dutch barn door fun fold with regal winter paper

dutch barn door fun fold with regal winter paper

Today I have another fun fold to teach you – this one is a Dutch Barn Door fun fold card featuring some beautiful floral Designer Series paper from the current mini catalog called Regal Winter.

Measurements:
BASE: Basic White CS: 8 1/2″ x 8 3/4″
score along the 8 1/2″ side at 2 1/8″ from both
sides.
Score along the 8 3/4″ side at 2 1/4″ and 5 1/2″
DSP: upper dutch door 3″ x 4″
lower dutch barn doors: (2) 1 7/8″ square
Night of Navy CS:
outside matte: 2 7/8″ square
inside matte: 3 7/8″ x 5 1/8″
Basic White CS:
outside sentiment piece: 2 3/4″ square
inside piece: 3 3/4″ x 5″

Cut across the 2 1/4″ score lines to the first intersecting score line at 2 1/8″. Then cut along the 2 1/8″ score line through the 5 1/2″ intersecting score line and cut to the top of the card stock. Do this on both sides of the card, see photo!
The small “doors” on the bottom of the card base will fold inward to meet each other in the middle of the card and the top piece will fold downward towards the barn doors and meet in the middle as well.
Cut the Basic White and Night of Navy cardstock as above in the Measurement section.
Cut the DSP if there is a pattern try to cut the pattern so it matches or at least is adhered in the same direction.
Adhere the 1 7/8″ square DSP pieces to the barn doors on the bottom.
Adhere the inside Night of Navy 3 7/8″ x 5 1/8″ matte to the 3 3/4″ x 5″ Basic White to each other and adhere to the inside of the card – hiding the 2 1/4″ score line.
Adhere the larger DSP to the top panel.
I stamped the “MAY YOUR HOLIDAY SEASON BE FILLED WITH WARMTH AND Cheerful Celebration” sentiment with Night of Navy ink onto the smaller Basic White piece. Brush with Night of Navy Blending Brush and adhere to the Night of Navy matte.
Place a strip of Tear & Tape to the top of the backside of the sentiment pieces and add to the top flap of the card when it is closed.
Add Rhinestone Basic Jewels to the sentiment piece and this fun fold card is complete! I really liked this paper but didn’t purchase the set that goes with it. This DSP is so pretty it can stand alone with just adding a sentiment from a set you already own! I love this non-traditional Holiday card!
Try one for yourself – take non traditional colors or paper and create a lovely and unexpected holiday card!
Now go and create some art work of your very own – one stamp, one sentiment, one sheet of DSP at a time!

Happy Stampin’
Natalie

more color mondays – pecan pie, old olive and mossy meadow tri-fold tuck card

more color mondays – pecan pie, old olive and mossy meadow tri-fold tuck card

Today’s More Color Monday gives off woodsy vibes of pine trees and Christmas and was inspired by the newly available Online Exclusive Christmas suite called Seasons of Green and Gold Suite #164121 and includes:

GREETINGS OF THE SEASON PHOTOPOLYMER STAMP SET (10% off)
* 21 photopolymer stamps
* Suggested clear blocks (sold separately): c, d, e, h

GREETINGS OF THE SEASON DIES (10% off)
* 9 dies
* Largest die: 2-1/2″ x 3-3/4″ (6.4 x 9.5 cm)
* Use with a Stampin’ Cut & Emboss Machine
* Compatible with the Mini Stampin’ Cut & Emboss Machine

GOLDEN GREENERY PHOTOPOLYMER STAMP SET (10% off)
* 12 photopolymer stamps
* Suggested clear blocks (sold separately): c, d, e

GOLDEN GREENERY DIES (10% off)
* 13 dies
* Largest die: 2-7/8″ x 4″ (7.3 x 10.2 cm)
* Use with a Stampin’ Cut & Emboss Machine
* Compatible with the Mini Stampin’ Cut & Emboss Machine

SEASON OF GREEN & GOLD 12″ X 12″ (30.5 X 30.5 CM) SPECIALTY DESIGNER SERIES PAPER
* 12 sheets of patterned paper: 2 each of 6 double-sided designs
* 12″ x 12″ (30.5 x 30.5 cm)
* Acid free
* Lignin free

GRACEFUL GREENERY VELLUM 12″ X 12″ (30.5 X 30.5 CM) SPECIALTY DESIGNER SERIES PAPER
* 6 sheets of patterned paper: 2 each of 3 single-sided designs
* 12″ x 12″ (30.5 x 30.5 cm)

VERY VANILLA 3/4″ (1.9 CM) SATIN RIBBON
* Width: 3/4″ (1.9 cm)
* Length: 10 yards (9.1 m)

CHERRY COBBLER & PEARL ADHESIVE-BACKED BERRIES
* 64 adhesive-backed pieces
* 4 mm, 8 mm

Product colors: Garden Green, gold, Mossy Meadow, Old Olive, Pecan Pie, Very Vanilla

Add ink, cardstock, and adhesive to complete your projects.

Measurements:
BASE: Mossy Meadow 4 1/4″ x 5 1/2″
Old Olive layer: 4″ x 11″ scored at 2 7/8″
and 8 1/4″
scraps for die cuts
Basic White layer: 3 3/4″ x 5 1/8″
DSP: (2) 2 3/4″ x 3 3/4″
Pecan Pie: scraps for die cuts

Die cut 2 of the second largest squares from the Stylish Shapes die set in Old Olive cardstock.
Die cut 3 of the largest square from the Stylish Shapes die set in Pecan Pie cardstock.
Cut two different patterns of the DSP.
Die cut a bell from the Season of Green and Gold DSP.

I stamped from the Greetings of the Season stamp set on one of the Old Olive squares and stamped the outside edges with the pine bough stamp in Old Olive ink.
I die cut a bell out of the DSP with the coordinating dies and it wasn’t exactly centered – normally that isn’t very noticeable but I was adding it to darker colored cardstock so I could tell! Let me teach you a little trick! If the die cut’s white border is a little uneven (or in my case NON EXISTENT on one side LOL) die cut a small portion from a scrap strip of white on the same side that you are lacking and adhere it to the die’s backside!
I twisted the Pecan Pie square and rotated it to be a diamond and mounted the Old Olive square on top of the Pecan Pie diamond and adhered the bell die cut – the focal piece is ready to adhere to the card front once ready!
Score the Old Olive piece at 2 7/8″ and 8 1/4″ and fold inward.
Stamp the two step pine bough in the right hand corner of the Basic White layer and then adhere to the center inside panel of the Old Olive layer.
I added an inside sentiment in Pecan Pie.
I usually stamp this prior to adhering down just in case I need to flip the paper over and have a redo but luckily I did it right the first try!
I cut two pieces of different patterns of the Seasons of Green and Gold DSP for the Old Olive layers outside panels and adhered the right side on first.
The front flaps overlap and I want the left side of the flap to remain on top when the card is closed! I adhered the more foliage heavy DSP to this side.
I used one of the Pecan Pie Stylish Shapes die cuts and scored about 1/4″ to the right of the top point when angled as a diamond. score the paper and adhere underneath the DSP. I adhered my DSP for this layer early and then decided to make this a tuck card so I would adhere this side DSP at this point and not as I did in the photos – it will be easier!
Place adhesive on the Pecan Pie diamond on the right side of where the diamond meets the DSP.
Adhere down in place.
Add half of the Old Olive die leaving about 1/4″ border from the edges of the Pecan Pie diamond.
Add Stampin’ Dimensionals to the back of the left side of the focal point – do not place the dimensionals over the line from one point to the other or it will show when you open the card. Match up the top and bottom point of the diamond to the edge of the left hand panel.
I added another half diamond of the Pecan Pie and the Old Olive die cuts to balance out the sides of the card.
I moved the bell die cut over to the left hand side of the focal piece for balance as well since the right hand DSP had bells in the design I moved the bell die cut to the opposite side to balance that element out!
I added Iridescent Foil Gems to fill the card out with shimmer and shine!
The focal point piece tucks under the diamonds on the right hand side of the card to allow the card to remain flat and closed! Fun closure to this sweet fun fold! Double flap tucked card or tri-fold tucked card.
Try this fun fold next time you create some art work of your very own – one stamp at a time!

Happy Stampin’
Natalie

simple stamping with designer series paper

simple stamping with designer series paper

Need a super simple card that still looks beautiful? Let our Designer Series Paper do ALL the work for you! Using just 1/16th of a sheet of 12″ x 12″ DSP you can make this simple and elegant card.

Measurements:
BASE: Summer Splash 4 1/4″ x 11″
scored at 5 1/2″
Basic White CS: 3 1/4″ x 3 1/2″
scrap for sentiment die piece
DSP: (3) 1″ x 3″ pieces

Adhere the 3 pieces of DSP to the Basic White cardstock layer. Position the layer so that the 3″ sides of the DSP are adhered to the 3 1/4″ side leaving an 1/8″ on all sides. I find that it is best to adhere the outside pieces first and then place the middle piece evenly in between the outside pieces.

I stamped a sentiment on the inside of the card base.
Tie the Summer Splash Bordered coordinating ribbon into a knot around the DSP/Basic White layer.
Add Stampin’ Dimensionals to the back of this piece and adhere to the upper center of the card front.
I die cut a scrap of Basic White cardstock with the large banner die from the Stylish Shapes die set and stamped the Happy Birthday in Summer Splash ink from the Unbounded Love bundle. This is a fabulous sentiment set with both inside and outside coordinating sentiments!
I popped up the die onto Stampin’ Dimensionals and placed it on the card front directly below the DSP piece.
I added In Color Shimmer Gems to finish the cards with coordinating sparkle!

Try this super easy card and send out some love to those you care about! Pick out your favorite DSP and go create some fun card – one stamp at a time!

Happy Stampin’
Natalie

unbounded beauty diagonal gate fold card

unbounded beauty diagonal gate fold card

Gate Fold cards are pretty cool and there are so many variations! This one is called a diagonal gate fold card and I used the Unbounded Beauty Designer Series Paper to make this one!
One of the things I absolutely LOVE about our designer series paper (besides the fact that is the most gorgeous paper made) is that the A and B sides coordinate so well! Check out today’s project to see how easy things come together!

Measurements:
BASE: Petunia Pop 4 1/4″ x 5 1/2″ piece,
3″ x 4″ for front sentiment matte
Designer Series Paper: 5 1/4″ x 12″
scored at 2″, 4″, 8″ and 10″
2 3/4″ x 3 3/4″ for front layer
Basic White scrap for sentiment die

Score the DSP at 2″, 4″, 8″, and 10″. Fold into a mountain fold at 2″, valley fold at 4″ and 8″ and mountain fold at 10″.
Focal piece

On the two side panels mark lightly with a pencil at 2″ from the top of the DSP on each side.
Place the 2″ pencil mark into the cutting track and angle the paper so the first score line is also in the track and cut a diagonal line from pencil mark to top of the paper at the score line.
Do this on each side.
Save the triangle pieces.
The top of the gate fold will show the exposed backside of the second panels where the triangular piece was cut away – it will look like this.
Switch the triangles and adhere to the opposite bottom corners.
Adhere the DSP piece to the Petunia Pop 1/4 sheet of cardstock as the base, making sure that the edges are an even amount.
Adhere the small DSP rectangle to the 3″ x 4″ petunia Pop cardstock matte.
From a Basic White cardstock scrap cut a die from the Unbounded Love die set and choose a sentiment (the sentiments from the coordinating set are awesome but I used a sentiment from Something Fancy because I have a niece graduating from Georgetown with a dual MBA and Law degree and this was made specifically for her! I also used the hatchmark image from the Spotlight on Nature for the edging of the sentiment piece then popped it up on Stampin’ Dimensionals and placed it in the center of the DSP focal piece.
Place adhesive only on the back of the left hand side (if you adhere both sides the card will not open!)
Adhere to the center of the left hand panel.
I decided to add a pocket on the inside for a gift card or cash for the graduate!
I cut a scrap of Petunia Pop to 2″ x 3 7/8″ and adhered Tear-n-Tape to both sides and bottom.
I adhered the pocket to the bottom of the inside middle panel!
I took a scrap of the unbounded Love DSP and fussy cut the flowers from that small piece (use them all even the half flowers use them on the edges of the paper!)
I added three 2024-2026 In Color Shimmer Gems to add a lovely sparkle for a well deserved celebration!!

Go make some art work of your very own for a happy celebration or just to let someone know that you are thinking of them – one stamp at a time!

Happy Stampin’
Natalie