layers of beauty – lovely color combination

layers of beauty – lovely color combination

by | Feb 6, 2026 | card samples, card swap, masks, my favorites, techniques

I chose the Layers of Beauty bundle and masks for my February swap card for my demonstrators group and this is the card I came up with. The colors are a soft subtle palette with the flower petals layered with Bubble Bath, Petunia Pop and Blackberry Bliss, with a dash of Lemon Lolly in the daisy flower centers and Gray Granite and Lost Lagoon for the leaves. I paired that with the Textured Metallic Specialty paper for a beautiful card.

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, (2) 4″ x 5 1/4″, 3 3/4″ x 5″
Textured Metallic DSP: scrap for sentiment
matte and word die

Stamp the large floral image on one of the 4″ x 5 1/4″ layers in Memento Tuxedo Black ink.

Take mask #1 from the layers of Beauty masks set and secure it over the image. Use a blending brush and color in the openings with Bubble Bath ink.

Place #2 mask over the floral image and secure with tape.

Use another blending brush and Petunia Pop ink in the openings of mask #2.

For mask #3 use the Blackberry Bliss ink and a blending brush.
Clean mask #3 with water and use Lemon Lolly ink and another blending brush on just the daisy centers.

Use Gray Granite ink for mask #4.
Finally use mask #5 with the Lost Lagoon ink.
The finished masked product is something lovely and easy to reproduce!
Die cut the floral image out.
I cut the large image into 4 different pieces to lay around the sentiments.
Emboss the 3 3/4″ x 5″ layer with the Timber 3D embossing folder.
Adhere the embossed layer to the other 4″ x 5 1/4″ layer.
Die cut the word die “just” from the words of Beauty die set in the Textured Metallic Specialty paper.

Die cut the matte sentiment piece from the Words of Beauty in the Textured Metallic Specialty paper.

Die cut the smaller sentiment piece that fits in the matte piece you just cut from a Basic White scrap.

Using Versamark ink stamp the word LOVELY from the Words of Beauty stamp set and heat emboss with WOW silver embossing powder and a heat tool.
I adhered the single rose piece to the right-hand bottom corner of the embossed layers.
I popped up on Stampin’ Dimensionals the larger two rose colored piece to the left-hand upper corner.
I tucked the daisy piece under the two rose piece and adhered it down to the embossed layer.
I adhered the lovely sentiment heat embossed piece to the textured metallic matte and then popped it up on mini Stampin’ Dimensionals and adhered it to the left-hand lower corner.
I adhered the “just” die cut and dot for the J over the lovely sentiment piece.
Adhere the layers onto a Basic White CS base.
I adhered five Basic Rhinestone Jewels to the card front.
And last but not least I slipped the little curly cue of floral buds under the lovely sentiment piece to finish off the card!

I love coloring this set it is so gratifying!

Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Product List
Layers Of Beauty Bundle (English) [ 163519 ]
[163519]
$56.50
Layers Of Beauty Photopolymer Stamp Set (English) [ 163514 ]
[163514]
$20.00
Words Of Beauty Bundle (English) [ 167090 ]
[167090]
$45.75
Words Of Beauty Photopolymer Stamp Set (English) [ 167083 ]
[167083]
$20.00
Basic White 8 1/2" X 11" Cardstock [ 166780 ]
[166780]
$14.00
Textured Metallic 12" X 12" (30.5 X 30.5 Cm) Specialty Paper [ 163772 ]
[163772]
$8.50
Bubble Bath Classic Stampin' Pad [ 161664 ]
[161664]
$9.00
Blackberry Bliss Classic Stampin' Pad [ 147092 ]
[147092]
$9.00
Gray Granite Classic Stampin' Pad [ 147118 ]
[147118]
$9.00
Lemon Lolly Classic Stampin' Pad [ 161666 ]
[161666]
$9.00
Lost Lagoon Classic Stampin' Pad [ 161678 ]
[161678]
$9.00
Petunia Pop Classic Stampin Pad [ 163811 ]
[163811]
$9.00
Stampin' Glass Mat Studio (Imperial) [ 163987 ]
[163987]
$60.00
Paper Trimmer
[152392]
$28.00
Bone Folder
[102300]
$8.00
Stampin' Seal
[152813]
$8.00
Stampin' Seal+
[149699]
$12.00
Tear & Tape Adhesive
[138995]
$7.00
Multipurpose Liquid Glue
[110755]
$6.00
Mini Glue Dots
[103683]
$7.25
Mini Stampin' Dimensionals
[144108]
$4.25
Stampin' Dimensionals
[104430]
$4.25
Paper Snips
[103579]
$12.00
Blending Brushes [ 153611 ]
[153611]
$15.00
Stampin' Cut & Emboss Machine [ 149653 ]
[149653]
$140.00
Birch Wood 3 D Embossing Folder [ 164069 ]
[164069]
$12.00
Layers Of Beauty Dies [ 163518 ]
[163518]
$30.00
Words Of Beauty Dies (English) [ 167089 ]
[167089]
$31.00
Layers Of Beauty Decorative Masks [ 163517 ]
[163517]
$15.00
Rhinestone Basic Jewels [ 144220 ]
[144220]
$6.00
building a reflection with light and wonder set

building a reflection with light and wonder set

by | Oct 24, 2025 | card samples, die cutting, my favorites, new catalog, techniques

Have you ever wondered how to create a water reflection scene on a card? Well today I will describe my process that I used to create these cards for this reflection post!

Measurements:
BASE: Gorgeous Grape CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″
Basic Black CS: 2: x 5 1/2″

Die cut the Basic Black layer with the smaller tree die from the Light & Wonder bundle.

Take the 4″ x 5 1/4″ Basic White layer and create a mirror image of the colors you choose for the sunset. I used Gorgeous Grape, Poppy Parade and Pumpkin Pie.

I started with the deepest color (Gorgeous Grape) on top and less on the bottom I used a circular motion for the color on the top but a back and forth motion on the bottom.

I continued with the second deepest color (Poppy Parade) below the Gorgeous Grape and less on the bottom just above the grape – I used a circular motion for the color on the top but a back and forth motion on the bottom.
I colored the middle of the layer with the Pumpkin Pie color and blending brush.
I positioned the die cut and the negative die cut above and below one another to get an idea of the placement.
Using a blending brush and Gray Granite ink I brushed in an upward stroke over the negative die space. Darker on the bottom and lighter as I stroked upward.
I colored over the bottom of the Basic White layer below the tree shadow reflections with a blending brush and Azure Afternoon ink for the water – because there is already color there the blue will color over but not completely mask the color so it looks like the water is reflecting the color in the sky! I placed more blue color closer to the tree line and less at the bottom of the layer.
Using a water painter and a drop of Craft White ink refill I lightly brushed side to side with the brush to streak the water with white lines and then went over the center area with a Wink of Stella glitter pen for a little sparkle!
I stamped the sentiments in Gorgeous Grape ink at the top of the layer.
Adhere the tree die just above the reflection shadow and cut off the overhang.
Adhere the colored layer onto the Gorgeous Grape card base.
I added three of the purple hued Frosted Iridescent Dots from the Lights of Aurora Suite Collection around the sentiment to finish off this stunning card with coordinating sparkle!

The first card that I did with this technique I tried Crushed Curry at the bottom inside of mirroring the colors and it took on a brighter tone like it captured the moments before the sun goes down! Two different looks just by experimenting with the colors used on the background! Try this technique and let me know what you create – one stamp at a time!

Happy Stampin’
Natalie

Product List
Lights Of Aurora Suite Collection (English) [ 165768 ]
[165768]
$81.25
Light & Wonder Bundle (English) [ 165763 ]
[165763]
$51.25
Light & Wonder Photopolymer Stamp Set (English) [ 165756 ]
[165756]
$19.00
Basic White 8 1/2" X 11" Cardstock [ 166780 ]
[166780]
$14.00
Basic Black 8-1/2" X 11" Cardstock [ 121045 ]
[121045]
$14.00
Gorgeous Grape 8-1/2" X 11" Cardstock [ 146987 ]
[146987]
$14.00
Azure Afternoon Classic Stampin' Pad [ 161663 ]
[161663]
$9.00
Crushed Curry Classic Stampin' Pad [ 147087 ]
[147087]
$9.00
Gorgeous Grape Classic Stampin' Pad [ 147099 ]
[147099]
$9.00
Gray Granite Classic Stampin' Pad [ 147118 ]
[147118]
$9.00
Poppy Parade Classic Stampin' Pad [ 147050 ]
[147050]
$9.00
Pumpkin Pie Classic Stampin' Pad [ 147086 ]
[147086]
$9.00
Stampin' Glass Mat Studio (Imperial) [ 163987 ]
[163987]
$60.00
Paper Trimmer
[152392]
$28.00
Bone Folder
[102300]
$8.00
Stampin' Seal
[152813]
$8.00
Stampin' Seal+
[149699]
$12.00
Tear & Tape Adhesive
[138995]
$7.00
Multipurpose Liquid Glue
[110755]
$6.00
Mini Glue Dots
[103683]
$7.25
Mini Stampin' Dimensionals
[144108]
$4.25
Stampin' Dimensionals
[104430]
$4.25
Paper Snips
[103579]
$12.00
Blending Brushes [ 153611 ]
[153611]
$15.00
Water Painters [ 168253 ]
[168253]
$13.00
Stampin' Cut & Emboss Machine [ 149653 ]
[149653]
$140.00
Light & Wonder Dies [ 165762 ]
[165762]
$38.00
Clear Wink Of Stella Glitter Brush [ 141897 ]
[141897]
$9.00
Frosted Iridescent Dots [ 165766 ]
[165766]
$9.00
nests of winter front flap fun fold card

nests of winter front flap fun fold card

by | Nov 29, 2024 | card samples, Designer Series Paper, die cutting, fun fold, masculine cards, stamps ink paper, techniques

This is an easy fun fold using the pretty DSP called Nests of Winter DSP and it is a front swing flap tri fold fun fold card!

Follow along to learn how to make this easy WOW fun fold!

Measurements:
BASE: Gray Granite CS: 5 1/2″ x 7 1/4″
scored at 3″ on the long 7 1/4″ side
Attachment Piece: Gray Granite CS: 1 1/2″ x 4″
scored at 1″ on the long 4″ side
DSP: Base piece: 2 3/4″ x 5 1/4″
Front Swing Flap: 3″ square
scrap for focal piece die cut circle
Basic White CS: (2) 3 1/4″ square
4″ x 5 1/4″ inside piece

Cut the BASE piece to 5 1/2″ x 7 1/4″ and score at 3″ on the 7 1/4″ side.
Cut the attachment piece to 1 1/2″ x 4″ and score at 1″ on the long 4″ side.
Adhere the 1″ panel matching the score line to the right hand edge of the BASE card in the center.
Adhere the 4″ x 5 1/4″ piece to the inside of the card base.
Adhere one of the 3 1/4″ Basic White squares to the middle inside of the attachment piece.
Place adhesive on the outside front of the square.
Adhere the other 3 1/4″ square to the opposite side encasing the attachment piece in between the two squares to hide the piece.
Adhere the 2 3/4″ x 5 1/4″ piece of DSP on the front flap of the BASE card.
Stamp in Gray Granite ink the inside sentiment and the pussy willows branches.
Adhere the 3″ square on the front swing flap.
Adhere the DSP circle die from Stylish Shapes die set and pop it up with Stampin’ Dimensionals only in the spots that will not show when the flap is closed.
Stamp the sentiment on a piece of Gray Granite CS in Gray Granite ink. Pop up the sentiment piece below the bird circle.
Place three pearls from the Adhesive -Backed Pearl Trio.

Try this fun fold with DSP you have already and see what a difference that makes. Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Product List
Nests Of Winter Suite Collection (English)
[164072]
$97.75
Winterly Tree Tops Bundle (English)
[164066]
$55.75
Winterly Tree Tops Cling Stamp Set (English)
[164184]
$26.00
Basic White 8 1/2
[159276]
$13.00
Gray Granite 8-1/2
[146983]
$11.50
Nests Of Winter 12
[164183]
$12.50
Gray Granite Classic Stampin' Pad
[147118]
$9.00
Paper Trimmer
[152392]
$28.00
Bone Folder
[102300]
$8.00
Stampin' Seal
[152813]
$8.00
Stampin' Seal+
[149699]
$12.00
Tear & Tape Adhesive
[138995]
$7.00
Multipurpose Liquid Glue
[110755]
$6.00
Mini Stampin' Dimensionals
[144108]
$4.25
Stampin' Dimensionals
[104430]
$4.25
Paper Snips
[103579]
$12.00
Blending Brushes
[153611]
$15.00
Stampin' Spritzer
[126185]
$6.00
Water Painters
[151298]
$13.00
Stampin' Cut & Emboss Machine
[149653]
$130.00
Stylish Shapes Dies
[159183]
$30.00
Adhesive Backed Pearl Trio
[163319]
$7.50
announcing ‘more color mondays’ weekly color challenge

announcing ‘more color mondays’ weekly color challenge

by | May 1, 2023 | card samples, color challenge, sketch challenge, stamps ink paper

Announcing a weekly color challenge! Want/need some card making inspiration – every Sunday morning I will post a color challenge and everyone that posts a card by Sunday evening will get highlighted in my Monday morning post – let’s all play and inspire each other!

I posted the first challenge last week but this will be a recurring theme and would love to get all of your stamping friends involved so spread the word!

Yesterday’s post was a three color challenge using Starry Sky, Gray Granite and Basic White. Sometimes all the inspiration one needs is on the back of the Designer Series paper package! For today’s challenge I went with three of the colors from the gorgeous retiring Sun Prints 12″ x 12″ DSP.

Every Sunday night I will post the colors like the picture below!

I started with a 5 1/2″ x 8 1/2″ card base of Starry Sky.
I adhered a 4 ” x 5 1/4″ piece of Starry Sky and white striped DSP from the Sun Prints DSP (#158790) which was still available when I checked last week and on sale for $12.00!
I added a 3″square piece of DSP in Gray Granite print on a diagonal and added stamped and die cut embellishments from the Nature’s Prints bundle! I added In Color embellishments and this color challenge is complete!
Product List
Sun Prints Suite Collection (English)
[158805]
$76.75
Nature's Prints Bundle (English)
[158801]
$55.75
Nature's Prints Cling Stamp Set (English)
[158793]
$25.00
Starry Sky 8 1/2
[159263]
$9.25
Gray Granite 8-1/2
[146983]
$9.25
Sun Prints 12” X 12” (30.5 X 30.5 Cm) Designer Series Paper
[158790]
$12.00
Basic White 8 1/2
[159276]
$10.25
Gray Granite Classic Stampin' Pad
[147118]
$8.00
Paper Trimmer
[152392]
$25.00
Bone Folder
[102300]
$7.00
Stampin' Seal
[152813]
$8.00
Stampin' Seal+
[149699]
$12.00
Tear & Tape Adhesive
[138995]
$7.00
Multipurpose Liquid Glue
[110755]
$4.00
Paper Snips
[103579]
$11.00
Stampin' Dimensionals
[104430]
$4.25
Stampin' Cut & Emboss Machine
[149653]
$125.00
Natural Prints Dies
[158800]
$37.00
2022 2024 In Color Matte Decorative Dots
[159186]
$8.00