more color mondays  – daffodil delight, coastal cabana and flirty flamingo

more color mondays – daffodil delight, coastal cabana and flirty flamingo

It’s Monday and that means another color challenge. Today’s challenge features Daffodil Delight, Coastal Cabana and Flirty Flamingo!

I am using a Faux Layering technique and embossing for this simple and stunning card!

Measurements:
BASE: Coastal Cabana CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″ and scrap for
sentiment piece.

Tear post it notes or masking paper and layer on the top and bottom of the 4″ x 5 1/4″ Basic White piece. Leave about 1 1/2″ – 2″ gap in between the post it notes.

Using a Blending Brush, layer Coastal Cabana on the bottom third of the opening.

Using a second blending brush add a layer of Daffodil Delight ink above the Coastal Cabana overlapping the colors slightly!
Using a third blending brush layer Flirty Flamingo across the top of the opening and overlap with the Daffodil Delight slightly – this creates a gradient look and new colors in the mix!
Stamp one of the images from the Online Exclusive Prairie Grass stamp set in Tuxedo Black Memento ink across the Post-It notes three to four times across the paper.
Remove the Post-It notes.
Place the Basic White colored layer in the Eyelet 3D embossing folder and emboss.
Adhere to the Coastal Cabana card base.
I used a 1″ x 2 3/4″ scrap of Basic White CS and stamped in Tuxedo Black Memento ink a sentiment from the Prairie Grass stamp set.

I colored the cardstock with a Blending Brush and Flirty Flamingo ink.

I distressed the edges with the edge of my Snips scissors and then popped it up on Stampin’ Dimensionals and layered it in the left-hand upper corner of the card.

I added some black dots to finish off this dramatic silhouette faux layer card!

Try this technique and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

prairie grass masking card

prairie grass masking card

Using a mask both negative and positive side is a fun way to create a fun and easy background.

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Mask: 4″ x 5 1/4″

Using a Blending Brush, and Balmy Blue ink.
Punch a circle out of the mask layer.
Place the Layer over the card front.

Blend inside the circle punch out.
Remove the mask from the card front.
Stamp the Prairie Grass stamp set in Tuxedo Black Memento ink pad to the left of the mask.
Stamp the sentiment in Tuxedo Black memento ink over the mask.

Stamp the text stamp from the Elements of Text and the splatter images around the card creating a vintage look.

Place some embellishments around the card.

Now we will try the opposite masking.

Using the circle, brush with a Blending Brush outward with the Balmy Blue ink.
Stamp the same Prairie Grass image to the left of the mask. Stamp the sentiment over the mask. Place the embellishments around the sentiments.

Simple and elegant…

Try making a mask and creating a card with both the negative and positive shape! Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

sunrise sailing mask card

sunrise sailing mask card

We are busy! So please forgive the lateness of this post, I was building some IKEA furniture for my new studio late into the night and this morning and totally forgot to post this!

For those of you that do not know me well., I moved a a small lake town in Pennsylvania three years ago and we gutted a lake front property and designed and build our forever home. We had plans to do it in phases and we finally are almost done with the second phase!
We added on some space to the back of the house to include my dream stamping studio – and we are probably a month out from moving day! I am super excited and will share the project at it’s completion sometime in June/July!

Today’s card is a fun masking technique that I have done before taking a negative space from a die cut and creating a mask from it.

Measurements:
BASE: Cloud Cover CS: 5 1/2″ x 11″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″
scrap for additional masking at least 4 1/2″
wide
Secret Sea CS: scraps for the boat dies

Cut a large circle die – I used my favorite die set the Stylish Shapes dies and cut a circle in the top center of a 4 1/4″ x 5 1/2″ piece of Basic White cardstock.
Place over the 4″ x 5 1/4″ piece.
Using Blending brushes and 3 inks: I used Strawberry Slush, Flirty Flamingo and Gorgeous Grape, blend through the mask creating a sunset circle.
Die cut the larger boat from the Sunrise Sailing die set in Secret Sea CS.
Place the boat where you will be adhering it on the card and stamp the water ripple image in Azure Afternoon ink below the boat.
Using a scrap piece of cardstock that is wider than the Basic White layer, plav=ce it across the paper directly above the ripple stamped image.

Blend with Azure Afternoon ink below the scrap mask or use masking paper!

Adhere the boat to the card above the ripple image.
Stamp the bird images around the sunset in Azure Afternoon ink.
Stamp congratulations from the Sunrise Sailing stamp set on the top of the card layer in Azure Afternoon ink.
Adhere the Basic White layer to the Cloud Cover card base.
Stamp a sentiment on the inside of the card!
Add Basic Rhinestones around the sentiment for the final sparkly touch and you are complete!

Try this simple masking technique today and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

florals in bloom sketch #102 card

florals in bloom sketch #102 card

Sketches are one great way to stretch that creative bone in your body that either needs some motivation or inspiration. When you are feeling like you need a little assist there are so many ways to get help!

Many demonstrators and groups post card sketch challenges or online databases of sketches, Pinterest is another great resource and I will be posting occasional card sketches to give my customers inspiration as well!

This card sketch is a SUPER simple one but is awesome for maximizing your 12″ x 12″ Designer Series Paper you can make 9 of these cards out of one 12″ x 12″ piece of paper!

And just by changing out the DSP the cards look totally refreshed and new!

Measurements:
BASE: Pretty Peacock 4 1/4″ x 11″
scored at 5 1/2″
DSP: 4″ square piece cut in half to make
(2) 2″ x 4″ pieces
Basic White CS: 4″ x 5 1/4″ and 1/4″ x 4 1/4″

I usually place a Basic White layer on the inside of the cards I make that use darker colored cardstock to make it easier to write on the inside of the card.
Cut the DSP in half paying attention to the DSP pattern and keeping the design together so the pattern flows once you adhere the DSP to the card front.

Take the top patterned piece and adhere it to the top of the card front leaving an 1/8″ border on the sides and top of the card stock.

Adhere the bottom DSP piece to the bottom of the card front leaving an 1/8″ border on the bottom and sides of the card front.
I stamped the horizontal sentiment stamp from the Blooming Phrases Online Exclusive stamp set that debuted this month in Pretty Peacock ink. I stamped the leaves at the end of the word line in Granny Apple Green ink on the Basic White strip.
Pop up the strip and adhere to the center of the card spacing it evenly in between the top and bottom DSP panels.
I added some two-toned sparkle gems to the card to finish this easy and lovely card!
This is another version with another DSP design from the Florals in Bloom collection.
Just changing the paper can make an entirely different card look!
Try this simple design with your stash of papers and see what you can design – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – secret sea, boho blue and cloud cover

more color mondays – secret sea, boho blue and cloud cover

Today’s More Color Mondays color challenge is all about something old and something new – all in hues of blue! The 2023-2025 In Colors are making their last appearance and taking their final bows and going quickly as of writing this yesterday the Boho Blue ink, cardstock and refills, Pebbled Path cardstock and refill and Wild Wheat cardstock and refill are all SOLD OUT the rest are availabel while supplies last!

I am combining them with two debuting colors from the 2025-2027 In Colors collection: Secret Sea and Cloud Cover!

Also debuting on May 6 is a gorgeous new suite called Beautiful Gallery. The 6″ x 6″ Designer Series Paper steals the show with art gallery inspired painted and sketched designs.

Measurements:
BASE: Secret Sea CS: 5 1/2″ x 8 1/2″
scored at 2 1/8″ and 4 1/2″
Boho Blue CS: (2) 4 1/8″ x 5 3/8″
scrap for sentiment banner matte
Cloud Cover CS: 4″ x 5 1/4″
Basic White CS: 2″ x 5 1/5″ and
scrap for the sentiment piece
DSP: 6″ x 6″

I embossed the Cloud Cover layer in the beautiful new Damask Designs embossing folder and adhered it to one of the Boho Blue layers.
Base your cuts of the 6″ x 6″ DSP on the composition of the painting. You want to cut 3/4″ off of one end to make it 6″ x 5 1/4″ and then cut it into 2 pieces 2″ and 4″ basing the 4″ piece as the front of your finished card.

I cut the 2″ piece down to 1 1/4″ x 5″ as I wanted a little embossed layer border the entire way around the DSP layer.

Adhere the 2″ x 5″ DSP piece on the right-hand side of the embossed layer.

I used a 2″ x 4″ scrap piece of Basic White CS for the left-hand side of the embossed layer and stamped a sentiment from the Beautiful Motifs stamp set in Secret Sea ink – this is a beautiful deep misty navy quite different from our Night of Navy. I adhered it to the side of the DSP.
Adhere this embossed layer to the inside of the z-fold card.
Take the top portion of the 6″ x 6″ DSP piece that you initially cut off and cut it down to 3/4″ x 5 1/4″ and adhere to the 2″ x 5 1/4″ piece of Basic White CS to the middle. Adhere this piece to the middle layer of the z-fold card.
Take the 4″ x 5 1/4″ piece of DSP and adhere it to the second layer of Boho Blue CS then place adhesive on the front panel of the z-fold and attach this layer so that the top, left-hand side and bottom are equally aligned to the front z-fold panel.
Using the back side of this DSP scrap stamp a “just a note” sentiment onto the scrap in Secret Sea ink and cut a banner edge on the right-hand edge. Adhere to a scrap piece of Boho Blue CS and cut a banner edge on the right-hand side to match the DSP banner edge.
Pop up the sentiment piece onto Stampin’ DImensionals and place in the upper left-hand corner of the card front or elsewhere depending on the DSP composition you choose.
I added five new In Color embellishments in Cloud Cover and Secret sea to the card front there are also embellishments which are part of this Beautiful Gallery suite called Pressed Flower motifs and they would have gone nicely with this project as well. All of this will be available to customers in early May! Love it and want to have it now? Join my team and you are able to order it in the pre-order period!

I love the way that extended Z-fold fun fold cards look like a normal card but surprise you when they are opened!

Try this easy fun fold and go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Reminder this post is going live prior to the new In Colors being available so the sneak peak items will not be in the order icons below – these are only available currently to current demonstrators to order in a pre-order but will be available once the 2025-2026 Annual Catalog goes live May 6th,2025!