more color mondays – cherry cobbler, basic beige and crumb cake

more color mondays – cherry cobbler, basic beige and crumb cake

Today’s More Color Mondays color challenge is a rich blend of Cherry Cobbler, Basic Beige and Crumb Cake colors for a fabulous Christmas card using Seasons of Elegance Specialty Designer Series Paper scraps!

Measurements:
BASE: Crumb Cake CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 4″ strips in varying widths
Gold Foil: scraps for die cuts
Basic White CS: 4″ x 5 1/4″, scrap for sentiment

Adhere the 4: strips to the card base.
Using the snowflake dies from the Snowflake Kisses die set – cut all three snowflakes from the Gold Foil sheet and adhere the negative foil onto a Basic White 4″ x 5 1/4″ layer and then adhere to the inside of the card base.
Stamp with Versamark ink the “happy winter” sentiment from the Snowflake Kisses stamp set, sprinkle with WOW gold embossing powder and heat set with a Heat Tool on a small banner die from the Stylish Shapes die set.

Adhere to the middle of the card over the Seasons of Elegance Specialty paper strips.

Pop up the snowflake foil die cuts around the sentiment piece.
Add red Traditional Sparkling Sequins around the card.
I added Gold Striped Mesh ribbon around the bottom of the card front and tie in a knot to finish off this card with some elegant sparkle to match the Specialty paper!

This is a super easy card made from scraps what is better than that!

Try making something beautiful from your DSP scraps – now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

card sketch #113 – simple designer series paper card

card sketch #113 – simple designer series paper card

Our Designer Series Paper is the absolute best in the industry – in quality and design! I love our papers and am so proud to work with a company that takes such pride in developing it’s products! This card sketch lends itself perfectly to our pretty papers. The coordinate so beautifully with all the other papers in the entire package so making a card like this is super simple! Just pick out four designs from the pack and get to cutting!

This is card sketch #113! Have fun!

Measurements:
BASE: Old Olive CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, scrap for punch
Basic White CS: 4″ x 5 1/4″
DSP: 4 different designs
2 5/8″ x 3 7/8″, 2 5/8″ x 1, 1″ x 2″
and 1″ x 2 7/8″

Adhere the 2 5/8″ x 3 7/8″ to the left-hand corner of the Basic White layer.
Adhere the 1″ x 2 7/8″ to the right-hand top corner.
Adhere the 1″ x 2″ DSP piece to the lower right-hand corner.
Adhere the 1″ x 2 5/8″ to the bottom left-hand corner.
Punch out the Heartfelt Hexagon punch on a scrap of Old Olive cardstock and stamp the “Bright & Happy CHRISTMAS WISHES” sentiment from the Jolly Holly stamp set in Old Olive ink and then add Old Olive ink to the outside edges of the punch with a blending brush.
Pop up the punch image on the layer front – I placed mine at the intersection of the four different DSP designs.
Adhere this layer to the Old Olive card base.
Adhere three green Traditional Sparkling Sequins to the card front around the punch and you have completed the easiest Christmas card yet!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

winter meadow easel card

winter meadow easel card

Well, I don’t usually highlight retired products and i pulled the Winter Meadow DSP out and started designing this card and totally forgot it is retired. OOPS! but the card is so pretty I had to show you the finished result!

It is still a good teaching moment – I will teach you how to make an easel 3D fun fold card and you can try it with your stash of DSP – retired or current!

Measurements:
BASE: Basic Grey CS: 5 1/2″ x 8 1/2″
scored at 1 1/4″ and 3″
Secret Sea CS: 4″ x 5 1/4″, 3/4″x 5 1/4″
Basic White CS: 4″ x 5 1/4″, scrap for the die
DSP: 3 3/4″ x 5″, 1/2″ x 5″

Adhere the 1/2″ x 5″ DSP piece to the Secret Sea matte 3/4″ x 5 1/4″, then adhere Foam Adhesive strips to the back.
Adhere the large DSP layer to the 4″ x 5 1/4″ Secret Sea matte.
Score the card base at 1 1/4″ and 3″ on the long side.

Adhere the 4″ x 5 1/4″ Basic White layer to the inside of the card and then pop up the small DSP matte to the bottom of the Basic White layer.

Place adhesive on the outside edge of the small panel.
Die cut the small sentiment piece from the Snowflake Kisses bundle and stamp “let it snow” in Secret Sea ink. Pop it up on the DSP.

Adhere the large DSP matte to the front panel.

Adhere three Secret Sea 2025-2027 In Color Flat Pearls to the outside of the easel around the sentiment.
The front panel tucks into the raised smaller DSP piece to stand up for an easel effect hence the fun fold name!
This is a side view of the card!
Have a pretty piece of DSP or artwork that you would like to display then try this easel card fun fold and do just that!

Now go and create some artwork of your very own that you would like to display – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – misty moonlight, secret sea and cloud cover

more color mondays – misty moonlight, secret sea and cloud cover

Today’s More Color Monday’s color challenge features the Peaceful Garden Suite Collection of products highlighting the Misty Moonlight, Secret Sea and Cloud Cover blue tones.

I will also be teaching you the layering circles technique which is a cool layering technique!

Measurements:
BASE: Misty Moonlight CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Secret Sea CS: 4″ x 5 1/4″
Cloud Cover CS: 3 3/4″ x 5″
Peaceful Garden DSP: pick three designs for
die cutting
Peaceful garden Glimmer Paper: for die cuts
Basic White CS: 4″ x 5 1/4″, 1/2″ strip for
sentiment

I used the Spotlight on Nature nested circles die set and choose the second, third, fourth and fifth circles from the largest.

DSP design #1 cut one each from the smallest and largest circle die.
Glimmer Paper: cut one each from the third and fourth circle sizes.
DSP design #2 cut one each from the third and fourth circle sizes.
DSP #3 cut one each from the smallest and largest circle die.

Lay them out so that the top row the design #1 smallest circle starts the row and next is Glimmer Paper second smallest then DSP #2 second largest circle and last in the top row is DSP #3 largest circle.

On bottom row DSP #1 largest circle, then Glimmer Paper second largest circle then DSP #2 second smallest and lastly DSP #3 smallest circle.

Starting with the bottom row adhere the second largest circle to the largest circle move the Glimmer Paper circle so that the curves of the circle on the left side line up.
Adhere the next circle on top of the Glimmer Paper this will be DSP #2 or the second smallest circle and then adhere the smallest circle on top of the entire stack matching up the left curve of the circles.
Start on the top row with the largest circle on the bottom and adhere the second largest circle so that the right-hand side of the curve of the circles line up.
Adhere the second smallest circle which will be the Glimmer paper on top of the first two circles matching up the right sided curve of the circles.
Then adhere the smallest circle on top of the Glimmer Paper circle.
This is how they will look completely adhered.
Cut both circle bunches in half.
Swap the bottom halves of the circles and slide the pieces until the papers match up and look like they are swirling into one another.
Emboss the Cloud Cover layer in the Peaceful Greenery embossing folder and adhere to the Secret Sea layer and then adhere those two layers onto the Misty Moonlight card base.
Place the two pieces of the layering circles on the card base and place then so they are equidistant from the edges of the card. Adhere the bottom part of the circles to the card base.
Using a Basic White 1/2″ strip, stamp in Secret Sea ink the Peace, Love & Joy from the Peace on Earth stamp set.

If you slide the end of the strip into the punch you can cut one side at a time and therefore make the banner any size you wish! Place one end of the strip into the Banner Sayings punch and cut one end of the strip into a banner edge.

Place the other end of the strip through the other end and lift up the banner cut edge above the punch so that you only cut the remaining side!
Glue the top half of the layering circles above the bottom circle offset so that the matching DSP lines up.

Pop up the sentiment strip and place over the entire length of the layering circles.

One o fthe things I love about these Traditional Sparkling Sequins is that you can color them with our Stampin’ Blends markers! I used the dark Azure Afternoon Stampin’ Blends marker as well as the Misty Moonlight Stampin’ Blends markers to color the blue sequins and added it to the card around the sentiment piece.
I wanted to add a dove on the right hand side but the dove faces the other way so I cut the dove upside down on the Secret Sea Glimmer paper so that it would face the opposite way!

I popped it up on Stampin’ Dimesionals and placed it as if it was sitting on the right-hand side of the sentiment strip to finish off the card!

This is a stunning card and although it requires a little extra die cutting and adhering the layers together it is not difficult to do and the effect is well worth it!

Try this layering circles technique with your stash and let me know how it turns out!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

seasons of elegance pleated card

seasons of elegance pleated card

This pleated card looks so impressive and is so easy it’s all about the folding and adhering – easy peasy! Let me show you how to make this show stopper Christmas card!

Measurements:
BASE: Cherry Cobbler CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 4″ x 9 3/4″ scored at 1/4″, 1/2″, 1 1/4″,
1 1/2″, 2 1/4″, 2 1/2″, 3 1/4″, 3 1/2″, 4 1/4″,
4 1/2″, 5 1/4″, 5 1/2″, 6 1/4″, 6 1/2″, 7 1/4″,
7 1/2″, 8 1/4″, 8 1/2″, 9 1/4″ and 9 1/2″
DSP: in a complimentary color: 1″ x 5 1/2″
Basic White CS: 4″ x 5 1/4″ for inside

Cut the DSP to 4″ x 9 3/4″
Then score at 1/4″, 1/2″, 1 1/4″,
1 1/2″, 2 1/4″, 2 1/2″, 3 1/4″, 3 1/2″, 4 1/4″,
4 1/2″, 5 1/4″, 5 1/2″, 6 1/4″, 6 1/2″, 7 1/4″,
7 1/2″, 8 1/4″, 8 1/2″, 9 1/4″ and 9 1/2″

Start with three mountain folds and then 2 valley, then continue with 2 mountain and 2 valleys until the end and you will have 3 mountain folds for the last three folds.

I modified the original design I found online and added a 1/4″ fold on both ends so you would have a fold back portion to secure the pleats to the card base.
This next step is the hardest and it’s really about dexterity LOL – you need to fold the pleats inward and hold them at their closest while adhering Tear-n-Tape to the back side.

This will curl – do not be alarmed that is natural because of the pleating.

Once you remove the release paper from the Tear-n-Tape and attach the pleated paper to the Card base this will eliminate the curling.

Remove the release paper from both Tear-n-Tape strips and adhere to the card base.

I heat embossed the sentiment from the Jolly Holly stamp set in Gold embossing powder with a Heat Tool and adhered the DSP embossed strip to the two end pleats.

Cut away any excess – I made that 5 1/2″ long because the pleated size will vary so you will have excess.

I added the gold colored sequins from the Traditional Sparkling Sequins -these are my new favorite holiday embellishment – you can use them as is or you can color the lighter ones with Stampin’ Blends markers – they are so sparkly and versatile!

This easy WOW card is a fabulous design – try it today with your stash of DSP and let me know how it turns out!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie