building a reflection with light and wonder set

building a reflection with light and wonder set

Have you ever wondered how to create a water reflection scene on a card? Well today I will describe my process that I used to create these cards for this reflection post!

Measurements:
BASE: Gorgeous Grape CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″
Basic Black CS: 2: x 5 1/2″

Die cut the Basic Black layer with the smaller tree die from the Light & Wonder bundle.

Take the 4″ x 5 1/4″ Basic White layer and create a mirror image of the colors you choose for the sunset. I used Gorgeous Grape, Poppy Parade and Pumpkin Pie.

I started with the deepest color (Gorgeous Grape) on top and less on the bottom I used a circular motion for the color on the top but a back and forth motion on the bottom.

I continued with the second deepest color (Poppy Parade) below the Gorgeous Grape and less on the bottom just above the grape – I used a circular motion for the color on the top but a back and forth motion on the bottom.
I colored the middle of the layer with the Pumpkin Pie color and blending brush.
I positioned the die cut and the negative die cut above and below one another to get an idea of the placement.
Using a blending brush and Gray Granite ink I brushed in an upward stroke over the negative die space. Darker on the bottom and lighter as I stroked upward.
I colored over the bottom of the Basic White layer below the tree shadow reflections with a blending brush and Azure Afternoon ink for the water – because there is already color there the blue will color over but not completely mask the color so it looks like the water is reflecting the color in the sky! I placed more blue color closer to the tree line and less at the bottom of the layer.
Using a water painter and a drop of Craft White ink refill I lightly brushed side to side with the brush to streak the water with white lines and then went over the center area with a Wink of Stella glitter pen for a little sparkle!
I stamped the sentiments in Gorgeous Grape ink at the top of the layer.
Adhere the tree die just above the reflection shadow and cut off the overhang.
Adhere the colored layer onto the Gorgeous Grape card base.
I added three of the purple hued Frosted Iridescent Dots from the Lights of Aurora Suite Collection around the sentiment to finish off this stunning card with coordinating sparkle!

The first card that I did with this technique I tried Crushed Curry at the bottom inside of mirroring the colors and it took on a brighter tone like it captured the moments before the sun goes down! Two different looks just by experimenting with the colors used on the background! Try this technique and let me know what you create – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – azure afternoon, berry burst and pool party

more color mondays – azure afternoon, berry burst and pool party

Do you have a BUCKET LIST?

I do – and one of the items on my bucket list is to someday see the Northern Lights!
So when I saw the new mini catalog the very first thing that caught my eye was the Lights of Aurora Suite Collection – I loved EVERYTHING about this – the gorgeous paper, the stamp set with it’s hopeful sentiments and the dies with there silhouette possibilities!

The Designer Series paper steals the show it is stunning but honestly the dies are some of my favorites – I love silhouette style cards and what better as a backdrop than this gorgeous paper!

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4 1/4″ x 5 1/2″
Basic Black CS: 4 1/4″ x 5 1/2″
DSP 6″ x 6″ piece to make 2 cards

This paper is so delicious I made two of the same card design with both edges of this one 6″ x 6″ piece.

Below is a photo from the Stampin’ Up! website that shows the DSP designs.

I cut the DSP to 5 1/2″ wide and then into (2) 3″ sections 3″ x 5 1/2″ pieces.

Adhere the pieces to the top edge of the card base.

Die cut the Basic White layer with the mountain die.
Die cut the black layer with the trees on one side and the mountain edge on the other side using all of the paper to its fullest!
Adhere the white snow mountain die to the black mountain die peaks.
Adhere the mountain die layers to the card below the Designer Series paper.
I popped up the tree silhouette die cut on Stampin’ Dimensionals and adhered it to the bottom edge of the card base over the mountain dies and the DSP.
I stamped in Berry Burst ink the wishing you a year of Wonder for the inside sentiment.
I did the same procedure with the other half od the DSP and adhered Frosted Iridescent Dots to finish off both cards!

I love, love , love this card!!!
Wishing you all a year of wonder! Now go and create some artwork of your very own – one stamp at a time – hopefully a project that you will love like I love this one!

Happy Stampin’
Natalie

more color mondays  – daffodil delight, coastal cabana and flirty flamingo

more color mondays – daffodil delight, coastal cabana and flirty flamingo

It’s Monday and that means another color challenge. Today’s challenge features Daffodil Delight, Coastal Cabana and Flirty Flamingo!

I am using a Faux Layering technique and embossing for this simple and stunning card!

Measurements:
BASE: Coastal Cabana CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″ and scrap for
sentiment piece.

Tear post it notes or masking paper and layer on the top and bottom of the 4″ x 5 1/4″ Basic White piece. Leave about 1 1/2″ – 2″ gap in between the post it notes.

Using a Blending Brush, layer Coastal Cabana on the bottom third of the opening.

Using a second blending brush add a layer of Daffodil Delight ink above the Coastal Cabana overlapping the colors slightly!
Using a third blending brush layer Flirty Flamingo across the top of the opening and overlap with the Daffodil Delight slightly – this creates a gradient look and new colors in the mix!
Stamp one of the images from the Online Exclusive Prairie Grass stamp set in Tuxedo Black Memento ink across the Post-It notes three to four times across the paper.
Remove the Post-It notes.
Place the Basic White colored layer in the Eyelet 3D embossing folder and emboss.
Adhere to the Coastal Cabana card base.
I used a 1″ x 2 3/4″ scrap of Basic White CS and stamped in Tuxedo Black Memento ink a sentiment from the Prairie Grass stamp set.

I colored the cardstock with a Blending Brush and Flirty Flamingo ink.

I distressed the edges with the edge of my Snips scissors and then popped it up on Stampin’ Dimensionals and layered it in the left-hand upper corner of the card.

I added some black dots to finish off this dramatic silhouette faux layer card!

Try this technique and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

sketch #109 prairie grass card

sketch #109 prairie grass card

Today’s card is a card sketch card. #109 card sketch is a fun one – easy and simple!

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
1/4″ strip
Berry Burst CS: 1 1/4″ x 5 1/4″
Pool Party CS: 1 1/4″ x 5 1/4″
Flirty Flamingo CS: 1 1/4″ x 5 1/4″

Stamp the cattails image on each 1 1/4″ colored cardstock strip in Tuxedo Black Memento Ink.
Stamp the sentiment on the 1/4 strip. Cut to
3 1/2″ long.
Adhere the colored cardstock strips leaving 1/8″ border on the three sides.
Adhere the remainder of the colored cardstock.
Pop up the 1/4″ strip over the three colored cardstock toward the top of the card.
Add the embellishments around the sentiment.
The same card with different colors using Old Olive, Lemon Lolly and Garden Green.

This is a great sketch easy to reproduce – try this and see what you can come up with!
Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

prairie grass masking card

prairie grass masking card

Using a mask both negative and positive side is a fun way to create a fun and easy background.

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Mask: 4″ x 5 1/4″

Using a Blending Brush, and Balmy Blue ink.
Punch a circle out of the mask layer.
Place the Layer over the card front.

Blend inside the circle punch out.
Remove the mask from the card front.
Stamp the Prairie Grass stamp set in Tuxedo Black Memento ink pad to the left of the mask.
Stamp the sentiment in Tuxedo Black memento ink over the mask.

Stamp the text stamp from the Elements of Text and the splatter images around the card creating a vintage look.

Place some embellishments around the card.

Now we will try the opposite masking.

Using the circle, brush with a Blending Brush outward with the Balmy Blue ink.
Stamp the same Prairie Grass image to the left of the mask. Stamp the sentiment over the mask. Place the embellishments around the sentiments.

Simple and elegant…

Try making a mask and creating a card with both the negative and positive shape! Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie