layout #105 gallery blooms card

layout #105 gallery blooms card

Sometimes making a card can be a super simple experience especially when you follow a card sketch.

Follow along as I put together a beautiful and simply stamped card using Card Sketch #105!

Measurements:
BASE: Early Espresso CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Crumb Cake CS: 2″ x 5 1/2″
Very Vanilla CS: 4″ x 5 1/4″ and scrap for die cut
DSP: 3″ x 5 1/2″

Score the base Early Espresso card stock in half at 4 1/4″ and fold.

Emboss the 2″ Crumb Cake layer in the Damask Designs embossing folder.

Adhere to the right side of the card front leaving a 1/8″ border on the right-hand side.

Adhere the DSP to the left-hand side of the card front leaving a 1/8″ border on the left-hand side of the card front.
Stamp the three flower image from the Gallery Blooms stamp set in Early Espresso ink on the bottom right hand side of the 4″ x 5 1/4″ Very Vanilla layer and adhere to the inside of the card.
Cut a scrap piece of Very Vanilla CS with one of the larger dies from the Spotlight on Nature circle die set.
Stamp the three flower image from the Gallery Blooms stamp set on the right-hand side of the circle die.
Stamp a sentiment on the upper left-hand side of the circle die.
Pop up the circle die onto Stampin’ Dimensionals and adhere to the lower right-hand side of the card front.
Adhere three Drusy embellishments in gold tone on the card from to finish this simply stamped card sketch design!

Try this simply stamped card sketch with your supplies and show me what you can come up with – one stamp at a time!

Happy Stampin’
Natalie

florals in bloom anniversary card

florals in bloom anniversary card

Today is a simple stamping card using two diagonally cut pieces of designer series paper.

Measurements:
BASE: Pretty in Pink CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: (2) 4″ x 5 1/4″ cut diagonally
Flirty Flamingo CS: scrap for die cuts
Basic White CS: scrap for stamping

Adhere the Florals in Bloom DSP to the base card.
Adhere the other piece of DSP to the bottom corner of the base card.

Stamp the anniversary sentiment onto a Flirty Flamingo CS die cut from the Spotlight on Nature. Add Stampin’ DImensionals onto the back of the die cut and adhere above the intersection of the two diagonal pieces of DSP.

Stamp the butterflies from the Spotlight on Nature stamp set in Tuxedo Black Memento ink. Fussy cut the butterfly and add Stampin’ Dimensionals to the back of the butterfly image.
Add the butterfly to the right corner of the Flirty Flamingo die cut.
Add five Iridescent Pearls around the sentiment and card base.

Try this simple design today and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

more color mondays – secret sea, boho blue and cloud cover

more color mondays – secret sea, boho blue and cloud cover

Today’s More Color Mondays color challenge is all about something old and something new – all in hues of blue! The 2023-2025 In Colors are making their last appearance and taking their final bows and going quickly as of writing this yesterday the Boho Blue ink, cardstock and refills, Pebbled Path cardstock and refill and Wild Wheat cardstock and refill are all SOLD OUT the rest are availabel while supplies last!

I am combining them with two debuting colors from the 2025-2027 In Colors collection: Secret Sea and Cloud Cover!

Also debuting on May 6 is a gorgeous new suite called Beautiful Gallery. The 6″ x 6″ Designer Series Paper steals the show with art gallery inspired painted and sketched designs.

Measurements:
BASE: Secret Sea CS: 5 1/2″ x 8 1/2″
scored at 2 1/8″ and 4 1/2″
Boho Blue CS: (2) 4 1/8″ x 5 3/8″
scrap for sentiment banner matte
Cloud Cover CS: 4″ x 5 1/4″
Basic White CS: 2″ x 5 1/5″ and
scrap for the sentiment piece
DSP: 6″ x 6″

I embossed the Cloud Cover layer in the beautiful new Damask Designs embossing folder and adhered it to one of the Boho Blue layers.
Base your cuts of the 6″ x 6″ DSP on the composition of the painting. You want to cut 3/4″ off of one end to make it 6″ x 5 1/4″ and then cut it into 2 pieces 2″ and 4″ basing the 4″ piece as the front of your finished card.

I cut the 2″ piece down to 1 1/4″ x 5″ as I wanted a little embossed layer border the entire way around the DSP layer.

Adhere the 2″ x 5″ DSP piece on the right-hand side of the embossed layer.

I used a 2″ x 4″ scrap piece of Basic White CS for the left-hand side of the embossed layer and stamped a sentiment from the Beautiful Motifs stamp set in Secret Sea ink – this is a beautiful deep misty navy quite different from our Night of Navy. I adhered it to the side of the DSP.
Adhere this embossed layer to the inside of the z-fold card.
Take the top portion of the 6″ x 6″ DSP piece that you initially cut off and cut it down to 3/4″ x 5 1/4″ and adhere to the 2″ x 5 1/4″ piece of Basic White CS to the middle. Adhere this piece to the middle layer of the z-fold card.
Take the 4″ x 5 1/4″ piece of DSP and adhere it to the second layer of Boho Blue CS then place adhesive on the front panel of the z-fold and attach this layer so that the top, left-hand side and bottom are equally aligned to the front z-fold panel.
Using the back side of this DSP scrap stamp a “just a note” sentiment onto the scrap in Secret Sea ink and cut a banner edge on the right-hand edge. Adhere to a scrap piece of Boho Blue CS and cut a banner edge on the right-hand side to match the DSP banner edge.
Pop up the sentiment piece onto Stampin’ DImensionals and place in the upper left-hand corner of the card front or elsewhere depending on the DSP composition you choose.
I added five new In Color embellishments in Cloud Cover and Secret sea to the card front there are also embellishments which are part of this Beautiful Gallery suite called Pressed Flower motifs and they would have gone nicely with this project as well. All of this will be available to customers in early May! Love it and want to have it now? Join my team and you are able to order it in the pre-order period!

I love the way that extended Z-fold fun fold cards look like a normal card but surprise you when they are opened!

Try this easy fun fold and go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Reminder this post is going live prior to the new In Colors being available so the sneak peak items will not be in the order icons below – these are only available currently to current demonstrators to order in a pre-order but will be available once the 2025-2026 Annual Catalog goes live May 6th,2025!

simple stamping – cut, flip and add a strip cards

simple stamping – cut, flip and add a strip cards

When you first start stamping coming up with a card design can be the most difficult thing. Perusing pinterest and blogs is fun but time consuming and if you are in a pinch and need a card in a hurry this is a fun little trick for fast, easy and beautiful designer series paper cards.

One of the tings I LOVE about our Designer Series Paper beside the fact that the artist’s designs are gorgeous works of art is the fact that the artists strive to make the front and backs of each piece of DSP coordinate! This technique plays into that strength!

This card making technique is called cut-flip and add a strip I first saw it years ago from a fellow demonstrator named Patti B and I thank her for the original inspiration!

Measurements:
BASE: Colored CS to coordinate with the DSP
5 1/2″ x 8 1/2″ scored at 4 1/4″
DSP: 4″ x 5 1/4″, 3/4″ x 4″
Basic White CS: scrap for the sentiments

I made four different cards in a flash with this technique! Three using the Fruit Salad Level One Sale-a-bration DSP and one using the Bloom Impressions Level One Sale-a-bration Rewards!

This one used Pumpkin Pie CS for the base.

I cut the ^” x 6″ piece of DSP to 6″ x 5 1/4″ cutting off the bottom 3/4″ then cut the remianing piece to a 4 ” x 5 1/4″ piece.

Cut the 4″ x 5 1/4″ DSP piece into two sections 2″ x 4″ and 3 1/4″ x 4″.

I adhered the larger piece to the bottom of the card front.
Flip the smaller DSP piece over to the opposite pattern and adhere above the other DSP piece on the top of the card base.
Because I was making multiple cards I took the remaining 3/4″ x 6″ pieces cut from the bottoms of each of the cards and swapped them so I would have a different pattern of DSP for the strip piece but you could easily add a coordinating color of cardstock as the strip as I do in the last example – your choice!
I adhered the DSP strip over the place where the two pieces of DSP meet.
I stamped a sentiment and border from the Hugs for You bundle in coordinating Pumpkin Pie ink and punched it out with the bundle To the Point punch!
I popped up the sentiment punch on Stampin’ Dimensionals and added it over the strip.
I added Sunny Day Iridescent Dots embellishments to finish off this first card!
This second card uses the Fruit Salad Sale-a-bration DSP as well but I backed it on a Daffodil Delight CS base.
I cut and flipped and adhered the DSP to the card stock base.
I added a strip of DSP in between the two dsp pieces.
I stamped a different sentiment from the Hugs for Love bundle in Daffodil Delight with a different border around the words from the complimentary stamp set called Bright Borders which is also designed to work with the To the Point Punch from this bundle and popped it up over the center of the strip.
I added Sunny Day Iridescent Dots embellishments to finish this card as well.
The third card uses a Coastal Cabana base.
I also stamped the sentiment in Coastal Cabana to coordinate.
Cut the DSP as before flip and adhere to the card base.
Adhere the strip over where the two pieces of DSP come together.
I popped up the sentiment punch over the strip and added the Sunny Day Iridescent Dots in the blue hue.

This used the sentiment from the Hugs for Love stamp set and the border from the Bright Borders stamp set.

The last card uses the Bloom Impressions Sale-a-bration DSP and colored cardstock for the strip.
Cut the DSP and adhere the bottom piece to the base card.
Flip the smaller piece of DSP and adhere over the larger piece on the top half of the card base.
I used a 1″ x 4″ piece of Flirty Flamingo Colored cardstock over the area where the two pieces of DSP come together. Then I fussy cut both ends of a 3/4″ x 4″ piece of Berry Burst CS and adhered it over the Flirty Flamingo strip.
I stamped the sentiment in Berry Burst ink and punched out the stamped image with the To the Point punch. I popped it up on Stampin’ Dimensionals and placed it int he center of the strips. I added Sunny Day Iridescent Dots to finish off this last quick and easy card!

Try this technique to make designing a sweet DSP card a snap! Now go and create a card with some DSP you have lying around your craft space! Create some artwork – one stamp at a time.

Happy Stampin’
Natalie

friendly seagulls sale-a-bration card

friendly seagulls sale-a-bration card

We are Sale-a-bration simply stamping today folks easy and fun card using the Level One Sale-a-bration Rewards stamp set Friendly Seagulls. this fun and whimsical stamp set is perfect for a lake girl like me with loads of seagulls flying around here! This set has three gull images, four words and phrases images and five smaller images o f fish, shells, sand or pebbles, french fries and a flock of birds flying.

Measurements:
BASE: Crumb Cake CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″ inside
2 1/4″ x 5 1/4″
Misty Moonlight CS: 2 1/2″ x 5 1/2″
Forever Plaid DSP: 3/8″ x 5 1/2″

Emboss the front section of the base Crumb Cake card with the Soft Waves 3D embossing folder.
Adhere the Misty Moponlight CS layer to the top of the card base leaving about 1/2″ space from the fold.
I stamped the three seagull images across the 2 1/4″ Basic White layer in Tuxedo Black Memento ink and added the “I love you MORE than” sentiment above the seagulls on the left-hand side.
I started to color the wings in Smoky Slate Stampin’ Blends markers.
Adhere the seagull layer to the Misty Moonlight layer on the card front.
Adhere the DSP strip below the Misty Moonlight layer as an accent piece.
I decided I wanted more color deviation in the wing stripes so I added a Basic Black strip in the middle of the wing next to the Smoky Slate colored edge of the wing.
I stamped the words French Fries in the center of the 4″ x 5 1/4″ inside layer in Tuxedo Black Memento ink and added the sleeve of fries image to the left-hand side and colored with Real Red and Pecan Pie Stampin’ Blends.
I adhered the layer on the inside of the card.
I added Daffodil Delight on the webbed feet and the beaks of the seagulls to finish coloring the birds.
Although I have a love-hate relationships with our lake birds (I love to watch them fly around and above the water I just hate the messes they tend to leave behind on the ground LOL)
I do think this stamp set is so much fun!

Have you gathered your list to order so you can earn some FREE goodies of your own? The current hostess code for February is UD4FJSJK
We are in the last month of Sale-a-bration so if you want to earn any of these products get your list ordered!
Now go out and create some artwork of your own – one stamp at a time!

Happy Stampin’
Natalie