more color mondays – berry burst, coastal cabana and balmy blue

more color mondays – berry burst, coastal cabana and balmy blue

Have you noticed card sketches in the new Stampin’ Up! 2024-2025 Annual Catalog? I love the new catalog design and all the helpful hints and techniques – to me it seems that it is designed like a crafting magazine and I think this is our best design yet!

I picked out a card sketch for today’s More Color Mondays Color Challenge and the Full of Life Suite with the colors Berry Burst, Coastal Cabana and Balmy Blue.

Measurements:
BASE: Coastal Cabana CS 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 3 1/2″ x 4 1/4″
Berry Burst: scraps for die cuts
Coastal Cabana: scraps for die cuts
Balmy Blue: scraps for die cuts

Sketches make putting a card together super easy! SO I picked out a sketch from page 22 in the new catalog – this page describes Basic Card Design! I picked the second to the last one in the bottom row. I cut my paper and a bunch of different die cuts and started to play with the sketch layout. You may notice that I started out with rectangular dies instead of the circles – just because the sketch has circle shapes in the design does NOT mean you have to use circles! This is the true nature of card sketches – they are the starting point, the springboard to get your own creative juices flowing!
In the end I did like the circle dies better for my card but I tried a bunch of combinations before I settled on what is to follow and sometimes that is the creative process!

I used the leaf stamp from the Full of Life stamp set and randomly stamped the leaves in Coastal Cabana ink on Coastal Cabana cardstock for a tone on tone look. (A tip I tell my customers in my classes – most times when I am stamping on an entire blank piece of cardstock I will stamp and look for a triangular pattern. This goes back to a design principle called the rule of thirds/threes this triangular shap is very pleasing to the eye and if you use it – it helps break that daunting empty page into a smaller section and you are only concentrating on where the next stamp is and not about the whole project!
I adhered the DSP to the card base at an angle and cut out the word friend in Balmy Blue and Coastal Cabana. I die cut the leaf die in Berry Burst and two circles from the Stylish Shapes die set in Balmy Blue and Berry Burst. I die cut the long sentiment piece in Coastal Cabana and stamped the sentiment on that piece.
I arranged and adhered the circle dies next over the Designer Series Paper layer.
I adhered the leaf die with glue to the upper circle die. I used the leaf as the embellishment – the sketch shows a ribbon and I substituted this die as the embellishment.
I popped up the sentiment piece and placed it in the middle of the two circles as in the sketch.
I layered the word dies together with glue and added them to the card over the Berry Burst lower circle.
I added 5 Iridescent Adhesive-Backed Discs 4 in the Berry Burst color and one in the blueish tint on the i in the friend word die!
The card is a simple and easy card sketch card!
Try one of our Annual Catalog card sketches today or one of the many you can find all over the internet! Now go and create a sketch project of your very own – one stamp at a time!

Happy Stampin’
Natalie

unbounded beauty diagonal gate fold card

unbounded beauty diagonal gate fold card

Gate Fold cards are pretty cool and there are so many variations! This one is called a diagonal gate fold card and I used the Unbounded Beauty Designer Series Paper to make this one!
One of the things I absolutely LOVE about our designer series paper (besides the fact that is the most gorgeous paper made) is that the A and B sides coordinate so well! Check out today’s project to see how easy things come together!

Measurements:
BASE: Petunia Pop 4 1/4″ x 5 1/2″ piece,
3″ x 4″ for front sentiment matte
Designer Series Paper: 5 1/4″ x 12″
scored at 2″, 4″, 8″ and 10″
2 3/4″ x 3 3/4″ for front layer
Basic White scrap for sentiment die

Score the DSP at 2″, 4″, 8″, and 10″. Fold into a mountain fold at 2″, valley fold at 4″ and 8″ and mountain fold at 10″.
Focal piece

On the two side panels mark lightly with a pencil at 2″ from the top of the DSP on each side.
Place the 2″ pencil mark into the cutting track and angle the paper so the first score line is also in the track and cut a diagonal line from pencil mark to top of the paper at the score line.
Do this on each side.
Save the triangle pieces.
The top of the gate fold will show the exposed backside of the second panels where the triangular piece was cut away – it will look like this.
Switch the triangles and adhere to the opposite bottom corners.
Adhere the DSP piece to the Petunia Pop 1/4 sheet of cardstock as the base, making sure that the edges are an even amount.
Adhere the small DSP rectangle to the 3″ x 4″ petunia Pop cardstock matte.
From a Basic White cardstock scrap cut a die from the Unbounded Love die set and choose a sentiment (the sentiments from the coordinating set are awesome but I used a sentiment from Something Fancy because I have a niece graduating from Georgetown with a dual MBA and Law degree and this was made specifically for her! I also used the hatchmark image from the Spotlight on Nature for the edging of the sentiment piece then popped it up on Stampin’ Dimensionals and placed it in the center of the DSP focal piece.
Place adhesive only on the back of the left hand side (if you adhere both sides the card will not open!)
Adhere to the center of the left hand panel.
I decided to add a pocket on the inside for a gift card or cash for the graduate!
I cut a scrap of Petunia Pop to 2″ x 3 7/8″ and adhered Tear-n-Tape to both sides and bottom.
I adhered the pocket to the bottom of the inside middle panel!
I took a scrap of the unbounded Love DSP and fussy cut the flowers from that small piece (use them all even the half flowers use them on the edges of the paper!)
I added three 2024-2026 In Color Shimmer Gems to add a lovely sparkle for a well deserved celebration!!

Go make some art work of your very own for a happy celebration or just to let someone know that you are thinking of them – one stamp at a time!

Happy Stampin’
Natalie

tri panel slider card with thoughtful journey dsp

tri panel slider card with thoughtful journey dsp

Looking for an easy and fun interactive stand up card that will WOW those you send this too – then look no farther tan the tri-panel slider card!
The new Thoughtful Journey 6″ x 6″ DSP is exquisite and this is a perfect card to showcase a large portion of it!

Measurements:
BASE: Misty Moonlight 4 1/4″ x 9 1/2″
scored at 1″, 2″, 7 1/2″ and 8 1/2″
Night of Navy CS (2) 1 1/4″ x 5 1/2″
(1) 1 3/4″ x 5 1/2″
DSP 3 1/2″ x 5 1/4″ cut into three sections
1″, 1 1/2″ and 1″ keep in consecutive order
Basic White CS 4″ x 5 1/4″ (optional for the
inside) scraps for die cut and circle die

Score the Base cardstock at 1″, 2″ 7 1/2″ and 8 1/2″ on the long side of the cardstock. Score a mountain fold at 1″ valley fold at 2″ and 7 1/2″ and another mountain fold at 8 1/2″.
Mount the Designer Series Paper on the Night of navy matte pieces the 1″ pieces on the (2) 1 1/4″ pieces of matte cardstock and the 1 1/2″ piece on the 1 3/4″ matte.
Adhere the last one inch of the matte to the top edge of the right hand side panel.
Adhere the last one inch of the larger matte to the middle of the left matte. The easiest way to do this is to push the outside panels inward to close them and lay the top panel over the left edge of the card then match the edges of the middle piece below the top panel making sure that it is straight and adhere to the left hand edge of the card.
Adhere the last smaller matte piece to the right side panel edge placing glue or tape only on the last one inch of the matted piece. It is easiest to adhere while the card is closed matching up the edges of the middle piece right above this bottom piece you are adhering to the card.
Die cut one of the circles from the Spotlight on Nature dies and stamp in Misty Moonlight one of the sentiments from the Thoughtful Wishes stamp set. Adhere to the top panel.
Die cut the larger leaves die from the Thoughtful Wishes die set and position it under the sentiment circle and adhere in the desired position to the middle panel only.
I added embellishments to the sentiment die around the sentiment to finish off this WOW slider card! It is very cool how this card stands for display!

Try this today with some of your own scenic DSP it is a great way to show off pretty papers. Now go and create some art work of your very own own lovely stamp at a time!

Happy Stampin’
Natalie

more color mondays – pecan pie, cherry cobbler and basic beige

more color mondays – pecan pie, cherry cobbler and basic beige

Today is not just another More Color Monday, I also get to introduce a new Core Basic Color from Stampin’ Up! We rarely add a Basic Core Color, I am not sure we ever have actually! We have Basic White, Basic Black and Basic Vanilla and we have added with this new annual catalog Basic Beige! It is a beautiful light beige color that goes well with just about everything!

Today I am pairing it with Pecan Pie and Cherry Cobbler and using the New Seaside Wishes hybrid bundle.

Measurements:
BASE: Cherry Cobbler 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White: scraps for dies
Basic Beige: scraps for dies
Pecan Pie: scraps for dies

Insert a sheet of Basic White cardstock into the hybrid embossing folder fitted with the die and run through the Stampin’ Cut and Emboss machine.
This will cut three different sized sand dollars.
Randomly stamp the small starfish image onto the Cherry Cobbler cardstock with Cherry Cobbler ink for a subtle tone on tone pattern.
I always tell me stampers when you start stamping on a blank page – stamp in triangles – look for patterns of three it is easier to stamp in a pattern and the law of threes makes a pleasing symmetrical and balanced finished product!
Tie a knotted ribbon to the upper edge of the base card with the Basic Beige Bordered ribbon. cut out various dies in Basic Beige and Pecan Pie and arrange them in a desired pattern on the card front. Stamp the sentiment onto one of the banner dies from the Stylish Shapes dies and pop that up over the die created design on the card front.
Add Embellishments to the card front and this delightful seaside wishes card is complete.

I love this set and I hope you enjoyed this latest installment of More Color Mondays. Consider playing along with us and stamping at least once a week – it’s great for your soul and metal health!

Happy Stampin’
Natalie

birthday sparkle kit together alternatives

birthday sparkle kit together alternatives

Well the new design for the website published yesterday! How do you like it? Let me know! While this is not a Paper Pumpkin alternative it is a kit alternative so I placed it within the Paper Pumpkin tab for easy access! Tuesday of this coming week on the 9th of April, I will be hosting the first Kit Together at my home. What is a Kit Together? Stampin’ Up! started selling all-inclusive kits for easy stamping options last year and every month have been releasing new products. To date there are at least 27 past and current kit collections for sale on the website in English and many are available in French as well! The Birthday Sparkle kit released last month and I decided to do an alternatives class with the kit. Interested in joining us from 1-3PM? Send me an RSVP! We are changing the kit slightly and doing four cards instead of 2 cards and 2 tags! One card will be exactly as the directions in the kit, but the others are all alternative cards! If you want to join us the class is $10 for the 4 cards or you can buy the kit for $23 and get the stamp set, ink spot, acrylic block, and all the supplies to make 6 cards and 6 tags.
Below are the pictures from the Stampin’ Up! website of what the kit includes:
” Order # 163865
BIRTHDAY SPARKLE KIT (ENGLISH)
$23.00
Create glittering birthday cards and gift tags with the Birthday Sparkle Kit! This kit includes six cards and six gift tags. Create each project with the included stamp set, die-cut paper pieces, and twine. It also includes other elements such as glitter stickers, pressed wood picks, coordinating envelopes, and gold foil paper pieces! It’s easy to create each project for your recipient or get ahead on your crafting for the year by making quick multiples. Either way, you’ve got a special paper craft that your recipients will love! Also available in French.

Kit includes:
*Birthday Sparkle Photopolymer Stamp Set
*Clear Stamp Block
*Early Espresso Stampin’ Spot
*Predesigned projects
*Step-by-step instructions
*Precut pieces (No prep work! Get right to crafting)
*Make 6 cards and 6 gift tags
*Cards: 3 each of 2 designs; folded card 5-1/2″ x 4-1/4″ (14 x 10.8 cm)
*Gift tags: 3 each of 2 designs; largest tag 2-1/4″ x 3-1/2″ (5.7 x 8.9 cm)
* 6 preprinted envelopes
*Enough adhesive to complete projects
*Gold glitter stickers and pressed wood picks.
*Baker’s Twine in Early Espresso and White
*A 9-7/8″ x 6-1/2″ x 2-3/4″ (25.1 x 16.5 x 7 cm) printed designer box for storage or crafting on the go

Product colors: Basic White, Crumb Cake, Early Espresso, gold glitter

Kits by Stampin’ Up! are perfect for new crafters, busy crafters, or crafters who want quick and easy projects. All-inclusive project kits have everything you need in one box! Give as a gift or try them yourself. Kits are while supplies last. Order today!”

And this is the stamp set that comes in the kit:
I added two Brushed Gold Cards and Envelopes to the mix to change the tags that come in the kit into cards. This item is currently back-ordered but will continue into the new Annual Catalog and should be back soon!
This first card was done exactly according to the kit instructions which are full colored instruction sheets and very helpful for those that do not want to go off-script!

Sweet layers and pop-up balloons make this a beautiful and easy birthday card anyone would be proud to send and happy to receive!

I modified one of the tags and popped it up on the Brushed Gold Cards and Envelopes. Changed the stamping and made a fun and easy card out of one of the tags!
For the second tag card I added a 2″ panel embossed with the polka dots from the Basics 3D embossing folder and popped up the tag over that panel on the Brushed Gold card.
This last card I changed up and added a window sheet and some foam adhesive strips to the mix to make a shaker card with the Iridescent Shaker Circles, which will be retiring. These are a must have if you like to make shaker cards. They are full of fun and whimsy and I love this card!
Come join us Tuesday and if you can’t this is a great kit to buy and have for all those birthday cards needed for the rest of the year! With just a few extra supplies you can double the cards in the kit and get 12 cards instead of 6 cards and 6 tags! there are left over pieces that could easily make another card of two as well!

Now go and create some birthday cards of your own – one stamp at a time!

Happy Stampin’
Natalie