hidden flap halloween card

hidden flap halloween card

I am not usually a Halloween-y girl but something about the Spooky Halloween Bundle caught my eye – adorable in it’s design I will use this in all my scrapbooking for my children’s pages that I am catching up on! and cute cards.

Today’s card is a hidden flap fun fold card and all of the easy to follow directions are below! Hope you try this easy fun fold card soon!

Measurements:
BASE: Pumpkin Pie CS: 4 1/4″ x 8 1/4″
scored at 2 3/4″
scrap larger than 2 1/4″ x 3 3/4″ for die cut
Granny Apple Green CS: 2 3/4″ x 8″
scored at 4″
Basic White CS: 2 1/2″ x 3 3/4″
4″ x 5 1/4″
2 1/2″ x 4″
scrap for die cut figure
Basic Black CS: scraps for bat and house dies

Emboss the 4″ x 5 1/4″ and 2 1/2″ x 4″ pieces of Basic White cardstock with the So Swirly embossing folder.

Stamp the “Don’t Worry, Eat Sweets” sentiment on the smallest piece of Basic White CS. (I actually cut this photopolymer stamp in half instead of stamping one half and then the other – they are super easy to cut and piece back together when I want the longer straight saying in the future)

Score the Granny Apple Green layer in half at 4″ and adhere the stamped layer to the inside of this smaller card.

Die cut the smaller Pumpkin Pie layer with the Textured Notes die set and stamp the “No Tricks ALL TREATS” sentiment in Tuxedo Black Memento ink across the top of the piece.

Adhere the So Swirly embossed pieces to the inside and front flap of the card.

Adhere only the top third of the Pumpkin Pie die piece to the middle of the front flap of the card.

Die cut the Haunted House die in Basic Black scrap and two bats.

Adhere the house and one bat flying over the house about 3/4 of an inch from the bottom of the Granny Apple Green front of the smaller card.

Adhere the smaller Granny Apply Green card to the inside So Swirly embossed layer.

Close the card and make sure that the Pumpkin Pie layer is evenly bordered by the Granny Apple Green layer below.

Stamp Happy Halloween sentiment in Pumpkin Pie ink on the inside flap of the card.
When the card front is closed the Granny APple Green card below should be evenly spaced under the Pumpkin Pie die cut on the front flap.
Die cut one of the super sweet “monsters” from this set and color with watercolor pencils and brush with water to blend the pencil color.

Pop up the focal figure on Stampin’ Dimensionals and place on the Pumpkin Pie die cut below the sentiment.

Add the Frosted Iridescent Dots from the upcoming mini catalog release – available next week to the card front and this adorable Halloween card is finished!

This is a simple fun fold card and I hope you try it with your stash soon – now go and create some artwork of your very own one stamp ata time!

Happy Stampin’
Natalie

2025 OnStage fun fold swap cards

2025 OnStage fun fold swap cards

One of the coolest things about going to OnStage Stampin’ Up!’s annual convention is the comraderie that is there and the people you meet – seeing friends you have made online and those you have met before – it is a group of very fun like minded people and I was so sorry it sold out before I got to registration! But last year I met a group out of New York and
Micheal D. hosted a multitude of swaps – I participated in three of them!

These are the fun folds I received! Hope it give you loads of inspiration and ideas!

This first fun fold swap from Mary S. from Wisconsin and features one of my favorite suites – Full of Life Suite – which is currently on the last chance list – so that means WHILE SUPPLIES LAST! Hurry and order if this is on your wish list!
This is a front flap fun fold and uses the full of life DSP and the dies from the set. It also uses the newer Plaster painting 3D embossing folder in Balmy Blue all set on a Blueberry Bushel card base.

This next swap card from Kim P. in Export, PA used the Faith Collection and Unbounded Love Bundles, CHoose Happy and Floral Delight stamp sets and the Grove, Linked Together and Textured Notes dies the bough punch and the Plaster Painting 3D embossing folder. She made a double Z-fold fun fold Easter card for us and did a lovely job.
The next swap card is a gift card slider fun fold and is from Dena R. who is a sideline demonstrator (we are in the same family tree!)
This is a very cool card and lifts the gift card up out of an inner pocket when you open the front flap! She used the Memorable Blooms bundle which is also on the Last Chance list in hues of Peach Pie!
This book binding fun fold card from Dianne G out of Mineral, VA features a pinwheel focal point made out of the Perennial Lavender DSP and has sweet matching decor on the inside.
This next fun fold swap card from Sherry P. features a creative take on an extended z-fold card (like the one I made for this past More Color Monday’s post). She turns the card to a landscape orientation and adds circle dies from the Spotlight on Nature set and stamped with the Delightful Wishes suite of products.
Delightful Wishes was a popular Suite of products and here is another fun fold swap card from Autumn B from Wilmington NC. This is a front flap gate fold card and this fun fold features the Eyelet embossing folder and the Floral Delight DSP.
This DSP fun fold card features a 1/4 sheet of Blueberry Bushel card stock as the base and then a 4″ x 12″ piece of DSP for the card using the Wildflower Birthday DSP from Elaine S.
Lori P from Escondido, CA made this sweet Floral Delight DSP offset gate fold card using the Wildflower Birthday sentiment.
Robyn M from Atlanta, GA made this fun birthday card. This fun fold pulls the doggie in the circle dies out on a separate fold so it peeks through the card opening one minute and out to the side the next! This card uses the One More Year stamp set!
This explosion book binding fun fold card from Robyn B out of Texas used the Meant To Bee bundle for a super sweet card for the one you love!
This triple panel fun fold card from Judy K. in Virginia features the Countryside Inn DSP which is on the Last Chance List and the Cake Celebrations bundle.
This swap card combines two fun folds the Book Binding and Z fold for a unique look with the Lily Pond Lane Last Chance List DSP from Janice A in Texas
Kathy A from San Antonio, TX used a lovely Perennial Lavender DSP decorated belly band to enclose her gate fold explosion card. The Layered Florals embossing folder is on the Last Chance list if you like it – it is on sale!
Diane L’s Fun fold swap card uses the Everyday You and Me suite of products for a double panel z fold card that is stunning! One of my favorite swap cards I received – nice job!
Product List
Paper Snips
[103579]
$12.00
Bough Punch [ 157711 ]
[157711]
$24.00
friends of the ocean h spanner fun fold card

friends of the ocean h spanner fun fold card

Today’s More Color Mondays color challenge screams warm weather in hues of spring grass and sunsets of Melon Mambo, Calypso Coral and Lemon Lime Twist.

I have seen this type of fun fold called many things – front flap fun fold card, front flap H fold, Spanner card etc. whatever you name it this is a winner… easy to replicate and make – it is an easy WOW card!

Pair this fun fold with the Friends of the Ocean Suite of products and well – I am SOOOO ready for spring and summer on the water! LOL!

Measurements:
BASE: Melon Mambo CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, (1) 3/4″ x 5 1/2″
scraps for die cuts
Basic White CS: (4) 1 1/8″ x 4 1/8″
(2) 2 7/8″ x 4 1/8″
scraps for stamping and die cutting
DSP: (4) 1″ x 4″, (1) 2 3/4″ x 4″ and
(1) 5/8″ x 5 1/2″
Lemon Lime Twist CS: scraps for die cuts

Score your base card at 4 1/4″.
Cut the front flap of the card base at 1 1/4″ from each side from the score line to the edge.
This will make a 1 1/4″ flap on each side of the card front.
Adhere the 1″ x 4″ DSP pieces to the Basic White 1 1/8″ x 4 1/8″ cardstock layers.

Adhere two on the outside of the side panels.

Adhere the 2 3/4″ x 4″ DSP piece to the 2 7/8″ x 4 1/8″ Basic White layer and adhere that to the middle outside flap in between the two side panels.
Adhere the other two smaller DSP panels to the inside of the card. These will go on the outside edges leaving 1/8″ border on the top, bottom and outside edge.
Adhere the other 2 7/8″ x 4 1/8″ Basic White layer in between the two smaller DSP layers as shown in the photo below.
Stamp the hello friend sentiment from the Ocean Friends stamp set and the bubbles across the 5/8″ x 5 1/2″ strip.
Mount to the 3/4″ cardstock strip.
Stamp the two step stampin’ crab in Melon Mambo ink – stamping the base in the ink and then stamping off on a scrap piece of paper before stamping on your cardstock – creating a lighter base image.
Stamp the detailed crab full strength in Melon Mambo ink over the base image.
Die cut the crab and adhere to the middle panel.
Die cut the small starfish in Melon Mambo cardstock and adhere around the crab.
Adhere only the ends of the cardstock strip so that the strip is ONLY attached to the side panels of the card front!
Die cut the edging die in Lemon Lime Twist cardstock and some more small starfish.
Adhere under the spanner sentiment careful to only adhere to the side panels (or you will glue this fun fold closed)
Adhere the Lemon Lime Twist starfish to the card front.
Color some small pearls with Melon mambo Stampin’ Blends and adhere to the card front.
I decided I wanted a little more Calypso Coral in the card other than just in the DSP so I stamped a lobster in Calypso and adhered the tail under the spanner and the claw on the right hand side panel.
I stamped another crab on the inside middle panel of the spanner fun fold and the LOVE YOU sentiment above the image to complete the third level of the card!
A spanner card has three little layers, the crab and lobster show up when the card is completely closed but when you lift up the spanner portion of the card you get to see the crab on the middle panel without the lobster and then you pick up the middle panel and get to see the inside of the card!

Try this fun fold with a set you have in your stash! Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

nests of winter front flap fun fold card

nests of winter front flap fun fold card

This is an easy fun fold using the pretty DSP called Nests of Winter DSP and it is a front swing flap tri fold fun fold card!

Follow along to learn how to make this easy WOW fun fold!

Measurements:
BASE: Gray Granite CS: 5 1/2″ x 7 1/4″
scored at 3″ on the long 7 1/4″ side
Attachment Piece: Gray Granite CS: 1 1/2″ x 4″
scored at 1″ on the long 4″ side
DSP: Base piece: 2 3/4″ x 5 1/4″
Front Swing Flap: 3″ square
scrap for focal piece die cut circle
Basic White CS: (2) 3 1/4″ square
4″ x 5 1/4″ inside piece

Cut the BASE piece to 5 1/2″ x 7 1/4″ and score at 3″ on the 7 1/4″ side.
Cut the attachment piece to 1 1/2″ x 4″ and score at 1″ on the long 4″ side.
Adhere the 1″ panel matching the score line to the right hand edge of the BASE card in the center.
Adhere the 4″ x 5 1/4″ piece to the inside of the card base.
Adhere one of the 3 1/4″ Basic White squares to the middle inside of the attachment piece.
Place adhesive on the outside front of the square.
Adhere the other 3 1/4″ square to the opposite side encasing the attachment piece in between the two squares to hide the piece.
Adhere the 2 3/4″ x 5 1/4″ piece of DSP on the front flap of the BASE card.
Stamp in Gray Granite ink the inside sentiment and the pussy willows branches.
Adhere the 3″ square on the front swing flap.
Adhere the DSP circle die from Stylish Shapes die set and pop it up with Stampin’ Dimensionals only in the spots that will not show when the flap is closed.
Stamp the sentiment on a piece of Gray Granite CS in Gray Granite ink. Pop up the sentiment piece below the bird circle.
Place three pearls from the Adhesive -Backed Pearl Trio.

Try this fun fold with DSP you have already and see what a difference that makes. Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

thoughtful journey suite front flap double card fun fold

thoughtful journey suite front flap double card fun fold

I am constantly searching for new card and fun fold ideas to teach and show you! When I came across this one it did not have a name – I am sure someone else probably has a name or two for this design but I could not find one so for my record keeping I named it LOL This fun fold is like two cards in one so I named it the Front Flap Double card fun fold! It’s a mouthful but I did another front flap card this past Friday and I wanted you all to be able to identify them by name.
This card uses the absolutely gorgeous Thoughtful Designs Specialty paper highlighted with shimmer and shine and silver foil it is stunning in person.

Measurements:
BASE: Smoky Slate 4 1/4″ x 5 1/2″
Back card: Petunia pop 5 1/4″ x 8″
scored at 4″
Front Flap: Petunia Pop 3 1/4″ x 4 1/2″
Hinge piece: Petunia Pop 1″ x 5″
scored at 1 1/2″
Thoughtful Designs Specialty DSP 3 3/4″ x 5″
scrap for front decoration 1″ x 3″
Basic White (2) 3″ x 4 1/4″ for both sides of front
flap and scraps for leaf dies
(1) 3 3/4″ x 5″ for inside of back card

Take the hinge piece and adhere the long side to the right-hand center edge of the 1/4 sheet of Smoky Slate BASE.
Score the 5 1/4″ x 8″ Petunia Pop cardstock in half on the long side at 4″. With the opening on the right adhere the back of the card to the center of the Smoky Slate base.
Adhere the Thoughtful Designs Specialty paper to the front side of the “back card” you just adhered to the Smoky Slate.
Bend the hinge piece over the DSP and place the 3 1/4″ x 4 1/2″ Petunia Pop layer on top, center ot in the middle of the back card and mentally not where the layer hits the hinge. you only want to add adhesive to the left side of the hinge making sure to not pass where the layer will be.
Adhere the left-hand part of the hinge piece and adhere the Petunia Pop layer to the hinge.
Adhere one of the Basic White CS layers to the inside of the front flap Petunia Pop layer.
Stamp on the other Basic White layer the small flower stems image across the bottom of that layer in Smoky Slate ink.
Using the Light Petunia Pop Stampin’ Blends marker color in the petals of the flowers.
Color in the leaves in Smoky Slate using both the Light and Dark Blends markers.
Shade the flowers with the Dark Petunia pop Blends marker and then go over it once more with the Light marker to blend.
Adhere the stamped Basic White layer to the outside of the Front Flap.
Stamp in Smoky Slate ink a sentiment over the flower images.
Add a 1″ strip of Thoughtful Designs Specialty paper over the sentiment on the Basic White layer.
I added a Basic White layer to the inside of the Back Card and stamped in Smoky Slate the leaves image from the Thoughtful Wishes stamp set. I also stamped Missing You sentiment on that layer.
I added a small strip of Petunia Pop CS to add color and continuity to this layer.
I added 2024-2026 In Color Shimmer Gems (I had to order more because I have used all of the Petunia Pop gems LOL) to the card’s Front Flap to add a little shimmer!
I had some extra die cuts from last week’s class so I added those for some texture and dimension!

This is a fun card with lots of places to write and decorate! Try it soon! Now go and find some time to create some art of your very own – one stamp at a time!

Happy Stampin’
Natalie