more color mondays – basic beige, pecan pie and golden glow

more color mondays – basic beige, pecan pie and golden glow

Today’s blog post features a fabulous 3D fun fold called the Pop Up Book Fun Fold. The Silly Old Bear Suite – for me and many is a sentimental stroll down memory lane – this suite SOLD OUT during the Demonstrator Pre-order and SOLD OUT again on the first day of Customer Orders. If this is a Suite for you make sure that you use the “notify me” button so when it’s back in stock you will get a notification. This More Color Mondays Color Challenge looks great in shades of brown and gold!

This 3D Pop Up Book Fun Fold is a WOW fun fold and today I will teach you how to make this!

Measurements:
BASE: Basic Beige CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4″ x 5 1/4″, (2) 2 3/8″ x 3″
DSP: 5 1/4″ x 8 1/4″ , with long edge at the top
scored at 4 1/8″
Pecan Pie CS: 4″ x 5 1/4″, (2) 2 1/2″ x 3 1/8″

With the short side of the DSP at the top of the Stampin’ Trimmer and the left edge at the 1″ mark cut from the 1″ mark on the clear ruler to the 7 1/4″.
Repeat this cut with the opposite side placer the opposite short side at the top of the Trimmer and place the edge of the paper at the 1″ mark on the right side of the cutting groove, cut from the 1″ to the 7 1/4″ marks on the clear ruler.

Then with the long side of the DSP at the top of the Trimmer and the left side of the DSP at the 1″ mark – score between the top and bottom cuts.

Then Score at 1 1/2″ in between the top and bottom cuts.

Repeat on the opposite side of the DSP.

With the long side of the DSP at the top of the Trimmer and at 2″ on the side score from the top edge of the DSP to the top cut line and from the bottom cut line down to the bottom edge of the DSP. (Only score above and below the cut lines for this score line)

Then fold the top section Valley-Mountain-Valley
middle score line V-M-V-M-V
and bottom scores V-M-V

Fold and burnish all score lines.

It will look like the photo below.

Fold the DSP and add Stampin’ Seal to the outside U shaped panel and attach to the left hand inside of the Basic Beige card base.
FOld the DSP again and place adhesive on gthe opposite U shaped panels on the other side of the DSP that is not attached to the card yet. Close the back side of the card base and rub on the back side of the card base to secure the DSP to the back inside of the card base.
Take the extra layer of Basic Beige and stamp the images for decoration.
Die cut the images.

Color the stamped images from the Silly Old Bear Suite with Petal Pink, Pecan Pie and Golden Glow Stampin’ Blends.

Take the extra layer of Pecan Pie CS and run it through the Stampin’ Cut and EMboss machine with the Hundred Acre Woods 3D embossing folder.
Adhere the embossed layer to the card front.
Pop up the sentiment die on the center of the card front and add Piglet popped up over the sentiment label.
Stamp the inside sentiment to one of the Basic Beige smaller layers and adhere the two Basic Beige smaller layers to the Pecan Pie layers.

Adhere the stamped and colored figures to the Basic Beige layers and adhere the Pecan Pie to the middle inside panels.

One of my favorite NEW products in the catalog are our NEW IN COLOR SHIMMER BRUSHES! They do not show well in these photos but the shimmer is stunning and I dressed up the stamped images with the Golden Glow Shimmer brush!

I adhered some metallic dots to the card front to finish off this great book fun fold.

Try this fold if you want to really WOW a special someone with you card making skills!

This card post was incomplete yesterday so I rewrote it today with all the photos that did not make the original post – sorry for the technical difficulties!

Now it’s your turn to go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – crushed curry, gorgeous grape and blueberry bushel – scenic coast sneak peak

more color mondays – crushed curry, gorgeous grape and blueberry bushel – scenic coast sneak peak

Well Stampin’ Up!’s done it again just when I think they cannot design more gorgeous papers – they come up with something like this!

It is one of those items that is so much better in person but I made a video which I will share of one of the 6″ x 6″ sheets to show you the shimmer on these pages!

The Scenic Coast Suite is right up my alley – it’s sunsets and water and boats – it cannot get any better for a lake girl like me!

This Easel card fun fold is so easy and makes a stand up display card for this stunning paper!

Measurements:
BASE: Gorgeous Grape CS: 4 1/2″ x 11″
scored at 1 1/2″ and 5 1/2″
Crushed Curry CS: 4″ x 5 1/4″
Blueberry Bushel CS: 1 1/4″ x 4″
DSP: 6″ x 6″ cut for desired part of design to
3 3/4″ x 5″, 1″ x 3 3/4″
Basic White CS: 4″ x 5 1/4″ for inside and scraps
for sentiment die cuts

Cut the DSP to 3 3/4″ x 5″ and mount on the Crushed Curry 4″ x 5 1/4″ layer.
Die cut the large banner from the Stylish Shapes die set from a Basic White scrap and stamp “wherever this note finds you…” in Gorgeous Grape ink and blend the edges with a blending brush and Gorgeous Grape ink for some added color!
Pop up the sentiment with Stampin’ Dimensionals and place in the lower right-hand corner of the layers.
This Suite will be available May 5th to customers and it contains the prettiest sunset colored sequins.

I added three around the sentiment piece to finish off the front of the card.

I took one of the side pieces cut from the 6″ x 6″ DSP and adhered it onto the Blueberry Bushel layer.

I cut a die from the Upcoming Online Exclusive Silly Old Bear Suite of products for the inside sentiment and blended the edges with a blending brush and Gorgeous Grape ink!

I popped up the inside sentiment piece in the center of the DSP/Blueberry Bushel layer.

Score the 4 1/4″ x 11″ at 1 1/2″ and 5 1/2″.

Adhere the Basic White 4″ x 5 1/4″ layer to the inside of the card base.

Then Adhere the Blueberry Bushel layer to the bottom of the Basic White layer.
Bend the 1 1/2″ score line to a mountain fold and then flatten the card base and add Stampin’ Seal + to the scored panel leaving about 1/8″ border.
Adhere the bottom third of the front Crushed Curry DSP layer to the bottom panel leaving an even border on the sides and bottom of the card.

The border around the whole outside of the card should be even (even thought the layer is only attached at the bottom you want to make sure that the layer is straight and even the entire way around.

Because the inside sentiment is popped up it provides a stopper for the easel portion of the card – I actually popped up the inside of the Blueberry Bushel layer so that the easel would rest above that layer so you could see the whole layer! You could use either the sentiment or the layer as a stopper.
Bend the score line inward and place it behind the elevated layer to create the stand up easel!

Viola! It stands independently for display and looks stunning! This is a great card for this paper – hope you try this fun fold with this stunning paper or stuff in your stash! No go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Reminder this is a SNEAK PEAK and the items that will be available on May 5th will not appear on the photo links below.

direct to paper technique – garden poetry suite

direct to paper technique – garden poetry suite

Have you ever done a direct to paper technique?

Try it on one a embossed piece of paper from one of your 3D folders – and make a few try it on the embossed side and the DEBOSSED side – it is amazing the magic that happens when you do this!!

Measurements:
BASE: Shaded Spruce CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: (2) 4″ x 5 1/4″, scrap for the die
Textured Garden Specialty paper: 1″ x 4″

Emboss the Paradise Garden hybrid embossing folder on one of the Basic White CS layers.

Drag your Shaded Spruce ink pad lightly over the surface of the debossed side of the paper.

REMEMBER DRAG LIGHTLY – you can always go over it again to make it darker but you cannot make it lighter.

This is what the debossed side looks like with the direct to paper technique – COOL right?
Adhere the embossed layer to the card front.
Adhere the Textured garden Specialty paper over the middle of the debossed layer.
The sentiment piece is one of the Stylish Shapes circle dies and I am using a SNEAK PEAK Sending Salutations which I got as a Prize Patrol winner from the OnStage 2026 convention!

This is a fabulous sentiment only stamp set which I cannot wait for you to be able to use!
This will be available May 5th when the new catalog goes live!

I stamped the birthday sentiment on full strength in Shaded Spruce ink and then I stamped the leaf image from the Paradise Garden stamp set twice onto my grid paper and then stamped off onto the circle die so it is lighter then the sentiment. I blended the edges with a blending brush and popped the circle up on Stampin’ Dimensionals for some added dimension.

I stamped the Fabulous Sayings “happy birthday” from the former Product of the Month onto the other Basic White layer and stamped the leaf image again on grid paper and stamped it off as a lighter generation onto the right-hand corner of the layer.

Adhere the layer to the inside of the card.

I added Pearlized Faceted Gems which are retired but you could easily substitute the Pearlized Faceted Circles.

This finishes this lovely card with a little sparkle!

Try this direct to paper technique with your favorite 3D embossing folder and make a few to see what the embossed versus debossed sides look like with this technique!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin,
Natalie

Reminder the SNEAK PEAK stamp set will not appear below in the photo links until it goes live for customers on posts after May 5th!

card template #3 sketched butterflies card

card template #3 sketched butterflies card

Last week I made another card using a card template and showed that they can be an easy way to design a card.
On page 22 of the Stampin’ Up! 2024-2025 Annual Catalog we have 22 card templates for making cards! I decided to show you how just changing a few things on the card or the DSP can change the look even though all the cards started out with the same template.
I used card template #3 I have counted left to right on the bottom of page 22 and the third layout from the right is the one I will be using!

Measurements:
BASE: Coastal Cabana CS 5 1/2″ x 8 1/2″
scored at 4 1/4″
scrap for butterfly die cuts
DSP: (3) 1 1/8″ x 4 3/4″
Basic White 3 7/8″ x 5″ and scrap for the die cut

card #2
BASE: Pool Party 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP (3) 1″ x 4 1/8″
Basic White 3 1/2″ x 5″ scrap for sentiment

Card #3
BASE: Pool Party 5 1/2″ x 8 1/2″
scored at 4 1/4″
scrap for sentiment matte
DSP (3) 1″ x 4 1/8″
Basic White 3 1/2″ x 5″ scrap for sentiment

Card #4
BASE: Misty Moonlight 5 1/2″ x 8 1/2″
scored at 4 1/4″ edge torn off front
DSP (3) 1″ x 5″
Basic White 3 1/2″ x 5 1/4″ scrap for sentiment
and strip for inside edge of card

card #5
BASE: Boho Blue 5 1/2″ x 8 1/2″
scored at 2 1/8″ and 4 1/4″ z-fold
scrap for sentiment matte
DSP (3) 1″ x 5″ (1) 3/4″ x 5 1/2″
Basic White 3 1/2″ x 5 1/4″ scrap for sentiment
Petal Pink scrap for leaf die cut

Cut the DSP to 3 strips of 1 1/8″ x 4 3/4″ and die cut the trio of butterflies out of Coastal Cabana card stock from the Sketched Butterflies die set.
Adhere the DSP strips to the Basic White layer.
Adhere the layer to the card front.
Brush Coastal Cabana ink using a Blending Brush onto a small Deckle Circle die cut and stamp the birthday sentiment from the Sketched Butterflies set onto the die. Individually ink up one of the smaller butterflies from the small butterfly cluster and stamp onto the circle die.
Pop up in the center of the sun burst.
Adhere the three Silver Drusy Adhesive-Backed embellishments onto the card to finish it off.
For card #2 take some Thoughtful Journey DSP and cut 3 strips of 1″ x 4 5/8″ and mount onto the Basic White layer.
Mount the DSP/White layer onto the card front.
Die cut a small circle from the Spotlight on Nature die set and stamp “You’re A True blessing” from the Unbounded Love stamp set in Coastal Cabana ink. I used some retired embellishments to finish the card.
For card #3 I cut (3) 1″ x 5″ strips and adhered them onto the Basic White cardstock layer.
I tied a Summer Splash ribbon around that layer and mounted it onto the card front.
I cut Pool Party and Basic White concentric banners from the Nested Essentials die set and stamped the “Hope” from the Unbounded Love stamp set in Coastal Cabana ink. I added a Petal Pink die cut leaf from the Unbounded Love die set and added some retired embellishments to finish off the card!
For the inside of card #3 I added a 3/4″ x 5 1/2″ strip of Thoughtful Journey DSP and stamped the inside sentiment from the Unbounded Love stamp set.
Card #4
Is the same as the last card but I pushed the edge of the Basic White layer to 1/8″ from the left fold and then tore the right hand edge of the card. I added a 1/4″ Basic White strip (which I always have a ton of to add some visual interest to the card.
I stamped a sentiment from the Always With Me stamp set and popped up the Spotlight on Nature die on the lower right hand side of the card front to finish it off!
For my last card sample card #5 I made a Z-fold scoring the Boho Blue cardstock at 2 1/8″ and 4 1/4″.
I adhered 3 strips of 1″ x 5″ Thoughtful Journey DSP to the Basic White layer and adhered it to the first panel careful to only adhere the left hand section of the card to the z-fold.
I added the banners from the Nested Essentials and the Petal Pink leaf die from the unbounded Love set.
I adhered a DSP strip 3/4″ x 5 1/2″ to the inside right edge and stamped the inside greeting. I added retired embellishments to finish this last card!

Using card templates can be a great way to add some different card making skills, add inspiration if you are stuck for some ideas or give you a way to create with friends and see all of the different ways to interpret the card layout given!
Try one today and see what card interpretations you come up with this card layout or one of the other ones on page 22 of the Annual Catalog!
Now go and create a card of your very own – one stamp at a time!

Happy Stampin’
Natalie

This card is a little variation on the sketch using the strips from the Full of Life 6″ x 6″ DSP.
card template #15 sketched butterflies card

card template #15 sketched butterflies card

Using card templates can be an easy way to design a card.
On page 22 of the Stampin’ Up! 2024-2025 Annual Catalog there are 22 card templates for making cards!

Measurements:
BASE: Azure Afternoon CS 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 4″ x 5 1/4″
Basic White 4″ x 5 1/4″ and scrap for the die cut
Basic Black scrap for butterfly die cuts

Cut the 6″ x 6″ DSP piece of paper to 4″ and then to 5 1/4″
Adhere the 3/4″ x 4″ to the bottom of the Basic White layer.
Adhere the Basic White layer to the card inside.
Adhere a Basic Black die cut on the DSP strip.
Adhere the 4″ x 5 1/4″ DSP layer to the card front.
Die cut a large circle from the Spotlight on Nature dies from a scrap of Basic White CS.
Stamp the birthday sentiment in Tuxedo Black Memento ink in the center left hand edge of the circle.
Adhere the circle to the center of the card front.
Adhere the trio of butterflies adhered to the lower right hand edge of the circle.
Adhere the smaller butterfly to the center top of the circle.
Adhere three Drusy Adhesive-Backed embellishments around the sentiment.

Using card templates can be a great way to add some different card making skills, add inspiration if you are stuck for some ideas or give you a way to create with friends and see all of the different ways to interpret the card layout given!
Try one today and see what card interpretations you come up with this card layout or one of the other ones on page 22 of the Annual Catalog!
Now go and create a card of your very own – one stamp at a time!

Happy Stampin’
Natalie