memorable blooms naturally gilded floating element card

memorable blooms naturally gilded floating element card

Today’s card was a card I designed for last month’s library card class and haven’t posted.

This card uses the Memorable Blooms bundle and even though this stamp set has floral and foliage images and would normally lend itself to very feminine cards but this more masculine card uses the leaf sprig from the Memorable Blooms die set in neutral colors.

Measurements:
BASE: Very Vanilla CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
scrap for die
DSP: (2) 3/4″ x 3″ from Naturally Gilded
Specialty paper
(2) 3/4″ x 3″ from the Gold Foil Specialty
paper
Window Sheet: 3″ x 3″

Glue the 3/4″ x 3″ Naturally Gilded Specialty Paper to the top of the Window Sheet.
Glue the 3/4″ x 3″ Golf Foil Specialty Paper to the bottom of the Window Sheet.
Glue the last two Specialty Paper strips to the middle of the Window Sheet spacing evenly.

Place the Window Sheet square in the upper middle of the card and stamp the sentiment below the square in the lower 1/3 of the card in Wild Wheat ink.

Pop up the Window Sheet with Stampin’ Dimensionals strategically placed under the Specialty paper strips so that they do not show.
Adhere the square over the sentiment with the Stampin’ Dimensionals.

Place the Neutral Adhesive-Backed Sequins around the sentiment.

Adhere the die cut over the left-hand side of the popped up square.

out of the box stamping

out of the box stamping

Merry Christmas to all my family, friends and followers! By Christmas day after making loads of Christmas cards for customers and family and friends on my list I am ready for something different!
Today’s blog post is all about extending the stamps you have in your collection and using them in out of the box ways! The stamp bundle I picked today is an Online Exclusive suite called Seasons of Green and Gold that reminds me of the Christmas season with its boughs of Green and accents of gold foiled specialty paper. Instead of using the suite in a traditional manner to make a Christmas season card I used it in it’s golden hues only to make a card suitable for an anniversary or wedding.
I assembled the card based on one of the layouts featured in our 2024 Annual Catalog!

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″ cut off 3/4″ off the left hand
side
scrap for large circle die
3 3/8″ x 4 1/2″ layer
Glimmer Paper: 3/4″ x 5 1/2″
DSP (3) 1: x 4 3/8″

Cut off 3/4″ off the edge of the left-hand side of the 5 1/2″ edge of the BASE.
Adhere the 3/4″ glimmer paper to the left-hand edge.
Adhere the 1″ strips to the gold-foiled Seasons of Green and Gold DSP to the layer of Basic White CS.
Adhere the layer on the base card overhanging the glimmer paper edge.
Stamp the foliage stamp in Wild Wheat.
Stamp the outline in Pebbled Path.
Stamp the large circle from the Stylish Shapes die set with the Friends for Life stamp set – stamp BEST in Wild Wheat on the upper portion of the circle, the wishes sentiment in Pebbled Path ink.
Adhere to the lower middle of the layer popping up with Stampin’ Dimensionals.
Adhere the Petal Pink foiled gems onto the circle die.

An elegant card and out of the box stamping.
Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – misty moonlight, wild wheat and mossy meadow

more color mondays – misty moonlight, wild wheat and mossy meadow

Today’s More Color Monday features a diagonal card on card fun fold with Thoughtful Wishes Specialty Designer Series Paper.

Measurements:
BASE: Misty Moonlight CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Mossy Meadow layer: 3″ x 8 1/2″
scored at 8 1/2″
Thoughtful Wishes DSP: (2) 4″ x 5 1/4″ from 1
die cut a Thoughtful Wishes large foliage die
Wild Wheat CS: 2 3/4″ x 4″
Basic White CS: 2 3/4″ x 4″
scraps for large circle die from Stylish Shapes

Score the 5 1/2″ x 8 1/2″ card base at 4 1/4″
Cut diagonally from the top score line to the corner.
Cut the Specialty Designer Paper in half diagonally.
Adhere the top triangle to the top corner on the right hand side of the card base.
Adhere the lower triangle to the outside of the diagonal section.
Score the 3″ x 8 1/2″ piece at the 4 1/4″.
Adhere the Mossy Meadow CS to the upper center of the back of the card base.
Adhere the Wild Wheat CS piece to the front of the Mossy Meadow CS piece.
Adhere the Basic White layer to the inside of the Mossy Meadow piece.
Adhere the Specialty 3/4″ x 4″ piece onto the Basic White CS, and two thin Wild Wheat pieces.
Die cut one of the Specialty Papers with the large foliage die from the Thoughtful Wishes die.
Die cut from a scrap of Basic White CS the large circle from the Stylish Shape die. Stamp the sentiment in Misty Moonlight ink on the circle. Pop up the circle die onto the smaller card front.
Adhere the Thoughtful Wishes die onto the circle.
Add three blue Regal Foiled Adhesive-Backed Dots around the sentiment in the circle.
Now go and create some art work of your very own – one stamp at a time!

Happy Stampin’
Natalie

most adored square explosion fun fold

most adored square explosion fun fold

Do you love interactive cards – if so you are going to LOVE today’s post!

Today’s card is a square explosion card – pull on these tabs and the square opens up like a flower and reveals a message on the inside – what a cool surprise!

Measurements:
BASE: Flirty Flamingo 4 1/4″ x 5 1/2″
Basic White layer 4″ x 5 1/4″
Flirty Flamingo layer 3 1/4″ square
DSP layer 6″ x 6″ folded and cut
inside white layer 2 3/4″ square

Score the 6″ x 6″ DSP at 1 1/2″ on all sides.
Cut the 4 corners out.
Fold the outside point of the edges cut inward towards the score line to create a triangle, do this on each side.
Starting with the bottom edge fold upwards towards the middle and proceeding clockwaise fold at each score line inward until you get to the last and fourth fold and tuck inside the first fold, creating the explosion square.
Stamp on the inside Basic White square piece in Flirty Flamingo for th Stippled Rose and Sweet Sorbet for the sentiment for a little contrast!
Open up the explosion square and adhere the inside layer to the center square.
Emboss the Basic White 4″ x 5 1/4″ layer in the Layered Florals 3D embossing folder and adhere to the Flirty Flamingo outer layer.
Adhere the explosion square to the Flirty Flamingo layer and adhere with Tear & Tape to the upper center of the card front.
Add Rainbow Adhesive-backed dots to the card. This is what the card looks like closed…
…and opened!

That is fun! try this easy card with some of your papers and show me what you have created – one stamp at a time!

Happy Stampin’
Natalie

center step card with gorgeous oxidized copper specialty paper

center step card with gorgeous oxidized copper specialty paper

Well I was finally able to order the very popular Oxidized Copper Specialty paper and boy is it worth it! It is stunning in person – with a base of Pretty Peacock and Copper Clay tones and an overlay of Copper Foil it is unbelievably eye catching!

Today’s card is a center step fun fold and highlights this paper so well!

Start with the 4 1/4″ side at the top of the paper cutter and the edge of the paper at the 1″ mark to the right of the cutting blade. Place the blade at the 4 1/2″ mark on the cutting guide and cut at the 1″ mark from 4 1/2″ to the 10″ mark.

Measurements:
BASE: Copper Clay 4 1/4″ x 11″ scored at 5 1/2″
scrap for the large leaf veins die cut
DSP: Oxidized Copper (2) 3/4″ x 4 1/4″
scrap for the leaf die
Pretty Peacock: 2″ x 4 1/4″ embossed
Basic White – inside 4″ x 4 1/4″

Flip the paper so the opposite 11″ side is on that right hand 1″ mark.
Repeat the cut on this other side at 1″ mark from 4 1/2″ to 10″ marks.
Place the 11″ side at the top of the paper trimmer and at the 4 1/2″ mark, score above the cut and below the cut lines.

Then at the 5 1/2″ mark, score between the cut marks.

At the 9″ and 10″ marks – score above and below the cut lines.
When you start to bend the score marks it will look like this photo below.
Bend the 9″ score line into a valley and the remainder score lines as mountain folds and bend the card closed as shown in photo.
Cut the additional cardstock and DSP, including a large leaf using the Oxidized Copper Specialty paper and the large veins from the Copper Clay cardstock.
Emboss the Pretty Peacock layer in the 3D exposed Brick embossing folder.
Adhere the Pretty Peacock layer to the middle of the center step.
Adhere the 3/4″ x 4 1/4″ DSP pieces to the side steps.
Adhere the veins to the Oxidized Copper leaf and adhere that to the top center of the center step using Glue to get into the embossed surface.
Take a 3/4″ x 4″ Basic white layer and using Pretty Peacock ink stamp the small leaves and a sentiment on the piece of Cardstock. Adhere this centered to the bottom edge.
Add five Pretty Peacock Adhesive Backed Sequins Trio and the card is complete!

Try this fun fold and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie