pretty peacock cardstock - nataliegramleystamps

more color mondays – pretty peacock, blackberry bliss and granny apple green

by nataliegramleystamps | Aug 3, 2026 | card samples, color challenge, Designer Series Paper, die cutting, fun fold, my favorites, techniques

Today’s More Color Mondays color challenge features Pretty Peacock, Blackberry Bliss and Granny Apple Green. An unusual color combination but one that works perfectly with the gorgeous Valley in Bloom Designer Series Paper!

This fun fold Pop Up Easel card is a lovely way to display those gorgeous papers and images from the Lily of the Valley bundle.

Measurements:
BASE: Blackberry Bliss CS: 5 1/2″ x 8 1/4″
scored at 2 1/8″ and 4 1/4″
3 1/2″ x 7″, save the 1/4″ cut off for sentiment
decoration
Pretty Peacock CS: scrap for die
DSP: (2) 1 7/8″ x 5 1/4″, 3 1/4″ x 3 1/4″,
3 3/4″ x 5 1/4″
Basic White CS: 3 1/4″ square, 3/4″ x 3 1/4″,
scrap for die

Score base card at 2 1/8″ and 4 1/4″.

I used the Valley in Bloom DSP that has gorgeous Lily of the Valley around the perimeter of the DSP and I cut the paper in order so that the paper would line up with the bottom edge cut for the smaller bottom panel.

Adhere the DSP panels in order.

Die cut consecutive Spotlight on Nature dies with the smaller one in Basic White and the larger one in Pretty Peacock CS.

Make sure that the image will fit on the smaller circle.

Stamp the Lily of the Valley image and the sentiment in Hybrid Black ink.

Using a Blender Pen and ink color in the leaves of the image with Granny Apple Green ink.

Using a Blender Pen and ink color in the edges of the lilies in Blackberry Bliss ink.

Blend the edges of the Basic White circle die with a Blending Brush and Blackberry Bliss ink.

Pop up the Basic White circle die from the Spotlight on Nature die set on Stampin’ Dimensionals and adhere to the Pretty Peacock circle die.

Score the 3 1/2″ x 7″ cardstock in half and adhere the 3 1/4″ square of Basic White Cardstock to the inside panel.

Adhere the back of the smaller card to the largest panel of DSP with the open edge facing toward the smaller panels of DSP (bottom of the card)

I adhered a small slice of DSP to the right-hand side of the Basic White inside panel for perfect coordination.

I adhered the the B side of the DSP for the 3 1/4″ square face up for some contrast and a more subtle pattern under the sentiment focal piece.

Adhere the focal piece to the smaller card -the 3 1/2″ outside square.

Then stamp the easel piece the 3.4″ x 3 1/4″ Basic White piece in Granny Apple Green ink. I stamped the edge of a Lilly of the Valley leaf and colored with a Blender Pen. Stamp the inside sentiment in Granny Apple Green ink. Adhere a 1/4″ x 3 1/4″ strip above the sentiment piece, add Foam Adhesive Strips to the back of the sentiment piece and adhere to the bottom panel of the card (I placed it on the DSP above the 1/8″ cardstock edge, so there is a cardstock edge above and below the sentiment piece when the easel is in place)

I added five Sunset Sparkle Sequins in the white iridescent color around both sentiment pieces.

Tuck the smaller card edge inside the sentiment bottom piece to make this easel card display.

I love a card that displays your beautiful work to the one special enough to send a hand made card to! Try to make an easel card with your next project. Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Product List

Valley In Bloom Suite Collection (English)

[167951]

$93.00

Lily Of The Valley Bundle (English)

[167943]

$49.50

Lily Of The Valley Photopolymer Stamp Set (English)

[167937]

$21.00

Basic White 8 1/2" X 11" Cardstock

[166780]

$14.00

Blackberry Bliss 8-1/2" X 11" Cardstock

[133675]

$14.00

Pretty Peacock 8-1/2" X 11" Cardstock

[150880]

$14.00

Basic Black Hybrid Stampin' Pad

[166648]

$12.00

Blackberry Bliss Classic Stampin' Pad

[147092]

$9.00

Granny Apple Green Stampin' Pad

[147095]

$9.00

Valley In Bloom 12" X 12" (30.5 X 30.5 Cm) Designer Series Paper

[167935]

$13.00

Paper Trimmer

[152392]

$28.00

Stampin' Seal

[152813]

$9.00

Stampin' Seal+

[149699]

$13.00

Tear & Tape Adhesive

[138995]

$7.00

Multipurpose Liquid Glue

[110755]

$6.00

Mini Glue Dots

[103683]

$7.25

Mini Stampin' Dimensionals

[144108]

$4.25

Stampin' Dimensionals

[104430]

$4.25

Blending Brushes

[153611]

$17.00

Blender Pens

[102845]

$14.00

Water Painters

[168253]

$13.00

Tear & Tape Adhesive

[154031]

$7.00

Paper Snips

[103579]

$12.00

Stampin' Cut & Emboss Machine

[149653]

$140.00

Lily Of The Valley Dies

[167942]

$34.00

Spotlight On Nature Dies

[163580]

$35.00

Sunset Sparkle Sequins

[167785]

$8.50

← christmas (fun fold) in july let the dsp do all the work →

more color mondays – pretty peacock, melon mambo and poppy parade

by nataliegramleystamps | Dec 29, 2025 | card samples, color challenge, die cutting, more color mondays, new catalog, techniques

Today’s More Color Mondays color challenge features Pretty Peacock, Melon mambo and Poppy Parade.

There are a couple of fun techniques to this card and a SNEAK PEAK of the Boardwalk Fun Bundle.

Measurements:
BASE: Melon Mambo CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Poppy Parade CS: 4 1/8″ x 5 3/8″, scraps for dies
Basic White CS: (2) 4″ x 5 1/4″
Pretty Peacock CS: scraps for dies
Melon mambo CS: scrap for dies

Adhere the Poppy Parade CS to the Melon Mambo CS base.

Color the bottom of one of the Basic White CS layers with a blending brush with Pretty Peacock ink.

Using another blending brush color the top of the Basic White layer with the Melon Mambo ink.

Color the top of the Basic White layer with a blending brush and Poppy Parade ink.

Spray the glass surface with water and pat the Basic White layer over the water covered glass and mix the watercolor onto the blended color surface.

Dry the layer with a heat tool.

Using the edge of a Versamark ink pad, swipe in lines over the top of the layer and concentrated in a small squiggle down at the bottom.

Sprinkle gold embossing powder over the versamark ink.

Heat with a heat tool until embossing powder melts.

Adhere the watercolored layer onto the card base.

Stamp Happy Birthday in Pretty Peacock ink on the second Basic White layer.

Color over the Basic White layer with the Melon Mambo and Poppy Parade blending brushes.

Die a small palm tree from the Boardwalk Fun die set from Pretty Peacock cardstock. Adhere the palm tree die to the right of the stamped sentiment.

Adhere the layer to the inside of the card.

Die cut the ferris wheel and the taller palm tree in Pretty Peacock CS.

Adhere to the middle of the colored layer on the card front. Pop up the ferris wheel on Stampin’ Dimensionals.

Die cut the ferris wheel carts in Poppy Parade and Melon Mambo cardstock.

Adhere the carts onto the ferris wheel in alternating colors.

Die cut the ticket die in Melon Mambo cardstock.

Stamp the Enjoy the Ride in Melon Mambo ink onto the ticket die.

Pop up the ticket onto the card front on the lower left hand corner at the base of the Ferris Wheel dies.

I love the way this background turned out – try this watercolor and heat embossing technique.

Now go and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

Reminder this card is a SNEAK PEAK of an upcoming stamp bundle – the photo links for the sneak peak items will not be included below until they are available.

Product List

Basic White 8 1/2" X 11" Cardstock

[166780]

$14.00

Melon Mambo 8-1/2" X 11" Cardstock

[115320]

$14.00

Poppy Parade 8-1/2" X 11" Cardstock

[119793]

$14.00

Pretty Peacock 8-1/2" X 11" Cardstock

[150880]

$14.00

Melon Mambo Classic Stampin' Pad

[147051]

$9.00

Versamark Pad

[102283]

$9.50

Paper Trimmer

[152392]

$28.00

Bone Folder

[102300]

$8.00

Stampin' Seal

[152813]

$8.00

Stampin' Seal+

[149699]

$12.00

Tear & Tape Adhesive

[138995]

$7.00

Multipurpose Liquid Glue

[110755]

$6.00

Mini Glue Dots

[103683]

$7.25

Mini Stampin' Dimensionals

[144108]

$4.25

Stampin' Dimensionals

[104430]

$4.25

Paper Snips

[103579]

$12.00

Blending Brushes

[153611]

$15.00

Stampin' Cut & Emboss Machine

[149653]

$140.00

Heat Tool (Us And Canada)

[129053]

$32.00

Metallics Wow! Embossing Powder

[165678]

$21.00

← card sketch #114 - hope, love & joy card double front flap fun fold card - boardwalk fun bundle →

more color mondays – pretty peacock,pecan pie and crumb cake

by nataliegramleystamps | Dec 8, 2025 | card samples, color challenge, die cutting, fun fold, masculine cards, online exclusives

Today’s More Color Mondays theme colors today are Pretty Peacock, Pecan Pie and Crumb Cake – I did not initially get this Stamp/die bundle but was so drawn to it and all of the samples that I found I had to break down and get it!

This fun fold is so simple, it is a regular card with an extra score line which I ended up bending backwards and securing after decorating it with all the lovely dies from this set! I love the consecutive large dies that come with the die set there are so many possibilities!

Measurements:
BASE: Pretty Peacock CS: 5 1/2″ x 8 1/2″
scored at 1 1/4″ and 4 1/4″
scraps for dies
Basic White CS: 4″ x 5 1/4″ and 3/4″ x 5 1/2″
Pecan Pie CS: 4″ x 5 1/4″ and 1/4″ x 5 1/2″
scraps for dies
Crumb Cake CS: 4″ x 5 1/4″ and 1/2″ x 5 1/2″
scraps for dies

Score the BASE at 1 1/4″ and 4 1/4″.

Bend the base card back at 1 1/4″ score line and in half at the 4 1/4″ score line.

I stamped the right-hand edge of the Basic White 4″ x 5 1/4″ layer and adhered it to the inside of the card base.

I cut the Pecan Pie 4″ x 5 1/4″ layer with the second to the smallest consecutive die and the Crumb Cake layer with the smallest die.

Stamp a branch in Early Espresso ink and stamp the small pinecone in the same color on the branches. Stamp the pine needle plumes in Pretty Peacock ink and the Hello as well.

Adhere the Crumb Cake layer to the Pecan Pie matte layer.

Adhere the dies to the middle of the first bent back panel.

Adhere the dies under the panel sticking out around the focal point dies.

Add the Pecan Pie die to the right of the words and pine bough on top of the dies.

Adhere the two pine cone dies on top of the stamped pine cone images.

I added a Basic White strip to the left of the bent back panel and adhered that panel to the card front.

I added another Pretty Peacock pine cluster below the Hello sentiment to add a little more color there.

I added three Streaked Dots which are a lovely new embellishment round dot that is a neutral brown hue with golden streaks and swirls!

I added two more coordinating strips of Pecan Pie and Crumb Cake left overs from cutting the paper to the background of the card base and I love the difference it made in the backdrop of this card!

What a great masculine card using this lovely outdoor pine set. Try to make a masculine card – with great neutral colors and a nature set!
Now go and create some artwork of your very own one stamp at a time!

Happy Stampin’
Natalie