more color mondays – blueberrybushel, strawberry slush and highland heather

more color mondays – blueberrybushel, strawberry slush and highland heather

Today’s post combines two challenges: More color Mondays color challenge and a sketch challenge!

The Waterside Retreat Suite of products for perfect for this challenge for a sweet and easy summer-y card!

Measurements:
BASE: Blueberry Bushel CS: 5 1/2″ x 8 1/2″,
scraps for dies
Strawberry Slush CS: scraps for dies
Highland Heather CS: scraps for dies
DSP: 3″ x 5 1/2″
Basic White CS: (2) 1/2″ x 5 1/2″, 4″ x 5 1/4″,
scrap for sentiment die

Tear one edge of the 1/2″ x 5 1/2″ strips and adhere to the long sides of the DSP.

Die cut the chairs pieces in each color.

Adhere the two chair pieces together in each color.
Adhere the DSP piece to the middle of the card front.

Adhere the Blueberry Bushel CS chair to the DSP.

Adhere the Highland Heather chair to the right-hand side of the DSP piece on the card front.
Adhere the Strawberry Slush chair in between the two other chairs.
Stamp the Relax sentiment in Basic Black Hybrid Ink and die cut the smaller wide banner from the Stylish Shapes die set.

Pop up the die onto Stampin’ Dimensionals and add to the right-hand side below the highland Heather chair.

Adhere three Blueberry Bushel embellishments from the Strawberries and Dots embellishment kit and your cute summery card is complete!

Try making a card with a repetitive stamp or die as I used from the Card Sketch #126 each of the panels I substituted with the chair dies. You could take those panels and use DSP or colored cardstock or use a repeating stamp… the possibilities are endless!

Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’,
Natalie

fern & flora torn edge card – card sketch #125

fern & flora torn edge card – card sketch #125

Today’s new card sketch is a fun one and this is the card I designed with it – let me see what you can do with it!

Measurements:

BASE:Secret Sea CS: 5 1/2″ x 8 1/2″
DSP: 2″ x 5 1/4″
Basic White CS: 1/2″ x 5 1/4″ strip, 3″ x 5 1/4″,
scraps for dies
Old Olive CS: scrap for die
Mossy Meadow CS: scrap for die
Berry Burst CS: scraps for dies

Take the 3″ x 5 1/4″ layer and emboss in the Fern and Flora 3D Embossing folder.

Attach to the right-hand side of the Secret Sea card front leaving an even border on the top, bottom and right side.

Tear the DSP in half and flip one side over.
Tear the edge off of the Basic White strip, adhere one side of the DSP to the left of the embossed layer then the Basic White strip and then the other side of the dsp leaving the same size even border on the top, bottom and left hand side.
Die cut the ferns in Old Olive scrap and Mossy Meadow scrap, die cut the flower sections and the moth in Berry Burst scraps.
Start to adhere the ferns over the embossed section.
Adhere the Old Olive lacey fern over the Mossy Meadow larger fern.
Adhere the Berry Burst flower sections together and glue the White flower centers in the middle of the flower pieces.
Stamp the sentiment in Berry Burst ink onto the sentiment die and blend Berry Burst ink over the surface of the die.

Pop up the sentiment piece over the bottoms of the fern dies and adhere the flowers diagonally onto the sentiment piece.

Pop up the die cut moth over the fern die cuts.

I placed the smaller flower die in the ferns and three Mossy Meadow embellishments around the sentiment from the Natural Matte Dots.

What a fun layered card using this easy card sketch – what will you make from this sketch? Let me know! Now it’s your turn go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

card sketch #122

card sketch #122

I love card sketches!

This one is so versatile! Card Sketch #122 is the next card sketch in our series. I have turned the sketch on it’s side for a little variety. I turned this one into a fun fold.

Measurements:
BASE: Strawberry Slush 5 1/2″ x 8 1/4″
scored at 1″ and 4 1/4″
Basic White CS: 4″ x 5 1/4″, scrap for punch and
die, 1/2″ x 5 1/2″ strip
Vellum: 3/4″ x 5 1/2″

Adhere the 4″ x 5 1/4″ Basic White layer into the inside of the card base.

Fold back the 1″ panel on the card front.

Adhere the vellum to the upturned panel.
Adhere the 1/2″ strip under the panel and then adhere the panel down.
Punch the Rounded Rectangle punch out of a scrap of Basic White CS.

Stamp the “thank you” from the Scalloped Blooms Bundle in the Black Hybrid ink pad. Blend the edges with a blending brush and Strawberry Slush ink. Pop up on Stampin’ Dimensionals.

Die cut the large leaf die from the Nature’s Symphony die set from a Basic White scrap.

Adhere to the front of the card over the vellum panel.

Pop up the sentiment over the leaf die.

Add some In Color Flat Pearls to finish off this easy lovely Sketch card.

Try turning a sketch on it’s side or change the dimensions of the elements – the possibilities are endless! Now it’s your turn to create some artwork – one stamp at a time!

Happy Stampin’
Natalie

card sketch #119 – 4 cards from one 6″ x 6″ DSP

card sketch #119 – 4 cards from one 6″ x 6″ DSP

This card sketch inspired 4 cards from this one sheet of gorgeous Thoughtful Journey DSP this was a carryover product last year and I do not anticipate that it will be carried over again so If you love watercolor landscaped images get this paper before it is gone!

Card sketch #119. is here and what will you do with it – so many possibilities!

Measurements:
BASE: Basic White CS: (2) pieces of 8 1/2″ x 11″
Score one at 4 1/4″ and then cut on the 11″
side at 5 1/2″, score the other at 5 1/2″ and
then cut at 4 1/4″
(4) 3 1/4″ squares, scraps for sentiments
DSP: (1) 6″ x 6″ sheet cut into (4) 3″ squares
then cut each 3″ square into (3) 1″ strips
Mossy Meadow CS: (4) 3 1/2″ squares

Emboss each of the card fronts of the card bases in the Birch Wood 3D embossing folder.

Cut each of the 3″ squares into 1″ strips, keeping in order adhere them to the 3 1/4″ Basic White squares.
Adhere each of the 3 1/4″ white squares to the 3 1/2″ Mossy Meadow CS squares.
Adhere the first square to the center of one of the embossed card fronts.
Stamp a sentiment from the Wonderful Thoughts Bundle and then die cut around the words. Adhere to the card front over the DSP.
Do the same for the rest of the cards! I added a few left over die cuts from a previous card from the Springtime Scenes die set on the last card!
two different card orientations but basically the same sketch!
Adhere three Natural Matte Dots to finish off the card with some coordinating embellishments. These gender neutral cards are perfect for ANY occasion just by changing the sentiment and the Wonderful Thoughts bundle is a great all sentiment set.

Check these items out before they leave!
Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – bubble bath, pretty in pink and pool party

more color mondays – bubble bath, pretty in pink and pool party

Today’s More Color Monday is also a repeat card sketch back on February 18th I posted a blog post about card sketch #118 -= it is such a fun and easy way to make a card I thought I would show you another version with a totally different Designer Series Paper to show you just how versatile a sketch can be! This sketch is super awesome because it allows you to stretch you DSP by using 3″ and 4″ squares! No WASTE!!

Measurements:
BASE: Pool Party CS: 4 1/4″ x 11″
scored at 5 1/2″
DSP: 4″ square, 3″ square
Bubble Bath CS: 3 1/4″ square, 5/8″ x 2 1/8″
Pretty in Pink CS: 7/8″ x 2 5/8″
Basic Black CS: scrap

Adhere the 4″ square of DSP to the top of the card front.

Adhere the 3″ DSP square to the Bubble Bath matte.

Stamp the sentiment Celebrate to the small Bubble Bath CS layer in Tuxedo Black Memento ink.
Mount onto a piece of scrap Pretty In Pink CS and cut to 1/8″ border on the bottom.
Leave about 1/4″ on the right-hand edge for the punch.
Using the Happy Labels Pick a Punch on the Ticket stub side – punch the right-hand edge of the sentiment piece to make it look like a ticket stub edging.
Stamp Happy Birthday from the Boardwalk Fun stamp set in Tuxedo Black Memento ink in the center of the inside of the card.

Die cut a palm tree from the Boardwalk Fun dies in Basic Black CS and adhere to the bottom right-hand corner of the inside of the card.

Adhere the 3 1/4″ matted DSP square to the lower center of the 4″ DSP square on the card front.
Pop up the sentiment over the DSP on the card front.
I place three Frosted Irridescent Dots (which are a retired product but I will put an alternative active product in the photo links below for your buying pleasure! LOL) onto the card to finish off this fun and easy card sketch birthday card!

Try this sketch today with some of your DSP stock and let me know how it turns out!
Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie