nests of winter tall z fun fold

nests of winter tall z fun fold

Today’s More Color Mondays Color Challenge features Blueberry Bushel, Daffodil Delight and Gray Granite.
Today’s fun fold is called a Tall Z Fun Fold and is an easy way to create a fun card.
The Nests of Winter DSP inspired this installment of the More Color Monday Color Challenge.

Measurements:
BASE: Blueberry Bushel CS: (2) 4 1/4″ x 5 1/2″
Gray Granite CS: (2) 4 1/8″ x 5 3/8″
DSP: (2) 4″ x 5 1/4″ scrap for fussy cut bird
Graceful Greenery Vellum scrap for circle die
Daffodil Delight CS: 3″ x 11″
scored at 2″, 6 1/2″

Adhere the Gray Granite CS layers to the Blueberry Bushel CS layers.
Adhere the DSP pieces to the Gray Granite CS.
Adhere the large panel of the Daffodil Delight CS into a Z fold onto the back DSP panel.
Stamp the sentiment on the inside of the Daffodil layer.
Adhere the top portion of the Daffodil Delight CS layer and place the top DSP layer over the Daffodil Delight layer.
Fussy cut a bird out of the Nests of Winter DSP and adhere to a Graceful Greenery Specialty paper and pop them up on Stampin’ Dimensionals and adhere to the center of the card front.
Adhere the Tinsel Gems Four Pack yellow embellishments to the card front.

Go out and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

nature’s sweetness card in card fun fold

nature’s sweetness card in card fun fold

Blog Post #400 I cannot believe it – hopefully you are enjoying all of the posts! If you have been following me for any length of time you probably have read that I love bright colors! Normally I am not an earth tones warm and fussy girl but this color is fast becoming one of my favorites and it certainly garners the top spot in the neutrals category for me! Pebbled Path is a warm gray brown and goes well with just about anything you match up with it! Today it is the color of choice to pull out of the Nature’s Sweetness Specialty paper for this awesome and easy card in card fun fold!

Measurements:
BASE: Pebbled Path 4 1/4″ x 5 1/2″
Piece 1: Basic White CS 4″ x 8 1/2″
scored at 5 1/4″
Piece 2: Basic White CS 2 1/2″ x 8 1/2″
scored at 4 1/4″
DSP for inside of Piece 1: 3 3/4″ x 5″
DSP for outside of Piece 1: 3 3/4″ x 3″
DSP for both sides of flap for Piece 2:
(2) 2 1/4″ x 4″
Pebbled Path scrap for 2 circle dies
Vellum Scrap for largest circle die

Adhere Piece 1 with the score line to the left on the center of the 4 1/4″ x 5 1/2″ Base piece.
Adhere the 3 3/4″ x 5″ piece of DSP to the inside of Piece 1.
Adhere Piece 2 to the center of the DSP just attached with the score line to the right side and opening to the left. The top flap will lay over the left hand flap of Piece 1.
Adhere the two piece of DSP 2 1/4″ x 4″ to the inside right panel of Piece 2 and the outside of Piece 2. (if there is a direction to your DSP make sure it matches with the way you have set up your card!)
Adhere the 3 3/4″ x 3″ piece of DSP to the outside panel of Piece 1. (if your DSP is directional make sure it matches the direction of your card.
Stamp images and sentiment in Pebbled Path on the circle die cuts from the Everyday Details dies set. Die cut the largest circle from the Everyday Details die set from vellum cardstock.
Adhere them in a pattern that is pleasing to your eye and also will not extend past the score line on the right of Piece 2 so it does not bend the vellum when the card opens.
Adhere to the card only placing tape where the adhesive will not be seen on the vellum and not to extend past the Piece 2 parameters.
Place Adhesive-Backed Milky Dots to the card and you are done!
Such a delightful Fun Fold – try this today with your stamps and go create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Current Hostess code is TA6ANURK remember spend $50 and get a FREE sale-a-bration item and a card kit in the mail from me if you use the hostess code!

weaving a die

weaving a die

This card is a great way to use those strip scraps that you always get from cutting down cardstock and either throw away or if you are like me save for a rainy day because it paper and you can always use paper right? LOL!
the 1/4″ strips that I have in abundance – well cut them in half to 1/8″ strips and weave them through the Dots and Spots die for a fun and different look!

Measurements:
BASE: Basic White CS – 4 1/4″ x 11″
scored at 5 1/2″
1/8″ strips at least 5 1/2″ long
Basic Black CS: Scraps for silhouette Meadows
Die cuts
Berry Burst: 4 1/4″ x 5 1/2″ die cut with the
Dots and Spots die

Using a bone folder bend the paper strips to break the paper fibers and increase the pliability so the strips will be easier to weave through the die.
I started weaving the second strip through the same side and then ripped it back out and decided to strat from the other side and alternate the weaving strips.
Finish the weaving and turn over to the backside and place a strip of adhesive down both sides to bend over the strip ends and fasten them down.
Adhere the weaving to the card front and decorate with the silhouette Black CS dies from the Meadows Die set.

I added a vellum circle die cut from the Stylish Shapes die set and stamped with a sentiment from the Wonderful thoughts stamp set in coordinating Berry Burst ink.

I added a die cut and embellishments to hide the adhesive to afix the vellum circle and this pretty weaved card is complete!

I love this look and hope you try this technique! Now go and create some art of your very own – one stamp at a time!

Happy Stampin’
Natalie

irresistible blooms double sided vellum card

irresistible blooms double sided vellum card

Vellum is such a cool paper to work with, translucent and lovely it can transform a project like no other paper in my opinion!

With this technique we will be stamping on both sides of the vellum to bring depth and dimension to the project.

Measurements:
Base: Basic White 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White Die Layer: 4 1/4″ x 5 1/2″
Vellum Layer 3 3/8″ x 4 3/4″
and another piece 1 3/4″ x 3 3/8″

Using post it notes or post it tape secure the largest two Deckle Rectangle Dies to the Basic White layer and die cut a frame for the card.
This is a great way to secure vellum – since it is translucent one of the downfalls or issues with vellum is how to secure it without seeing the adhesive through the vellum and hiding the adhesive “stains” under the frame is a great way to do it!

On one side of the vellum stamp the leaves from the Irresistible Blooms stamp set in Shaded Spruce ink. Vellum takes longer to dry than regular cardstock so extra drying time is necessary in order to not smear the stamped images. USE CAUTION when handling the stamped side until dry – this usually takes a few minutes.
When dry flip the vellum over and stamp in Gorgeous Grape ink the flower from the Irresistible Blooms stamp set in between the stamped leaf images. Allow drying time.
Place adhesive on the backside of the frame and adhere the vellum to the frame.
Add Mini Stampin’ Dimensionals to the backside of the frame. Remove the release paper and fold the card base in half to prepare to adhere the frame to the card base.
Stamp the smaller vellum piece with a sentiment and leaf image. Allow to dry and add adhesive to the left edge only and add to the left side of the frame. Add 3 Glossy Dots to the card to finish with a little bling!

Stamping on both sides of the vellum creates muted leaves and brighter flowers creating depth and dimension to the stamped scene.

Try this technique and go create some art of your own – one stamp at a time!

Happy Stampin’
Natalie

so much fun playing in the rain

so much fun playing in the rain

t Well the last few days have been raining here – and when it rains it is a perfect time to stamp and get other things done around the house. There was a break in the clouds yesterday and I took a picture across the lake at the reflections on the ice – I am awed by the beauty of this place!

I also had a blast using the new Playing in the Rain Bundle (#150551) and the accessories included in the Rain or Shine Suite Collection! (#160556)

Below are the assortment of cards I made with this suite! Enjoy! And read until the end because next month’s paper pumpkin coordinates with this suite and you can order an add on of two coordinating dies for only $6 if you are a subscriber for this month’s Paper Pumpkin kit (must sign up on the paper pumpkin website or order a subscription of at least one month by Feb 10th) or better yet order the suite collection and a one month subscription and earn Sale-a-bration FREE Level Two  merchandise. See details at the end of this post!

This Rain or Shine suite collection (#160556) is fantastic – I had so much fun playing with it! The Rain or Shine 12 x 12 paper is adorable and has shiny raindrops and clouds – just too cute (#160540), and the loose daisy embellishments are flat and sweet and so easy to add a flair of whimsy to the cards (#160555).
I have ten cards to share with you and one is cuter than the next! Some with stamped images, some with fussy cut animals from the DSP, one with just the papers and a die cut word set from another suite!
This first card detailed in the step by step pictures uses two 3″ x 4″ pieces of the Rain or Shine Specialty DSP, 3/4 of a sheet of Crumb cake cut to 5 1/2″ x 8 1/2″ and one sheet of 4″ x 5 1/4″,one sheet of Basic White 4″ x 5 1/4″ for the inside, scraps of Basic White for the bunny image, the sentiment and the umbrella image.

I colored in the images with a Water Painter (#151298) and Blushing Bride (#147100) and (#147105) Balmy Blue ink pads. I stamped the “Rainy days are better with you” sentiment in Tuxedo Black Memento ink and die cut in the rectangle die from Deckled Rectangles (#159173) Then I shaded the sentiment die piece with a Blending Brush (#153611) and stamped raindrops in Balmy Blue ink.

I used the Raindrops embossing folder (#160554) also part of the Rain or Shine Suite and embossed the 4″x 5 14″ piece of Crumb Cake CS. I popped this layer up on Stampin’ Dimensionals (#104430) and adhered it to the base card.
I added one of the DSP 3″ x 4″ pieces on a tilt to the bottom of the card.
Add the second piece of DSP to the top using an opposite tilt.

I added the Basic White layer for the inside of the card 4″ x 5 1/4″ and I stamped clouds and raindrops in Balmy Blue ink and adhered to the inside of the card.

I fussy cut the bunny image and die cut the umbrella. I adhered the bunny image to the card front using Stampin’ Dimensionals. I adhered the sentiment piece directly to the card above the bunny image.
I used mini Stampin’ Dimensionals and added the umbrella to the bunny’s hand.
I added the pink Pastel Adhesive Backed Sequins (#160387) to finish off the card!

For this card I used the new Textured 12″ x 12″ Shimmer paper cut to 4″ x 5 1/4″, three different patterns of the DSP cut to 1 1/4″ x 3″ and adhered to the center of the Textured Shimmer paper with Tear N Tape (because of the texture). Fussy cut the bunny image from the Specialty DSP and added the Pastel Sequins!

This card uses the same size 3″x 4″ DSP pieces like the first card and added the Daisy Embellishments and the Love For You die cut words (#160403) for a totally different look!

I embossed vellum with the Raindrops embossing folder and then cut the smallest square and the largest circle from the Stylish Shapes die set (#159183 – one of my all time favorite multipurpose die sets!), added a white die for the sentiment from the same die set and fussy cut the daisy and bunny images from the Rain or Shine DSP and adhered those along with the strip of Flirty flamingo striped paper! I finished off the card with some white Opaque Gems (#160412).

This card includes a Mango Melody CS base, strips of Rain or Shine DSP, fussy cut turtle from the DSP, and Opaque Gems.

Another card with Rain or Shine paper scraps and vellum circles from the Stylish Shapes die set. I added the Opaque Gems and some Glittered White Organdy ribbon for some sparkle!
Love this background paper from the Rain or Shine pack on a Flirty Flamingo CS base, and a circle die cut for the sentiment, some daisy embellishments and the fox fussy cut from the DSP!

I love the little closed umbrellas, I stamped around the sentiment in Tuxedo Black Memento ink and colored them in with Stampin’ Blends Alcohol markers in a rainbow pattern! This card is so simple but so cute!!

I stamped the bunny image and umbrella on 4″ x 5 1/4″ Basic white layer and colored with a water painter and ink from the ink pad cases. Added raindrops in Balmy Blue ink and the sentiment in Tuxedo Black. I mounted this onto a Pacific Point card base.

This last card uses the Textures Shimmer Paper which comes in White, Balmy Blue and Shaded Spruce and the pictures do not do it justice –  it is very COOL! A layer of the raindrops paper and the largest square in vellum die cut from the Stylish Shapes die set positioned on the diamond. The Raindrops paper is popped up on dimensionals and the vellum is attached with mini glue dots under the umbrellas. I added the sentiment die cut with a banner from Stylish Shapes. I LOVE THIS CARD! It is simple and elegant in it’s monochromatic style!

Just a reminder it is Sale-a-bration and if you like this set then you might consider ordering the set and the coordinating paper pumpkin! The current hostess code is SWXBZUH9 and all orders during the January sale-a-bration month will receive a chance to win an extra sale-a-bration item!

The Collection (#160556) is $85.25, if you add the one month subscription ($22.50) by Feb 10th you will get the next Paper Pumpkin –  Jump For Joy with the coordinating stamp set and monthly kit (#137858) which contains 9 cards, 3 of 3 designs with special peek-through windows, 9 coordinating envelopes, 1 Mango Melody ink spot and 1 photopolymer stamp set. If you order the Add On die set (#162486) ($6.00) for a total of 113.75 and you will receive (2) Sale-a-bration level one items or (1) Level Two Sale-a-bration item.

One of the things I love about Stampin’ Up! is all of the coordination.
Join in the fun of Playing in the Rain and create some art of your own – one stamp at a time!

Happy Stampin’
Natalie

Product List