graceful evergreen deer hot foil card

graceful evergreen deer hot foil card

The Graceful Evergreen Deer Hot Foil Bundle caught my eye during the pre-release and I just knew it would make beautiful and elegant Christmas cards! I combined it with Silver and Red foil and the Magical Christmas Hot Foil dies and created this easy Christmas card!

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, scraps for hot foiling

Let me take you through the Hot Foil System Instructions first.

Plug in the machine and press the White Button – the platform takes a while to heat up – so be patient and wait for the first beep!

When the platform beeps press the white button and play the hot foil dies on the platform.
The platform will beep a last time and the lights will all be lit – when the green light is on you are ready!

Place the foil cut off the rolls sized enough to cover the dies shiny side down over the dies.

Then add the paper over the foil.

Then cover with the Hot Foil Shim and the Hot Foil Spacer in that order.

Unplug the system and roll through the Stampin’ Cut and Emboss machine VERY SLOWLY. You want ample time for the foil to contact with the paper and transfer!
Remove from the machine I roll through forwards and backwards and then remove the foil from the paper and die cut your beautiful deer out using the Stampin’ Cut and Emboss machine with the BASE plate #1, the Small die adaptor p[late #2 and sandwich the paper and the cutting dies inbetween 2 Cutting Plates #3s.

I also placed the Shining Stars smallest star dies on the paper after cutting the deer for absolutely NO FOIL went to waste!

I also plugged the Hot Foil System back in and redid the steps with the reverse Hot Foil Plate. Because this is such a large plate to heat up I deviate from the original instructions here and place the Reverse Hot Foil Plate on the platform immediately after plugging it in to give it extra time to heat up all that metal!
When the platform beeps press the white button and the yellow button will start blinking allow this extra time to heat up the die.

Press the white button after the second beep and the lights will all be on red-yellow and green and start to build your sandwich, Foil shiny side down, cardstock, shim and spacer!

Now I had plenty of Hot Foil Dies to build my Christmas cards both the regular and reverse images! Regular images photographed on the left and reverse images are on the right side!
Now to build an easy Christmas card background for my hot foil dies to shine!

I used the stamps from this bundle and made two masks by stamping directly on my grid paper and cutting them out close to the stamped images.

I stamped two smaller trees in Granny Apple Green ink on the card front.
Covered one of the trees with a mask.
I stamped the larger trees in Shaded Spruce ink both full strength and stamping off to create some color variation and depth.
I added my word Hot Foil Dies from the Magical Christmas Hot Foil Dies.
Added red foil stars from the Magical Christmas Hot Foil dies and Shining Stars dies.
Added the gorgeous deer die.
And finished the card off with the awesome Christmas embellishments Real Red and White Adhesive-backed Peppermints!

Such a fun Christmas card and the Hot Foil dies make it so elegant!

Try your hand at making some Christmas cards out of your stash today – one stamp at a time!

Happy Stampin’
Natalie

shining stars card sketch challenge

shining stars card sketch challenge

Today’s card uses the Shining Stars product of the month incentive set.

Are you familiar with our Product of the Month incentive? Spend $75 in product and you can get any Product of the Month (POM) that is still available for $5! You can only purchase the Products of the Month one time – (for instance spend $75 this month and you really want the Shining Stars October 2026 POM for $5 – spend another $75 and if the September POM is still available you can get that one for $5 but cannot purchase another October Shining Stars die set because you already got one of those)

This card used the left over watercolor paper from this week’s More Color Monday card using three of the colors from the Stampin’ Up! October Creative Challenge which is a color challenge!

If you missed that post I took a large water painter and brushed the surface of a Fluid 100 watercolor paper with an excess of water. Then I dropped color from three acrylic blocks that I squeezed ink refill bottle drops of ink onto. I allowed the Fluid 100 paper to dry and then die cut the Shining Stars die set from the watercolored paper!

This is also a card sketch challenge #136!

Measurements:
BASE: Hydrangea Hue CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 1 1/2″ x 3 1/2″
Fluid 100 paper: one sheet
Basic White CS: 4″ x 5 1/4″

Emboss the Basic White layer with the Swirls of Magic embossing folder.
Adhere the embossed layer to the Hydrangea Hue card base.
Cut a scrap of Hydrangea hue to 1 1/2″ x 3 1/2″ and stamp (SNEAK PEAK) with an upcoming GREAT sentiment set called Friend Like You in Hybrid Black ink.

Using the Dark Hydrangea Hue Stampin’ Blends alcohol marker I flicked the brush tip side off the inside of the cap to make a splatter effect over the layer!

Pop up the sentiment layer on Stampin’ Dimensionals and place on the bottom center of the embossed layer.

Take the watercolor paper and die cut lots of stars from the POM Shining Stars die set.

Adhere a medium and small star onto the sentiment piece.

Adhere more die cut stars to the embossed layer above the sentiment piece!
I LOVE coordinating your embellishments and the In Color Dots are awesome for color coordination!

I added five dots to the card to finish it off in total color coordination! These stars are so much fun! Try your hand at this card sketch challenge and see what little things you can add to your card! Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

PS – Remember that the stamp set is a SNEAK PEAK from the upcoming November Online Exclusives Friend Like You stamp set and will not be available to customers until November but if you want to join my team you can get it in your demonstrator starter kit as a preorder purchase – JUST ONE OF THE GREAT PERKS TO being a Demonstrator and being on my team!

shining stars card – october product of the month

shining stars card – october product of the month

WELL I THOUGHT I WAS EXCITED ABOUT THE OCTOBER PRODUCT OF THE MONTH BUT…

Now that I have it in my hot little hands it is so much better than I expected!!!!! TWENTY-THREE STARS and oh do I have plans for this $5 die set!!!

This is the first of many things you will see with this AWESOME incentive! Fabulous for both card making and scrapbooking too!

This is a simple rainbow color card using the embedded die technique so simple and so stunning!

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, 4″ x 5 1/4″
Gorgeous Grape CS: 4 1/8″ x 5 3/8″, scraps for
star dies
Azure Afternoon CS: scraps for star dies
Granny Apple Green CS: scraps for star dies
Daffodil Delight CS: scraps for star dies
Pumpkin Pie CS: scraps for star dies
Real Red CS: scraps for star dies

I die cut five of the smallest stars out of each cardstock color so easy to do as there are 12 of that size!

Adhere the first row of 5 starts to the top of the 4″ x 5 1/4″ Basic White CS layer.
Adhere the Pumpkin Pie stars below the Real Red star dies.

Adhere four Daffodil Delight stars leaving the middle one out and stamp the “I’M LUCKY TO HAVE A” sentiment from the upcoming Friend Like You November Online Exclusive stamp set.

Stamp the Friend in the center of the layer below the Daffodil Delight stars and adhere a Granny Apple Green star on either side of the word.
Stamp “LIKE YOU” on the right hand side below friend and then adhere a line of Azure Afternoon stars below that.
Finish with a row of Gorgeous Grape stars to finish off this layer.
Run the star studded layer through the Stampin’ Cut and emboss machine in the Softly Woven 3D embossing folder!
Adhere this layer to a Gorgeous Grape 4 1/8″ x 5 3/8″ layer.
Adhere the Gorgeous Grape layer to the card front and attach Basic Rhinestone Jewels around the sentiment to finish off this sweet friendship card!

I am so excited about this Product of the Month – BEST ONE YET!!! This will not last long so if this appeals to you too – make sure to get an order together and follow along for all the fun things we are going to make together with this $5 incentive!

Now it’s your turn to create some artwork of your very own – one stamp – one star! at a time!

Happy Stampin’,
Natalie

The Friend Like You stamp set is a pre-order right now so as a reminder it is not available to customers until November and will not be listed in the photo links below.