creating a scene with dies

creating a scene with dies

Creating a scene with your dies can be so satisfying! The Sunrise Sailing bundle was used to create a lovely seaside scene.

Measurements:
BASE: Coastal Cabana CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
scraps for the boat dies
Basic White CS: (2) 4″ x 5 1/4″
Timid Tiger CS: scrap for the die

Rub Timid Tiger ink with the Blending Brush across the top two thirds of the 4″ x 5 1/4″ Basic White layer.
Rub side to side Strawberry Slush ink with a Blending Brush, creating a sunset sky.
Adhere the Basic White brushed layer to the Coastal Cabana card base.
Emboss the 4″ x 5 1/4″ in the Sunrise Sailing Hybrid Embossing folder.
Tear the seaside bottom of the embossing folder so the waves are all in one piece off the layer.
Adhere the waves embossed part of the layer to the bottom of the colored layer.
Die cut a scrap piece of Timid Tiger CS with the banded circle die from the Spotlight on Nature die set.
Adhere and tuck into the center of the waves embossed layer.
Die cut scraps of Coastal Cabana CS the small and large boat dies.

Adhere the small boat sails onto the boat and place onto the horizon.

Adhere the sails to the large boat and adhere to the middle left-hand side of the water.

Stamp the sentiment to the top left-hand corner of the card.

Adhere Timid Tiger In Color Flat Pearls to finish off the card.

Creating a scene with dies and an embossing folder can be a fun way to design a card – try to create a scene with your dies and create some artwork of your own – one stamp and die at a time!

Happy Stampin’
Natalie

beautiful gallery watercolor gate fold card

beautiful gallery watercolor gate fold card

Happy Friday! I am back in PA after settling my youngest in New England for a summer internship and after spending the day cleaning up dry wall dust that is EVERYWHERE! I took a much needed crafting break and created this gate fold watercolor card! Hope you like it!

Measurements:
BASE: Timid Tiger CS: 5 1/2″ x 8 1/2″
scored at 2 1/8″ in from each end
Fluid 100 paper: (2) 1 1/2″ x 5 1/2″
Basic White CS: scraps for die cuts and
sentiment strip and 4″ x 5 1/4″ inside layer

I used a retired block (sorry I forgot that we had retired the I acrylic block) but you can use any size you have on hand!
I added color to the top third of the block by pressing the ink pad directly onto the acrylic block.

I applied Timid Tiger ink directly onto the middle of the acrylic block (it is ok to overlap a darker ink color but you will contaminate the ink pad if you stamp a lighter ink color over an existing darker color!)
I applied Poppy Parade to the bottom of the acrylic block.
I sprayed the acrylic block with water from a Stampin’ Spritzer and placed the two pieces of Fluid 100 paper together and stamped the block of ink directly onto the middle of the papers. I held the block in place for a few seconds to allow the water and ink color to penetrate the fluid 100 Watercolor paper.
Score the base card 2 1/8″ in from each side of the 8 1/2″ side of the card. Fold inward until the two sides meet in the middle – this is called a gate-fold card.
I added the 4″ x 5 1/4″ Basic White layer to the inside of the card.
I stamped an image from the Gallery Blooms stamp set to the bottom of the Basic White layer for a little added interest!
I adhered the Fluid 100 papers right up to the inside edges of the gate fold.

I die cut two images from the Beautiful Motifs die set in scrap Basic White cardstock and adhered one to each side of the gate fold.

I stamped a thank you sentiment from the Beautiful Motifs stamp set in Timid Tiger to the left hand side of the 1″ x 5 1/2″ Basic White strip and added some flower images from the Gallery Blooms stamp set in Crushed Curry to the right hand side.
I adhered only the left hand side of the sentiment piece so that the card will still open.
I adhered three 2025-2027 In Color Flat Pearls in Timid Tiger to finish off the first version of this card.

I decided to add a little sparkle and depth to the card by adding a splatter technique by tapping the brush tip side of the Poppy Parade Stampin’ Blends over the card front.

I brushed the leaves and petals of the two die cuts with Wink of Stella and the wet brush moves a little of the ink color over the dies as well as added a fine sparkle that is gorgeous but subtle and it does not show well in these photos but trust me it is amazing!
Such a fun card and I am glad to be home and crafting again!

Try this fun fold and some of the techniques I shared and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – real red, timid tiger and old olive sketch #103

more color mondays – real red, timid tiger and old olive sketch #103

Time really does pass by so quickly! Today I am on the road celebrating my baby’s 21st birthday and settling him into the New England area for a summer internship – it seems like just yesterday I was in labor with my last child!! Today’s More Color Monday’s color challenge features the new 6″ x 6″ Regals Designer Series Paper in Real Red and Old Olive and Timid Tiger.

This is a simple sketch combining colors that are on opposite ends of the color wheel close to a triadic combo using the Celebratory Sips Suite of products from the last Online Exclusives release.

Measurements:
Old Olive CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 3/4″ x 5 1/2″and scraps for fussy cutting
Timid Tiger CS: 3 1/2″ x 5 1/2″
Basic White CS: 4″ x 5 1/4″ and scrap for
sentiment

The Celebratory Sips Suite comes with a very cool mini embossing folder combo pack
GLASS & GARDENS EMBOSSING FOLDER
– 2 embossing folders
– 3-3/8″ x 6-1/4″ (8.6 x 15.9 cm)
– Use with a Stampin’ Cut & Emboss Machine (sold separately)
– Compatible with the Mini Stampin’ Cut & Emboss Machine (sold separately)

I used the Glass embossing folder image on the Timid Tiger cardstock.

I adhered the Regals 6″ x 6″ designer series paper in Real Red striped pattern on the edges of the card front leaving about 1/8″ from the edges.
I adhered the Timid Tiger embossed layer to the middle on top of the Designer Series paper.
I stamped the 4″ x 5 1/4″ Basic White layer in Timid Tiger ink the Let’s Celebrate image in triplicate down the center of the layer and added a orange slice in the bottom corner.
Adhere this layer to the inside of the card.
I fussy cut a couple of cocktail images from the Celebratory Sips DSP and added the taller one directly to the Timid Tiger embossed layer and popped up the smaller cocktail glass to one side of the taller glass.
Cut about 6 inches off the Timid Tiger ribbon and fold in half and adhere to the left hand side of the fussy cut cocktail glasses images.
Stamp the sentiment Cheers in Timid Tiger ink and cut an angle at the end of the word, pop the sentiment piece up on Stampin’ Dimensionals and adhere over the ribbon.

Then I added 2025-2027 In Color Flat Pearls to finish off the coordinated look!

Try this card layout with your stash and see what you can create – one stamp at a time!
Enjoy your time as it goes fast – hug your little ones they grow up and tower over you quickly!!

Happy Stampin’
Natalie

more color mondays – secret sea, strawberry slush and timid tiger

more color mondays – secret sea, strawberry slush and timid tiger

I love creating my own background paper and this is one of the easiest ways to do it!
I created a mask using the Stylish Shapes die set, I die cut three concentric circle dies into a
4 1/4″ x 5 1/2″ piece of Basic White card stock to create a blending brushed background perfect to showcase the new Simple Birthday stamp!
This is a great way to showcase color combinations of your choice and for this week’s More Color Mondays color challenge we are featuring the some of the new 2025-2027 In Colors: Strawberry Slush, Timid Tiger and Secret Sea!

Measurements:
BASE: Strawberry Slush CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Timid Tiger CS: 4″ x 5 1/4″
Secret Sea CS: 3 1/2″ x 5″
Basic White CS: scrap for large rectangular die
from the Textured Notes die set
(3) 4 1/4″ x 5 1/2″ for masking

Cut three concentric circle dies from the Stylish Shapes die set on 4 1/4″ x 5 1/2″ sheets of cardstock for masking with Blending Brushes in each of the More Color Mondays color selection for this week.
Using one of the masks color the three circles on the Basic White 4 1/4″ x 5 1/2″ Basic White layer in Strawberry Slush with a Blending Brush. I drag the Blending Brush through the ink pad and then starting off the paper I begin in a circular motion to color the inside of the die cut circles onto the Basic White layer.
Continue with the next clean mask so you don’t muddy the colors and the Blending Brushes.
Move the masks so that the circles are overlapping and in differing positions.
Do all three colors covering the the Basic White layer to your liking!
Take the Timid Tiger layer and emboss in the Mini Corrugated 3D embossing folder.
Die cut the blending brush colored Basic White layer in the Textured Notes rectangular die – I used the second largest die for this card!
I used my Stamparatus for this card which is no longer available but there are other similar stamp positioners on the market – they are great for larger format stamps like the Simple Birthday stamp.
I inked up the stamp in Tuxedo Black Memento ink and stamped it onto the Blending Brush colored die.
Adhere the Timid Tiger embossed layer to the Strawberry Slush card base and then adhere the Secret Sea layer on a tilt.
Adhere the Happy Birthday stamped layer onto the Secret Sea matte layer.
Add three 2025-2027 In Color Flat Pearls to finish off the card with easy coordinated style!

Try this masking technique when you get a chance with dies you own and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – strawberry slush, timid tiger and darling duckling

more color mondays – strawberry slush, timid tiger and darling duckling

Today’s More Color Mondays features a new suite that will debut tomorrow called Florals in Bloom with the Annual Catalog go live date on May 6th.

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 2 1/8″ and 4 1/4″
(2) 1 7/8″” x 5 1/4″
3″ x 3 3/4″ scored at 3/4″, 1 1/2″, 2 1/2″, 3″
scraps for dies
DSP: 4″ x 5 1/4″
Strawberry Slush CS: 4″ x 5 1/4″, scraps for dies
Timid Tiger CS: 3″ x 4 1/2″, scraps for dies
Darling Duckling CS: 3″ x 4″, scraps for dies

Score the card base like a regular Z fold fun fold
at 2 1/8″ and 4 1/4″.
Emboss the two 1 7/8″ x 5 1/4″ layers of Basic White cardstock with the Eyelet 3D embossing folder and adhere to the first two panels of the card base.
Adhere the 4″ x 5 1/4″ layer of DSP from the Florals in Bloom Suite of products set to debut with the New 2025-2026 Annual Catalog tomorrow!
Score the 3″ x 3 3/4″ piece of Basic White cardstock at 3/4″, 1 1/2″, 2 1/2″, 3″.

Adhere the first and fifth panel together to form a rectangular box.

Lay the flattened box in the middle of the DSP layer just to the right of the score line. Flatten the box with the edge toward the inside 4 1/4″ fold of the card. Adhere the inside panel just a sliver away from the score line and close the card front and rub so the box adheres to the second panel.
Open the card and place Stampin’ Seal + or Tear-n-Tape on the inside panel of the box next to the DSP. Close the card and rub on the back of the card to adhere the box to the DSP layer of the card.
Die cut the Strawbarry Slush layer with the second largest Textured Notes dies.

Stamp “where you’re planted” sentiment in Strawberry Slush ink onto a Basic White 1/2″ strip and cut the words apart. Adhere in the center of the die cut layer.

Place adhesive on the top panel of the box and center the Strawberry Slush die layer over the box and adhere to it.
Die cut the Timid Tiger layer with the 3rd largest die from the Textured Notes die set and the Darling Duckling layer with the fourth largest die.
Adhere the Darling Duckling die over the Timid Tiger layer.
Place adhesive on the left side of the back of the two dies and adhere to the middle of the first panel of the card.

Die cut flowers from the Pretty Florals Bundle in the three In Colors.

Adhere the detailed Darling Duckling flower center to the large Timid Tiger flower die and adhere to the right hand corner of the die rectangles.

Stamp the “bloom” sentiment in Strawberry Slush ink and die cut. Adhere to the top of the rectangle dies on an angle.

Stamp the smaller flowers in Strawberry Slush ink – this is a two step stamping image – so stamp the base image on your grid paper and then stamp the flower “stamped off” image on your cardstock. Stamp the detailed smaller flower over the base in full strength and die cut them out. I stamped three flowers at full strength for some variation.
Arrange them around the Timid Tiger die cut and pop some up on Mini Stampin’ Dimensionals.
Add a Darling Duckling bloom with Timid Tiger edge tucked under the Timid Tiger die cut.
Add two of the medium blooms on the inside Strawberry Slush layer.

This is what the Double Decker Pop Up fun fold looks like in a standing position!

I added some small and medium Darling Duckling 2025-2027 In Color Flat Pearls to the smaller flower centers and Strawberry Slush Pearls around the Bloom sentiment!
I added a large Darling Duckling Pearl to the right hand corner of the Strawberry Slush Double Decker layer to finish this lovely Springtime card!

Try this fun fold with your stash and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

Reminder the new Annual Catalog debuts tomorrow so these new items will not be able to be linked.