full of life 4 piece puzzle slider card

full of life 4 piece puzzle slider card

Today’s blog post details a Puzzle Fun Fold using the Full of Life 6″ x 6″ DSP sometimes called a 4 Piece Puzzle Slider card.

I love the starburst pieces of this pack of DSP dividing them up in a puzzle creates a very fun card.

Measurements:
BASE: Pool Party CS: 4 1/4″ x 9 1/2″
scored at 1″, 2″ 7 1/2″ and 8 1/2″
Matte pieces (2) 2 1/8″ x 2 1/4″
(2) 2 1/8″ x 3 1/4″
DSP: 3 3/4″ x 5″
Basic White CS: 4″ x 5 1/4″

Cut the Base card 4 1/4″ x 9 1/2″ then score at 1″, 2″, 7 1/2″ and 8 1/2″.
Cut the DSP layer in half at 1 7/8″ on the 3 3/4″ side.
Put the paper back together and cut the top piece at 3″ from the left side.
cut the lower section at 2″ from the left hand side.
Fold the cardstock base in a mountain position at the 1″ score line and a valley position at the 2″ score line. Fold the score at the 7 1/2″ in a valley fold and a mountain fold at the 8 1/2″ score.
Adhere the DSP to the Matte pieces.
Adhere the 4″ x 5 1/4″ Basic White piece to the center panel on the base card.
Adhere the top matted DSP piece to the top of the left hand panel.
Adhere the lower left hand piece to the lower bottom of the left hand panel.
Adhere the lower right-hand matted piece to the lower portion of the right-hand panel.
Adhere the last matted piece to the top portion of the right-hand panel.
On the medium banner from the Stylish Shapes stamp in Pool Party ink the background stamp.
Stamp in Tuxedo Black Memento ink the “thinking of you” sentiment from the Friends for Life stamp set.
Adhere to the lower right-hand corner and cut off the right-hand edge that hangs over.
Color the Iridescent Pearls with a Dark Pool Party Stampin’ Blends Marker. Allow to dry.
Place five colored Iridescent Pearl embellishments onto the card front to finish off the card!
This card stands up on it’s own and such a fun way to display great looking Designer Series Papers! Try this fun fold with your stash and see what artwork you can create – one pattern and one stamp at a time!

Happy Stampin’
Natalie

decorative trees glimmer paper slimline card

decorative trees glimmer paper slimline card

This sparkly slimline card is a great Christmas card full of fun and lots of glimmer!

Slimline Measurements:
BASE: Basic White CS: 7″ x 8 .5″
scored at 3.5″
2.5″ strips for Decorative Trees dies
scrap for the sentiment
In Color Glimmer Specialty Paper 2.5″ strips of
each color
Pool Party Two-Toned cardstock 8 1/2″ x 11″
scored at 2 1/2″, 6 1/2″ on the 8.5″ side
scored at 1 1/2″, 10 1/2″ on the 11″ side

Take the 2.5″ strips of the In Color Glimmer Specialty Paper and die cut the solid large tree.
Take 2.5″ strips of Basic White CS with each different tree designs.
Cut two glimmer trees a little smaller for the swirly smaller tree and one smaller holly leaf tree.

Score the 7″ x 8.5″ card base at 3.5″.
Use a water painter in Summer Splash ink and splatter the card base.
Splatter the card base with the Summer Splash marker, creating diffuse and more marked splatters on the card base.
Blend with a blending brush of each In Color and glue the matching color onto each In Color Glimmer Tree.
Adhere onto the slimline card.
Blend some of the corresponding colors under the trees.
Stamp the “O Christmas Tree” in Summer Splash ink and blend the ends. Pop up the sentiment onto the card front.
Adhere Iridescent Adhesive-Backed Discs onto the card base.
Cut the 12″ x 12″ Pool Party Two-Toned cardstock into 8.5″ x 11″.
Score the 2 1/2″ and 6 1/2″ onto the 8 1/2″ side.
Score the 1 1/2″ and 10 1/2″ onto the 11″ side.
Cut flaps in both sides.
Fold all score lines.
Glue the smaller, long panel over onto the larger panel on the 11″ side.
Glue the smaller flap onto the bottom of the hand-made envelope.
This slim line card and hand-made envelopeis a fun and glimmery Christmas card full of awesome Decorative Trees!
I love these Glimmer Specialty Paper and the sweet sparkly trees, you need some of this paper!
Go out and create some sparkly artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

overlapping tri-fold card

overlapping tri-fold card

Today’s More Color Monday color challenge is all about the colors of Real Red, Crushed Curry and Pumpkin Pie. The Overlapping Tri-Fold fun fold card features an easy card that opens twice to reveal a hidden message.

Measurements:
BASE: Pumpkin Pie 4 1/4″ x 5 1/2″
scrap for die
Real Red: 4 1/8″ x 11″ score at 2 7/8″ flip and
score at 2 3/4″ from the other edge
scrap for die
Crushed Curry: 2 3/4″ x 4″
4″ x 5 1/4″
DSP: 4″ x 4 1/8″, 1/4″ x 4″, 1/2″ x 4″

Stamp the birthday wish sentiment in Tuxedo Black Memento ink and the butterfly stamp on the Crushed Curry layer.
Score the 4 1/8″ x 11″ card at 2 7/8″ then flip the card and score at 2 3/4″ from the other edge. Fold both score lines inward.
I had a couple of DSP 1/4″ x 4″ and 1/2″ x 4″ scraps and adhered them to the left side of the layer.
Adhere the layer to the center of the Real Red layer.
Adhere the center of the back of the Real red card to the Pumpkin Pie 1/4 sheet of cardstock.
On the right hand side adhere the outside and place the DSP layer evenly on the right hand panel.
Emboss the Crushed Curry layer with the Dotted 3D Embossed Folder. Adhere to the left hand panel.
Stamp the “you brighten up so many of my days” in Tuxedo Black Memento ink and the little butterflies around the words on the Real Red Spotlight on Nature die cut.
When you open the right hand panel you can see the back of the DSP.
I put two red Iridescent Adhesive-Backed Discs around the word birthday.
Die cut the same size Spotlight on Nature die in Pumpkin Pie cardstock. Stamp the “Thinking OF You” sentiment in Tuxedo Black Memento ink and the small butterfly on the circle die cut.
Adhere the left hand edge of the pumpkin circle to the left hand panel.
Adhere the white Iridescent Adhesive-Backed Discs around the words.
This is what the inside of the card looks like.
This fun fold is an easy way to use both side s of DSP and a way to use multiple sentiments.

Try this fun fold and create some artwork of your very own – one stamp of a time.

Happy Stampin’
Natalie

card template #3 sketched butterflies card

card template #3 sketched butterflies card

Last week I made another card using a card template and showed that they can be an easy way to design a card.
On page 22 of the Stampin’ Up! 2024-2025 Annual Catalog we have 22 card templates for making cards! I decided to show you how just changing a few things on the card or the DSP can change the look even though all the cards started out with the same template.
I used card template #3 I have counted left to right on the bottom of page 22 and the third layout from the right is the one I will be using!

Measurements:
BASE: Coastal Cabana CS 5 1/2″ x 8 1/2″
scored at 4 1/4″
scrap for butterfly die cuts
DSP: (3) 1 1/8″ x 4 3/4″
Basic White 3 7/8″ x 5″ and scrap for the die cut

card #2
BASE: Pool Party 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP (3) 1″ x 4 1/8″
Basic White 3 1/2″ x 5″ scrap for sentiment

Card #3
BASE: Pool Party 5 1/2″ x 8 1/2″
scored at 4 1/4″
scrap for sentiment matte
DSP (3) 1″ x 4 1/8″
Basic White 3 1/2″ x 5″ scrap for sentiment

Card #4
BASE: Misty Moonlight 5 1/2″ x 8 1/2″
scored at 4 1/4″ edge torn off front
DSP (3) 1″ x 5″
Basic White 3 1/2″ x 5 1/4″ scrap for sentiment
and strip for inside edge of card

card #5
BASE: Boho Blue 5 1/2″ x 8 1/2″
scored at 2 1/8″ and 4 1/4″ z-fold
scrap for sentiment matte
DSP (3) 1″ x 5″ (1) 3/4″ x 5 1/2″
Basic White 3 1/2″ x 5 1/4″ scrap for sentiment
Petal Pink scrap for leaf die cut

Cut the DSP to 3 strips of 1 1/8″ x 4 3/4″ and die cut the trio of butterflies out of Coastal Cabana card stock from the Sketched Butterflies die set.
Adhere the DSP strips to the Basic White layer.
Adhere the layer to the card front.
Brush Coastal Cabana ink using a Blending Brush onto a small Deckle Circle die cut and stamp the birthday sentiment from the Sketched Butterflies set onto the die. Individually ink up one of the smaller butterflies from the small butterfly cluster and stamp onto the circle die.
Pop up in the center of the sun burst.
Adhere the three Silver Drusy Adhesive-Backed embellishments onto the card to finish it off.
For card #2 take some Thoughtful Journey DSP and cut 3 strips of 1″ x 4 5/8″ and mount onto the Basic White layer.
Mount the DSP/White layer onto the card front.
Die cut a small circle from the Spotlight on Nature die set and stamp “You’re A True blessing” from the Unbounded Love stamp set in Coastal Cabana ink. I used some retired embellishments to finish the card.
For card #3 I cut (3) 1″ x 5″ strips and adhered them onto the Basic White cardstock layer.
I tied a Summer Splash ribbon around that layer and mounted it onto the card front.
I cut Pool Party and Basic White concentric banners from the Nested Essentials die set and stamped the “Hope” from the Unbounded Love stamp set in Coastal Cabana ink. I added a Petal Pink die cut leaf from the Unbounded Love die set and added some retired embellishments to finish off the card!
For the inside of card #3 I added a 3/4″ x 5 1/2″ strip of Thoughtful Journey DSP and stamped the inside sentiment from the Unbounded Love stamp set.
Card #4
Is the same as the last card but I pushed the edge of the Basic White layer to 1/8″ from the left fold and then tore the right hand edge of the card. I added a 1/4″ Basic White strip (which I always have a ton of to add some visual interest to the card.
I stamped a sentiment from the Always With Me stamp set and popped up the Spotlight on Nature die on the lower right hand side of the card front to finish it off!
For my last card sample card #5 I made a Z-fold scoring the Boho Blue cardstock at 2 1/8″ and 4 1/4″.
I adhered 3 strips of 1″ x 5″ Thoughtful Journey DSP to the Basic White layer and adhered it to the first panel careful to only adhere the left hand section of the card to the z-fold.
I added the banners from the Nested Essentials and the Petal Pink leaf die from the unbounded Love set.
I adhered a DSP strip 3/4″ x 5 1/2″ to the inside right edge and stamped the inside greeting. I added retired embellishments to finish this last card!

Using card templates can be a great way to add some different card making skills, add inspiration if you are stuck for some ideas or give you a way to create with friends and see all of the different ways to interpret the card layout given!
Try one today and see what card interpretations you come up with this card layout or one of the other ones on page 22 of the Annual Catalog!
Now go and create a card of your very own – one stamp at a time!

Happy Stampin’
Natalie

This card is a little variation on the sketch using the strips from the Full of Life 6″ x 6″ DSP.
adventurous sky masculine birthday card

adventurous sky masculine birthday card

Masculine cards can be difficult for some people – flowers and butterflies are traditionally “girly” cards but not always but making a card for a guy can be a little trickier!
This is one of my go to masculine card sets and it looks beautiful in hues of blue green like Pool Party and Coastal Cabana!

Measurements:
BASE: Coastal Cabana: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White layers: (2) 4″ x 5 1/4″
scraps for die cut plane and clouds

Color one of the Basic White layers with a blending brush and Pool Party and Coastal Cabana ink. I brushed from the outer edges of the paper inward so the darker ink color is on the edges of the paper.
I stamped the clouds where i wanted to place the popped up clouds and colored a little darker around the edges of the clouds with the Coastal Cabana ink.
I stamped the larger cloud image four times in Coastal Cabana ink on Basic White cardstock scraps and die cut them out.
I stamped the large airplane and colored them with Pool Party and Pretty Peacock Stampin’ Blends and Balmy Blue for the propellors.

I colored the whirling propellor blades with Balmy Blue Stampin’ Blends markers and then colored it with the color lifter to give it a see through appearance.

I popped up the clouds except for the one behind the airplane and popped the airplane up on Stampin’ Dimensionals as well.

Stamp the bottom of a die circle from Spotlight on Nature die with the Happy Birthday from the Adventurous Sky stamp set. Adhere at the top of the Blending brushed layer and cut off the top of the circle die.
Adhere the blended layer onto a Basic White layer with just a small border. Then I adhered those layers to the Coastal Cabana base card.
I love this “high flying” masculine happy birthday card – what do you use for your masculine cards. There are some great Designer Series papers like Country Woods and some great masculine stamp sets – need help designing some masculine cards just let me know!

Now go out and create some masculine cards of your own -one stamp at a time!

Happy Stampin’
Natalie