface of the paper it leaves the core of the paper white! This opens up a world of possibilities for tearing and sanding!

Today’s More Color Monday color challenge card uses this new cardstock with embossing and sanding and features a rich color combination of Night of Navy, Misty Moonlight and Calypso Coral.

Measurements:
BASE: Night of Navy CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Misty Moonlight CS: (2) 1/2″ x 5 1/4″ and a scrap
strip for the sentiment piece
Calypso Coral Two Toned cardstock:
3″ x 5 1/4″

I started with a different sentiment for this card but liked it so much that I decided to make this a birthday card for my best friend and soul mate, his birthday is today so if you see Kevin wish him a great one!

Take the two-toned cardstock and emboss with the Sunflower 3D embossing folder.
Take a sanding block or a nail file and gently rub over the embossed surface rubbing away a layer of cardstock to reveal the white core in elevated areas of the embossed design.

Emboss the 2 Misty Moonlight strips with the Mini Corrugated 3D embossing folder so that the corrugated lines are perpendicular to the long side of the strip. This will make the strips appear more like a ruffled effect when added to the card front.

Adhere the Misty Moonlight embossed strips to the top and bottom edges of the Sunflower embossed Two-toned cardstock.

Distress the edges of the Misty Moonlight Corrugated embossed edges.

Adhere the embossed images to the center of the card front.

Stamp the sentiment onto the strip scrap and fussy cut a banner edge to the right hand side
and adhere on top of the sunflower embossed area.

I added Navy Charming Shimmer Faceted Dots for a finished coordinated sparkle!

This new paper delivers a punch with the white core! It is now available in all the Stampin’ Up! Core and In Color Collections! Try some soon and see what all the excitement is about!

Now go and create some fun artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

sunflower embossing on designer series paper

sunflower embossing on designer series paper

I have had so much fun playing with the new Online Exclusive 3D Sunflower embossing folder – and today’s blog post is no exception!

Have you ever inked up an embossing folder?
Have you ever embossed Designer Series Paper? Have you ever combined these techniques?

Today that is exactly what we are experimenting with!

Measurements:
BASE: Petal Pink CS: 4 1/4″ x 11″
scored at 5 1/2″
Basic White CS: 4″ x 5 1/4″
Everyday Skies DSP: 6″ x 6″ cut to 4″ x 5 1/4″
and save the 2″ x 5 1/4″
Balmy Blue CS: scrap for the sentiment die

This Everyday Skies DSP does not look like flowers necessarily but the background is subtle and perfect for this technique!

Using a brayer and Memento Tuxedo Black ink,
Ink the side with the Stampin’ Up! logo.
Place the 6″ x 6″ DSP in the folder with the side you wish to use face up towards the inked side of the folder.
Close the folder overe the DSP and run through the Stampin’ Cut and Emboss machine.
Cut the 6″ x 6″ DSP to 5 1/4″ and then cut at 4″.

Adhere the 2″ x 5 1/4″ piece onto the Basic White layer on the right-hand side of the layer leaving a 1/8″ border on the right.

Adhere the Basic White layer to the inside of the card base.

Adhere the 4″ x 5 1/4″ DSP piece to the card front leaving an even border the entire way around!
Stamp the sentiment from Mixed labels bundle on Balmy Blue CS with Tuxedo Black memento ink and die cut with the Mixed Labels die set.

Pop up the sentiment die onto Stampin’ Dimensionals and adhere to the card front over the DSP.

I added three Neutral Matte Dots in Basic Black to finish off the card. Can you beleive that is Everyday Skies DSP coloring those Sunflowers?

Here is the same technique with a different pattern of Everyday Skies DSP – amazing how different just changing the pattern of the paper changes the entire look of the card!
I used some of my retired stash of DSP from the Lily Pond Lane DSP and these are the cards that resulted from two different patterns from that Designer Series Paper.
Try inking up one of the 3D embossing folders in your collection and see what combinations you can make!

Now go and create some art work of your very own with your folders and stamps – one stamp at a time!

Happy Stampin’
Natalie

more color mondays  – daffodil delight, coastal cabana and flirty flamingo

more color mondays – daffodil delight, coastal cabana and flirty flamingo

It’s Monday and that means another color challenge. Today’s challenge features Daffodil Delight, Coastal Cabana and Flirty Flamingo!

I am using a Faux Layering technique and embossing for this simple and stunning card!

Measurements:
BASE: Coastal Cabana CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″ and scrap for
sentiment piece.

Tear post it notes or masking paper and layer on the top and bottom of the 4″ x 5 1/4″ Basic White piece. Leave about 1 1/2″ – 2″ gap in between the post it notes.

Using a Blending Brush, layer Coastal Cabana on the bottom third of the opening.

Using a second blending brush add a layer of Daffodil Delight ink above the Coastal Cabana overlapping the colors slightly!
Using a third blending brush layer Flirty Flamingo across the top of the opening and overlap with the Daffodil Delight slightly – this creates a gradient look and new colors in the mix!
Stamp one of the images from the Online Exclusive Prairie Grass stamp set in Tuxedo Black Memento ink across the Post-It notes three to four times across the paper.
Remove the Post-It notes.
Place the Basic White colored layer in the Eyelet 3D embossing folder and emboss.
Adhere to the Coastal Cabana card base.
I used a 1″ x 2 3/4″ scrap of Basic White CS and stamped in Tuxedo Black Memento ink a sentiment from the Prairie Grass stamp set.

I colored the cardstock with a Blending Brush and Flirty Flamingo ink.

I distressed the edges with the edge of my Snips scissors and then popped it up on Stampin’ Dimensionals and layered it in the left-hand upper corner of the card.

I added some black dots to finish off this dramatic silhouette faux layer card!

Try this technique and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – azure afternoon, coastal cabana and gorgeous grape

more color mondays – azure afternoon, coastal cabana and gorgeous grape

Sometimes with a special birthday you just need to go the extra mile and create a really special card – today son #2 turns 30 (first of all how can I have two children over 30 – CRAZY!!)

I still am designing cards from the color coach this is an analogous color combination – meaning these three colors are adjacent to one another on the color wheel and work well together.

I am so in love with this card – I saw a similar card from a demonstrator in Australia so I copied the design with different colors and modified a few other things but a special thank you to Julianne R for the inspiration!

Measurements:
BASE 1: Azure Afternoon 5 1/2″ x 11” (14cm x 28cm) scored at 2-¾” & 5-½” (7cm & 14cm) along long edge
BASE 2: Azure Afternoon 2” x 11” (5.1cm x 28cm) scored at 2-¾” & 5-½” (7cm & 14cm) along long edge
Bracket: 1-¾” x 3-3/4 “ (4.4cm x 9.5cm) scored at ½” (1.3cm) in from both ends
DSP Layer: 5-1/8” (13cm) square
DSP Layers: 2-3/8” x 5-1/8” (6cm x 13cm) (cut 2)
Azure Afternoon Base 2 bottom layers:
1-⅝ x 5-⅛” (4.1cm x 13cm) AND 1-⅝ x 2-3/8”
(4.1cm x 6cm) (cut 2)
Basic White CS:
Base 2 Layers: 1-3/4” x 2-1/2” (4.4cm x 6.4cm) (cut 2)
Base 2 Layer: 1-¾” x 5-¼” (4.4cm x 13.3cm)
DSP Matte layers:
2-1/2” x 5-¼” (6.4cm x 13.3cm) (cut 2)
5-1/4” (13.3cm) square
scraps for stamping and die cutting 3 boats

This is a bunch of cutting but it is a WOW Card for sure!

Score the 5 1/2″ x 11″ BASE 1 at 2 3/4″ and 5 1/2″.

Fold into a Z fold.

Adhere the 5 1/8″ DSP square layer onto the 5 1/4″ Basic White square layer and then adhere these to the third panel which will be the back inside panel.

Cut another DSP sheet to 5 1/8″ long and then cut two consecutive 2 3/8″ cuts so the images match together when adhered.

Adhere the DSP pieces to the 2 1/2″ x 5 1/4″ layers of Basic white CS. Adhere these pieces to the first and second panel in order so that the images flow into one another.

Take BASE 2 and fold it in half – run it through the Stampin’ Cut and Emboss machine with the wave edgelit from the Sunrise Sailing die set. The edgelit will cut through both layers at once.
Cut the Basic White layers and the Azure Afternoon layers with the different edgelits.

I used the same edgelit on all Azure Afternoon pieces as the BASE 2 and the different edgelit for the Basic White CS pieces.

Take the three Azure Afternoon layers and emboss them in the bottom part of the Sunrise Sailing hybrid embossing folder.
Position the long side of BASE 2 on the left.

Adhere the Basic White pieces onto BASE 2 leaving an even top border showing.

Adhere the embossed Azure Afternoon pieces over the Basic White layers leaving an even top border showing.
Fold the BASE 2 z fold and lay the long side of the BASE 2 onto the first panel of BASE 1.

Adhere only the portion of BASE 2 that touches the first panel.

Adhere the back of the third panel of BASE 2 and close the card making sure that the card is laying flat and adhere the BASE 2 Z fold to the BASE 1 Z fold.

Place Multi-Purpose Liquid Glue onto both small scored edges of the bracket.

Place in between the small box created by the joining of BASE 1 and BASE 2.

Place it towards the top of the BASE 2 edge just below the edge so you cannot see it but when the boat is attached it is high enough to be seen.

Stamp three boats from the Sunrise Sailing stamp set in Tuxedo Black Memento ink.

Stamp each boat with the boat fill in stamp and sail stripes in the analogous colors for this color challenge: Azure Afternoon, Coastal Cabana and Gorgeous Grape inks.

Die cut the boats out.

Run the boats through the embossing folder to give them a little embossed definition.
I used the Take Your Pick Tool attachment cutting knife to cut out the center piece between the two sails.
Take the first boat and adhere Stampin’ Dimensionals to the left-hand side of the boat and stick onto the first panel edge at the water-wave line.
Adhere the second boat onto the bracket so that the boat sticks up and looks like it is floating on the waves.
Adhere the last boat onto the last DSP panel at the water-wave line.
I added the Holographic Resin Dots from the Celebratory Sips Suite of Online Exclusive products for some fun clear shimmery embellishments like reflections on the water!

I stamped “You’re Destined for Great Things” on the first panel in Tuxedo Black Memento Ink and Happy Birthday from a retired set for the inside panel.

This advanced stamping project is so worth the extra time for a special WOW card for a special someone!

Happy Birthday to my baby boy #2 you deserve all the world can give – hope you like the card because I loved making it for you!

Try making a special project for someone special to you today! Now go create something spectacular – one stamp at a time!

Happy Stampin’
Natalie