more color mondays – pretty peacock, melon mambo and poppy parade

more color mondays – pretty peacock, melon mambo and poppy parade

Today’s More Color Mondays color challenge features Pretty Peacock, Melon mambo and Poppy Parade.

There are a couple of fun techniques to this card and a SNEAK PEAK of the Boardwalk Fun Bundle.

Measurements:
BASE: Melon Mambo CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Poppy Parade CS: 4 1/8″ x 5 3/8″, scraps for dies
Basic White CS: (2) 4″ x 5 1/4″
Pretty Peacock CS: scraps for dies
Melon mambo CS: scrap for dies

Adhere the Poppy Parade CS to the Melon Mambo CS base.
Color the bottom of one of the Basic White CS layers with a blending brush with Pretty Peacock ink.
Using another blending brush color the top of the Basic White layer with the Melon Mambo ink.
Color the top of the Basic White layer with a blending brush and Poppy Parade ink.
Spray the glass surface with water and pat the Basic White layer over the water covered glass and mix the watercolor onto the blended color surface.
Dry the layer with a heat tool.

Using the edge of a Versamark ink pad, swipe in lines over the top of the layer and concentrated in a small squiggle down at the bottom.

Sprinkle gold embossing powder over the versamark ink.

Heat with a heat tool until embossing powder melts.
Adhere the watercolored layer onto the card base.
Stamp Happy Birthday in Pretty Peacock ink on the second Basic White layer.

Color over the Basic White layer with the Melon Mambo and Poppy Parade blending brushes.

Die a small palm tree from the Boardwalk Fun die set from Pretty Peacock cardstock. Adhere the palm tree die to the right of the stamped sentiment.

Adhere the layer to the inside of the card.

Die cut the ferris wheel and the taller palm tree in Pretty Peacock CS.

Adhere to the middle of the colored layer on the card front. Pop up the ferris wheel on Stampin’ Dimensionals.

Die cut the ferris wheel carts in Poppy Parade and Melon Mambo cardstock.

Adhere the carts onto the ferris wheel in alternating colors.

Die cut the ticket die in Melon Mambo cardstock.

Stamp the Enjoy the Ride in Melon Mambo ink onto the ticket die.

Pop up the ticket onto the card front on the lower left hand corner at the base of the Ferris Wheel dies.

I love the way this background turned out – try this watercolor and heat embossing technique.

Now go and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

Reminder this card is a SNEAK PEAK of an upcoming stamp bundle – the photo links for the sneak peak items will not be included below until they are available.

more color mondays – pretty peacock, copper, and smoky slate

more color mondays – pretty peacock, copper, and smoky slate

Today’s fun fold card is sometimes called a spanner card or a modified bridge card. Whatever you call this easy fun fold card it is a WOW card!

Measurements:
BASE: Pretty Peacock CS: 4 1/4″ x 11″
scored at 5 1/2″, 1″ x 4 1/4″
Basic White CS: 4″ x 5 1/4″, 3/4″ x 4″, 2″ x 5 1/4″
Textured Metallic Specialty Paper:
(2) 3/4″ x 5 1/4″
Card 2 uses the retired Oxidized Copper
Specialty Paper: (2) 3/4″ x 5 1/4″

Score the 4 1/4″ x 11″ at 5 1/2″.

Cut from the short side 1″ from both sides to the score line.

Adhere the 3/4″ x 5 1/4″ strips of Specialty Paper to the left and right front panels.
Stamp the large base leaf in Smoky Slate ink twice on the 2″ x 5 1/4″ Basic White layer.

Stamp the Top Layer large leaf image in Pretty Peacock ink over the base image.

Burnish the edges with Pretty Peacock ink with a blending brush.

Adhere the 2″ x 5 1/4″ to the center front panel.
Stamp the small base leaves down both sides of the 4″ x 5 1/4″ Basic White layer with Smoky Slate ink – three down each side.

Stamp the top layer of the small leaf in Pretty Peacock ink over all of the Smoky Slate images.

Burnish the edges with the Pretty Peacock ink and a blending brush.

Adhere the layer to the inside of the card.

The 2″ panel is separate from the card front because of the cuts and can be laid down over the inside of the card.
Stamp the “Grateful for you” sentiment in Pretty Peacock ink on the 3/4″ x 4″ layer.

Stamp the smaller leaves in Smoky Slate base and Pretty Peacock ink as the top layer.

Adhere the Basic White layer onto the
1″ x 4 1/4″ Pretty Peacock layer.

Adhere the two edges to the left and right panels.
Finish the card with two Pressed Flower Motif embellishments around the sentiment spanner piece.

Try this fun fold card with your supplies and make some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

direct to paper technique

direct to paper technique

Today’s card is all about direct to paper technique.

Measurements:
BASE: Crumb Cake CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4″ x 5 1/4″
Basic White CS: scrap for die

Emboss the Crumb Cake layer with the Sunflower 3D embossing folder.

Drag the White Craft ink pad lightly over the embossed layer. Continue to drag over the layer until the color covers to your satisfaction.
Stamp the sentiment right justified in Tuxedo Black memento ink on the large banner die cut from the Stylish Shapes die set.
Color the banner die with Crumb Cake ink and a blending brush. I colored the left-hand side darker with the ink.
Adhere the embossed layer to the card base.

Cut the banner die and use the left-hand side for a banner edge.

Adhere the banner edge to the bottom of the sentiment die and adhere the sentiment pieces to the left-hand edge of the layer.
Embellish the card with some sparkly gems to finish this sympathy card.

This white wash direct to paper technique brings the tone on tone embossing to life – try this technique and go create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

artistic leaves z fold

artistic leaves z fold

The Artistic Leaves stamp set is an Online Exclusives two-step stamp set perfect for the Fall.

This Z fold card is an easy fun fold.

Measurements:
BASE: Peach Pie CS: 5 1/2″ x 8 1/2″
Score at 2 1/8″, 4 1/4″
Pumpkin Pie CS: 2 3/4″ x 3″
Basic White CS: 4″ x 5 1/4″, 2 5/8″ x 2 7/8″

Two step stamping features a base layer and a top layer. This provides limitless color possibilities.

Top sample: Calypso Coral Base
Pumpkin Pie Top Layer
Second Sample: Crushed Curry Base
Pumpkin Pie Top Layer
Third Sample: Cherry Cobbler Base
Pumpkin Pie Top Layer
Bottom Sample: Cherry Cobbler Base
Cajun Craze Top Layer

The next sample colors are:

Top sample: Daffodil Delight Base
Crushed Curry Top Layer
Second Sample: Daffodil Delight Base
Calypso Coral Top Layer
Third Sample: Crushed Curry Base
Calypso Coral Top Layer
Bottom Sample: Calypso Coral Base
Cajun Craze Top Layer

These color samples are:

Top sample: Cajun Craze Base
Crushed Curry Top Layer
Second Sample: Cajun Craze Base
Pumpkin Pie Top Layer
Third Sample: Pumpkin Pie Base
Timid Tiger Top Layer
Bottom Sample: Crushed Curry Base
Timid Tiger Top Layer

These color samples are:

Top sample: Real Red Base
Timid Tiger Top Layer
Second Sample: Real Red Base
Calypso Coral Top Layer
Third Sample: Real Red Base
Flirty Flamingo Top Layer
Bottom Sample: Pumpkin Pie Base
Flirty Flamingo Top Layer

I stamped the base of the leaves in Peach Pie – the large leaf on the small Basic White CS layer and three small leaves down the right side of the 4″ x 5 1/4″ layer.
I stamped the top Layer in Pumpkin Pie ink on top of the large leaf.
The convenience of the photopolymer clear stamps to match up the two step stamps is wonderful.
I stamped the top layer of the three small leaves in Pumpkin Pie ink.
Adhere the 4″ x 5 1/4″ to the inside of the card.

Stamp the splatter image in Pumpkin Pie ink on the front flap.

Adhere the Basic White CS layer to the Pumpkin Pie CS layer and adhere the left hand side of the large leaf layer to the middle of the front flap.
Add some embellishments to the card to finish it with a little bling!

Try this simple fun fold and go create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

lights of aurora barn door card

lights of aurora barn door card

The barn door fun fold is one of the easiest fun fold cards to make – seriously – I know I say that cards are easy ALOT but this one is two cuts from a standard card base and then decorate!

Measurements:
BASE: Gorgeous Grape CS: 4 1/4″ x 11″
scored at 5 1/2″
Basic White CS: 4″ x 5 1/4″, 2″ x 5 1/4″
DSP: 2″ x 5 1/8″
Basic Black CS: 2 1/4″ x 5 1/2″

Cut the card base on the left-hand side of the score line at 2 1/4″ down the short side of the cardstock and cut all the way to the score line.
Then cut from the top of the score line down to the 2 1/4″ cut line. You will end up with a “barn door” hinged front flap on the card base.
Adhere the 4″ x 5 1/4″ Basic White layer to the inside of the card base.
Then adhere the DSP to the top of the Basic White layer leaving an even border on the top and sides.
Die cut the small tree line from the Basic Black layer.

Stamp the Sentiment in Berry Burst ink in the center of the 2 ” x 5 1/4″ Basic White layer.

Adhere to the front flap of the card.

Adhere the Basic Black tree die cut to the top of the white front layer.

Place the Frosted Iridescent Dots from the Lights of Aurora Suite Collection around the sentiment on the card front and you are finished with this easy WOW card!

Try this easy fun fold today with your own stamping stash and send me a picture of what you create! Now go and make some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie