more color mondays – blueberrybushel, strawberry slush and highland heather

more color mondays – blueberrybushel, strawberry slush and highland heather

Today’s post combines two challenges: More color Mondays color challenge and a sketch challenge!

The Waterside Retreat Suite of products for perfect for this challenge for a sweet and easy summer-y card!

Measurements:
BASE: Blueberry Bushel CS: 5 1/2″ x 8 1/2″,
scraps for dies
Strawberry Slush CS: scraps for dies
Highland Heather CS: scraps for dies
DSP: 3″ x 5 1/2″
Basic White CS: (2) 1/2″ x 5 1/2″, 4″ x 5 1/4″,
scrap for sentiment die

Tear one edge of the 1/2″ x 5 1/2″ strips and adhere to the long sides of the DSP.

Die cut the chairs pieces in each color.

Adhere the two chair pieces together in each color.
Adhere the DSP piece to the middle of the card front.

Adhere the Blueberry Bushel CS chair to the DSP.

Adhere the Highland Heather chair to the right-hand side of the DSP piece on the card front.
Adhere the Strawberry Slush chair in between the two other chairs.
Stamp the Relax sentiment in Basic Black Hybrid Ink and die cut the smaller wide banner from the Stylish Shapes die set.

Pop up the die onto Stampin’ Dimensionals and add to the right-hand side below the highland Heather chair.

Adhere three Blueberry Bushel embellishments from the Strawberries and Dots embellishment kit and your cute summery card is complete!

Try making a card with a repetitive stamp or die as I used from the Card Sketch #126 each of the panels I substituted with the chair dies. You could take those panels and use DSP or colored cardstock or use a repeating stamp… the possibilities are endless!

Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’,
Natalie

snowflake kisses diagonal cut half card

snowflake kisses diagonal cut half card

I had a leftover from my studio Stamp-a-Stack class and instead of making another copy of the card I created for class I decided to redesign the card! Here is a fun diagonal cut card using the materials from Monday October 13th’s More Color Monday card post.

Measurements:
BASE: Highland Heather CS: 4 1/4″ x 11″
scored at 5 1/2″, scrap for snowflake die
Basic White CS: (3) 4″ x 5 1/4″
Balmy Blue CS: scrap for snowflake die
Pool Party CS: scrap for snowflake die

Place the card in the Stampin’ Trimmer diagonally and cut the front bottom of the card off.

Place the 2 Basic White layers 1/2 down from the top of the card. Cut two of the Basic White layers by laying them over the base card and marking the diagonal edges so the angle of the diagonal cut will be the same.

Die cut one of the two diagonally cut Basic White layers with the background die from the Snowflake kisses die.

Adhere the die cut to the other diagonally cut Basic White layer.

Adhere the double Basic White layer to the diagonal card base front.
Adhere the last 4″ x 5 1/4″ to the inside of the card.

Stamp the sentiment in the right-hand corner with Gorgeous Grape ink so it can be seen when the card front is closed.

Cut one each of the single snowflakes from the Snowflake Kisses die set in Pool Party, Balmy Blue and Highland Heather cardstock and adhere around the circle in the background die on the card front with Multipurpose Glue.
Adhere three Faceted Snowflake gems to finish the card.

This card uses most of the same products as the card I designed on 10-13-25 but looks very different – amazing what you can do with the same exact products but a different design!

Go out and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – highland heather, balmy blue and pool party

more color mondays – highland heather, balmy blue and pool party

If you have been following me for any length of time you know that I am partial to snowflakes in the winter and butterflies in the summer!

I loved the Snowflake Kisses bundle when it came out with our recent Online Exclusives release this Fall! The beautiful die set paired with the clever sentiments are a must have for anyone like me that loves snowflakes!

Measurements:
BASE: Highland Heather CS: 4 1/4″ x 11″
scored at 5 1/2″ scraps for snowflake dies
Basic White CS: (2) 4″ x 5 1/4″
Balmy Blue CS: scraps for snowflake dies
Pool Party CS: scraps for snowflake dies

Take one of the Basic White CS layers and using blending brushes and burnish the Highland Heather, Balmy Blue and Pool Party inks into the layer.
Take the other Basic White CS layer and die cut with the large snowflake background die from the Snowflake Kisses bundle.
Adhere the snowflake die background to the Blended Background layer and cut any excess from the edges of the colored layer.
Stamp a sentiment into the circle space in Highland Heather ink.
Die cut one or two snowflakes from each colored cardstock scrap.

Arrange the snowflakes around the snowflake background and adhere once satisfied with the arrangement.

Cut the snowflakes that hang over the edge.

Adhere the layer onto the Highland Heather card base.
I added Basic rhinestone Jewels to the center of each snowflake.
I added two more rhinestones around the snowflake sentiment in the center of the card for emphasis.

Don’t you just love this background effect – it is so easy to achieve with a little colored ink and blending brushes – try your hand at creating a background of your very own and then add some stamping and create some great artwork of your own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – cloud cover, fresh freesia and highland heather

more color mondays – cloud cover, fresh freesia and highland heather

For today’s More Color Mondays Color Challenge I pulled from last week’s Sketch Challenge #110 and did a simple card using the Florals in Bloom Designer Series Paper which features pretty floral designs in Bubble Bath, Cloud Cover, Darling Duckling, Garden Green, Granny Apple Green, Peach Pie, Petunia Pop, Pretty In Pink, Secret Sea, Shy Shamrock, Strawberry Slush, Summer Splash, Timid Tiger

I picked the Cloud Cover striped B side of one of the choices of Designer Series paper and a complementary floral pattern for the two DSP pieces!

Measurements:
BASE: Cloud Cover CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″ and 2″ x 3 3/4″
Basic White CS: 4″ x 5 1/4″
Fresh Freesia CS: scrap for the sentiment die
Highland Heather CS: 2″ x 3 3/4″
DSP: (2) 1 3/4″ x 3 1/2″

PLace the 4″ x 5 1/4″ Basic White layer in the Exposed Brick 3D embossing folder. Place the folder in the Stampin’ Cut and Emboss machine using the #1 base platform and the #4 embossing plate. Emboss the layer.
Adhere the Cloud Cover striped DSP piece to the Cloud Cover matte.

Adhere the floral piece to the Highland Heather matte.

Pick a sentiment from The Right Words stamp set and pick a suitably sized Spotlight on Nature circle die.

Stamp the sentiment onto a Fresh Freesia scrap
and die cut with the Spotlight on Nature die using the Stampin’ Cut and Emboss machine with the #1 base, #2 thin die adaptor plate and 2 cutting plates #3’s.

Using the Highland Heather ink and a blending brush color the edges with the ink.

Adhere the Basic White layer to the card base leaving even borders.

Adhere the Cloud Cover DSP piece vertically to the left side of the White embossed layer leaving an even border on the left-hand side.

I adhered the floral DSP layer perpendicular to the Cloud Cover piece positioning it higher on the card so that I could adhere the sentiment piece below and at their junction of the the pieces forming a triangular shape which is appealing to the eye!
Pop up the sentiment piece onto Stampin’ Dimensionals and place in the junction of the two DSP pieces.
I added three Purple Fine Shimmer Gems to finish off the card.

Sketches are a simple way to find your card or project inspiration – try picking out a card sketch today and design a card or scrapbook page from the sketch design! Go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

card sketch #108 – beautiful butterflies

card sketch #108 – beautiful butterflies

Today is another card sketch to get your creative juices flowing! Card Sketch #108 – let’s see what you cane create with this sketch!

This card uses the Beautiful Bokeh Suite with the gorgeous Beautiful Butterflies bundle and the Pastel Ombre Glimmer paper which creates a beautiful sparkling butterfly!

Measurements:
BASE: Fresh Freesia CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
scrap for the large butterfly detailed die
Beautiful Bokeh DSP: 2″ x 5 1/4″
Basic White CS: 2″ x 5 1/4″
scrap for the Stylish Shapes banner die
Pastel Ombre Glimmer paper: scrap for the
solid butterfly die and the butterfly body

Emboss the Basic White 2″ layer with the Beautiful Butterflies hybrid embossing folder.
Adhere the 2″ DSP layer to the left-hand side of the card front.
Die cut the detailed large butterfly die in Fresh Freesia CS.
Die cut the butterfly body and the solid butterfly die from the Pastel Ombre Glimmer paper.
Adhere the butterfly pieces together – solid piece on the bottom, detailed butterfly piece over that and then the glimmer body over both.
Adhere the Basic White embossed layer to the right-hand side of the card front.
Pop up the butterfly on Stampin’ Dimensionals and adhere to the center of the card front.
Stamp the Happy Birthday sentiment from the Beautiful Butterflies stamp set in Highland Heather ink and blend the background with a Blending Brush and Highland Heather ink.
Adhere the sentiment in the lower right-hand corner on Stampin’ Dimensionals.
Adhere the Holographic Resin Dots tot he card front to add a little sparkle to finish off this easy sketch card!
I hate to waste any of the pretty Glimmer Paper so I cut out some of the smaller butterfly die cuts and added one to the card at the end!

What do you think? Try this sketch and let me know what you came up with!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie