stampin' positioner - nataliegramleystamps

using the new stampin’ positioner tool

by nataliegramleystamps | Mar 18, 2026 | stampin' tools

Stampin’ Up!’s new Stampin’ Positioner is the latest in a long line of practical and innovative Stampin’ tools! We are super excited to have a stamp positioning tool back in the Stampin’ Up! inventory and this one is exceptional.

With its spring loaded design, the stamp sits above the paper until you press on the plate and bring the stamp in touch with the cardstock, which makes this design ideal for this card technique!

When you are making a card with a repeating design – it is imperative to place the stamp in an exact position and be able to re-stamp if the image is not perfect. Placement is key for this type of project and this spring loaded board delivers!

Measurements:
BASE: Granny Apple Green CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″, scraps for masking

Place the Basic White CS layer on the bed of the Stampin’ Positioner and place the two magnets down on the paper to hold the paper in place.

Attach the floral stamp onto the Stamp Positioner plate – make sure that it is hovering over the cardstock layer exactly where you would like to have the stamped image.
Ink up the stamp and press down on the sring loaded plate to stamp the image.

Remove the plate and if the image did not stamp properly you can ink again and stamp in the same spot.

If the stamp if complete rotate the paper and place the plate with the stamp over the paper – adjust the paper if the stamp will not stamp in the place that you would like it to be.

Take the masks that you pre-stamped and pre-cut and place one over the stamped image to protect it from the stamp and ink.

Once the second stamp is placed and stamped rotate the paper and mask the image closest to where the new stamp will be.

Place the plate back on the positioner and make sure that when it is stamped it will be in the right place.

Ink up the stamp and press down to stamp, remove the mask and rotate the paper for the last stamp to complete the wreath shape.

For this last stamp placement you will m=need two masks one for the left and right stamped images – cover with the masks, make sure that the stamp is hovering over the place you would like to stamp it. Ink up the stamp and press down on the spring loaded platform plate.

Remove the layer from the Stampin’ Positioner and using blending brushes color the flowers in Poppy Parade ink.

Color the leaves and the outer edges of the layer in Granny Apple Green ink with a blending brush.

Adhere the Basic White CS layer to the Granny Apple Green CS base.

Adhere three embellishments – I used some retired embellishments from the holiday mini but there are many current ones that would look excellent with this card like the Sparkle Dot Essentials!

This Stampin’ Positioner is a great tool to add to your Stampin’ Supplies. Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Product List

Beautiful Motifs Bundle (English)

[165206]

$45.75

Beautiful Motifs Photopolymer Stamp Set (English)

[165198]

$18.00

Gallery Blooms Bundle

[165213]

$53.00

Gallery Blooms Photopolymer Stamp Set

[165211]

$19.00

Basic White 8 1/2" X 11" Cardstock

[166780]

$14.00

Granny Apple Green 8-1/2" X 11" Cardstock

[146990]

$14.00

Granny Apple Green Stampin' Pad

[147095]

$9.00

Poppy Parade Classic Stampin' Pad

[147050]

$9.00

Stampin' Glass Mat Studio (Imperial)

[163987]

$60.00

Paper Trimmer

[152392]

$28.00

Bone Folder

[102300]

$8.00

Stampin' Seal

[152813]

$8.00

Stampin' Seal+

[149699]

$12.00

Tear & Tape Adhesive

[138995]

$7.00

Multipurpose Liquid Glue

[110755]

$6.00

Mini Glue Dots

[103683]

$7.25

Mini Stampin' Dimensionals

[144108]

$4.25

Stampin' Dimensionals

[104430]

$4.25

Paper Snips

[103579]

$12.00

Blending Brushes

[153611]

$15.00

Blending Brushes Storage

[160519]

$16.00

Tear & Tape Adhesive

[154031]

$7.00

Water Painters

[168253]

$13.00

Stampin' Cut & Emboss Machine

[149653]

$140.00

Beautiful Motifs Dies

[165205]

$33.00

Gallery Blooms Dies

[165212]

$40.00

Sparkle Dot Essentials

[166991]

$8.00

← more color mondays - blueberry bushel, berry burst, and crushed curry swirled designs z fold card in 2 colors →

introducing the new stampin’ positioner – available in starter kits now

by nataliegramleystamps | Feb 4, 2026 | card samples, color theory, masculine cards, new catalog, stampin' tools, stamps ink paper, techniques

Stampin’ Up! has introduced the NEW Stampin’ positioner and we are so excited about this new tool. It is currently available to demonstrators as a pre-order and in the starter kits as a FREE bonus item! It will be available to customers soon!

Truthfully I loved our former stamp positioner and was sad to see it go away but this one works very well and I am so ready to have a new tool to use!

The press and pop design is genius and it allows you to hover the stamp over the surface without it touching the paper until you press down on the upper platform piece allowing you one last chance to make sure that the stamp is in the correct position! I love this feature!

This card uses the smaller leaf cluster from the Textured Notes stamp set to make a repetitive stamped wreath!

Measurements:
BASE: Old Olive CS: 4 1/4″ x 11″
scored at 5 1/2″
Basic White CS: (2) 4″ x 5 1/4″

On the platform there is a etched paper corner that allows you to line up your paper and turn it and place it in the exact position!

The positioner comes with 5 pieces: 1 magnetic base plate, 2 magnets designed with plastic lift tabs (brilliant), 1 large stamp plate and one small alignment plate.

I aligned the 4″ x 5 1/4″ Basic White layer in the corner marking shown in the first photo. I secured the paper with the 2 magnets.

Place the stamp sticky flat side up positioned on the paper where you want the image.

Place the large stamp plate in the four posts and press down on the plate to pick up the stamp.

Sometimes new stamps come with a residue and can stick to the paper to prevent this clean the new stamps before using.

Remove the large stamping plate and ink the stamp. Place the large stamping plate back in the four posts of the base.

It hovers over the surface without touching the paper so you can make sure the stamp is in perfect alignment!

Press down on the large stamping plate to stamp and then remove the stamping plate from the base to see if the stamp has transferred to your satisfaction.

If not, re-ink the stamp. place the plate back on the base and press again.

If it is stamped to your satisfaction remove the plate and reposition the paper to the next corner of the paper in the etched corner marking.

Secure the paper with the magnets, re-ink the stamp and place the large stamping plate on the base.

Press down to stamp the image.

Move the paper to the next corner in the etched corner marking.

Repeat the process – re-ink the stamp place the large stamping plate in the base and press down.

Move it to the last corner and then repeat.

Place the paper horizontally on the Stampin’ Positioner and place the stamp in the position you want to stamp it.

Stamp the leaf image to complete the wreath
I forgot to take the first horizontal stamp so this is the paper turned 180 degrees and stamped to close the wreath image!

I placed the layer on my glass mat and blended the edges with the Old Olive ink.

I placed the layer back on the Stampin’ Positioner and placed the sentiment flat side up on the layer where I wanted to stamp it.

I placed the large stamping plate over the sentiment stamp and pressed down to secure the photopolymer stamp on the plate.

I inked it in Old Olive ink and stamped it on the layer.

I wanted to stamp a sentiment from the Prayers and Promises stamp set from the January to April 2026 mini catalog on the inside – this set is photopolymer and I also wanted to stamp the leaf image from the Textured Notes which is red rubber.

These stamps are different widths so you should stamp them separately but I wanted to show you what happens when you mis-stamp something and how easy it is to fix a stamping project with this Stampin’ Positioner!

So I stamped both stamps at the same time and the photopolymer being thinner did not stamp completely. So I removed the leaf stamp and restamped the sentiment – I didn’t even need to re-ink just re-pressed the stamp to the paper!

I blended the edges with a blending brush and some Old Olive ink and adhered it to the inside of the card – crisis averted!

I added a brass butterfly to the inside around the inside sentiment.

I distressed the edges of the front layer and blended the turned down corners with a blending brush and ink.

I adhered the layer to the card front. I added brass butterflies to finish off this sympathy card for a sweet friend that lost her husband.

Cards can be a comfort to let you know that people are thinking about you in your grief – I have received many cards in the past week and they do make a difference – I love that I can make and teach people to make something that brings comfort to those in need of it!

Go and make a card today to send to a friend that needs to hear from you! Go and create your own artwork – one stamp at a time!

Happy Stampin’
Natalie