graceful evergreen deer hot foil card

graceful evergreen deer hot foil card

The Graceful Evergreen Deer Hot Foil Bundle caught my eye during the pre-release and I just knew it would make beautiful and elegant Christmas cards! I combined it with Silver and Red foil and the Magical Christmas Hot Foil dies and created this easy Christmas card!

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, scraps for hot foiling

Let me take you through the Hot Foil System Instructions first.

Plug in the machine and press the White Button – the platform takes a while to heat up – so be patient and wait for the first beep!

When the platform beeps press the white button and play the hot foil dies on the platform.
The platform will beep a last time and the lights will all be lit – when the green light is on you are ready!

Place the foil cut off the rolls sized enough to cover the dies shiny side down over the dies.

Then add the paper over the foil.

Then cover with the Hot Foil Shim and the Hot Foil Spacer in that order.

Unplug the system and roll through the Stampin’ Cut and Emboss machine VERY SLOWLY. You want ample time for the foil to contact with the paper and transfer!
Remove from the machine I roll through forwards and backwards and then remove the foil from the paper and die cut your beautiful deer out using the Stampin’ Cut and Emboss machine with the BASE plate #1, the Small die adaptor p[late #2 and sandwich the paper and the cutting dies inbetween 2 Cutting Plates #3s.

I also placed the Shining Stars smallest star dies on the paper after cutting the deer for absolutely NO FOIL went to waste!

I also plugged the Hot Foil System back in and redid the steps with the reverse Hot Foil Plate. Because this is such a large plate to heat up I deviate from the original instructions here and place the Reverse Hot Foil Plate on the platform immediately after plugging it in to give it extra time to heat up all that metal!
When the platform beeps press the white button and the yellow button will start blinking allow this extra time to heat up the die.

Press the white button after the second beep and the lights will all be on red-yellow and green and start to build your sandwich, Foil shiny side down, cardstock, shim and spacer!

Now I had plenty of Hot Foil Dies to build my Christmas cards both the regular and reverse images! Regular images photographed on the left and reverse images are on the right side!
Now to build an easy Christmas card background for my hot foil dies to shine!

I used the stamps from this bundle and made two masks by stamping directly on my grid paper and cutting them out close to the stamped images.

I stamped two smaller trees in Granny Apple Green ink on the card front.
Covered one of the trees with a mask.
I stamped the larger trees in Shaded Spruce ink both full strength and stamping off to create some color variation and depth.
I added my word Hot Foil Dies from the Magical Christmas Hot Foil Dies.
Added red foil stars from the Magical Christmas Hot Foil dies and Shining Stars dies.
Added the gorgeous deer die.
And finished the card off with the awesome Christmas embellishments Real Red and White Adhesive-backed Peppermints!

Such a fun Christmas card and the Hot Foil dies make it so elegant!

Try your hand at making some Christmas cards out of your stash today – one stamp at a time!

Happy Stampin’
Natalie

christmas (fun fold) in july

christmas (fun fold) in july

It’s Christmas in July – and here is a Double Flap fun fold card featuring the adorable Woodland Wishes stamp set.

I love coloring – as a child I had loads of coloring books and I continued to love it as an adult – our Stampin’ Blends alcohol markers and so fun to color with – whether just straight coloring between the lines or fancier blending and shading – they can do it all! I made this card for this month’s Christmas and Holiday Demonstrator’s swap and I colored in all the animals in this set and had so much fun doing all the coloring for these cards!

Measurements:
BASE: Poppy Parade CS: 4 1/4″ x 11″, 2 3/4″ x
5 1/2″, large scrap for circle die, 3/4″ x 5 1/4″
Crumb Cake CS: 2 3/4″ x 5 1/2″
DSP: 2″ x 5 1/4″
Basic White CS: 2 1/2″ x 5 1/4″, 4″ x 5 1/4″, scrap
for circle die, 1/2″ x 4″, scraps for animal
stamps

Score the base card at 5 1/2″ and fold. Cut 2 3/4″ off the left side of the fold line.
Stamp the Woodland Wishes “animal” Christmas Tree in Hybrid Black ink and cut to 2 1/2″ x 5 1/4″ if not already that size.
Score the 2 3/4″ x 5 1/2″ piece of Crumb Cake CS at 1/4″.

Cut a piece of DSP to 2 1/2″ x 5″.

Adhere the DSP to the large panel.

Adhere the 1/4″ tab to the center back of the short side of the 4″ x 5 1/4″ Basic White piece.

Put Stampin’ Seal around the back of the 4″ x 5 1/4″ layer including the 1/4″ tab.

Adhere the DSP to the Crumb Cake cardstock if not done already.
Adhere the Basic White layer to the inside panel of the card base.
Stamp the inside sentiment in Poppy Parade ink and the little hedgehog image in Crumb Cake ink to the left side of the sentiment on the 4″ x 5 1/4″ Basic White layer.
Stamp the outside sentiment in Hybrid Black ink on the Basic White strip.

Adhere to the Poppy Parade strip and cut into banner edges on either side.

Die cut a large circle from the Spotlight on Nature dies in Poppy Parade CS and then next one down in Basic White CS.

Splatter the Basic White circle with a Water Painter and the Poppy Parade ink.

Adhere the Basic White circle to the Poppy Parade circle and then adhere the strip sentiment to the circles.

Color the animals on the Christmas tree image with your choice of Stampin’ Blends.

I colored the cardinal and the Christmas bulbs in Real Red, Pecan Pie for the bear, Smoky Slate for the squirrel, Crumb Cake for the doves in light and reindeer in dark, fox in Cajun Craze, owl and stars in Golden Glow, greenery in Granny Apple Green and asterick in Balmy Blue.

Adhere the tree image to the outside panel of the card base.
Flip the Crumb Cake flap over the Poppy Parade flap.
Adhere the sentiment circle dies to the Crumb Cake flap.
I colored and fussy cut one bear, one fox and one deer for around the outside flap and sentiment circles.

Adhere these animals around the sentiment.

Adhere some Natural Matte Dots to the finished card and you have a great Christmas fun fold.

Now it’s your turn to make a Christmas card to celebrate Christmas in July or to start planning the cards and supplies you are going to need for this Fall to start making your Christmas cards to send to all those special people.

Now it’s your turn to create some Christmas artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

snowflake kisses die cut out card

snowflake kisses die cut out card

This card is a quick and easy Christmas card idea using the cut through corner snowflake die from the Snowflake Kisses Bundle. Cut through dies actually cut an image out of the cardstock leaving the cardstock intact and complete with the dies cut out of them. It’s a cool look!

Measurements:
BASE: Blueberry Bushel CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″

Yep – that’s it like I said an quick and easy card!

Take the Basic White CS layer and cut the corner snowflake die in two diagonally opposite corners – it will look like this!

Save the die cut snowflakes for the inside of the card!

Use a piece of scrap paper or a piece of cardboard as a mask/edge and apply Blueberry Bushel ink with a blending brush on that outside corners that have the die cuts in them.
Replace the edging mask on the opposite side and blend the ink on that corner.
Remove the mask and this is what you will end up with.
I stamped the “let it snow” sentiment from the Snowflake Kisses stamp set in Blueberry Bushel ink diagonally down the inbetween white space!
I adhered the die cut snowflake pieces to the inside of the card.

If I had to do it over again I would adhere a second Basic White 4″ x 5 1/4″ piece on the inside because of the darker colored cardstock and then adhere the snowflake pieces for a tone on tone effect!

Adhere the die cut and blended layer to the card base and adhere the blue Traditional Sparkling Sequins to the front to finish this super quick and easy card!

Now go and create some artwork of your very own and start collecting your Christmas cards to send to family and friends – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – misty moonlight, secret sea and crumb cake

more color mondays – misty moonlight, secret sea and crumb cake

OOHHH!! I love the way this More Color Monday challenge card turned out! Beautiful strong masculine colors with fabulous Glimmer sparkle!

Measurements:
BASE: Crumb Cake CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4″ x 5 1/4″
Misty Moonlight CS: 2″ x 5 1/2″
Secret Sea CS: 3 3/4″ x 4 1/4″
Peaceful Garden Glimmer Paper: 1 3/4″ x 4″,
scrap for the stars
Basic White CS: scrap for die cut

Die cut the larger trees in the Secret Sea CS layer and the smaller trees out of the Misty Moonlight layer.

Place them on top of each other and adhere together.

Emboss the Crumb Cake layer in the Distressed Tile 3D embossing folder.
Place the die cut strips on the embossed layer and cut off the excess on the Misty Moonlight layer. Adhere the small Misty Moonlight pieces cut off on the outside under and slightly above the Secret Sea layer.
Adhere the die cuts to the embossing layer and adhere to the base card.
Adhere the Glimmer Paper layer to the bottom of the card slightly overlapping the tree die cut layer.
Color the light blue Traditional Sparkling Sequins with the brush tip of the Misty Moonlight Stampin’ Blends.
Cut the larger sentiment die cut from the Peaceful Gardens die set and stamp the sentiment from the Light & Wonder stamp set in Secret Sea ink. Adhere to the bottom of the card over the Glimmer layer and the bottom of the tree die cuts.

Place the colored sequins around the sentiment.

I finished the card by die cutting the triple star die in the Secret Sea Glimmer Paper – this Glimmer paper is so pretty and by placing the three stars in the sky above the trees there is sparkles on the bottom as well as the top of the card! It balances it out!

If you do not have some of our Glimmer paper it is one of those great accessories as far as paper goes – a little goes a long way to make your cards next level!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

jolly holly cut out card

jolly holly cut out card

Did you know that the Jolly Holly Online Exclusives bundle contains a hybrid embossing folder that does a PARTIAL die cut on the holly background! This is such a cool technique – you can gently bend the holly leaves up to give the card front extra depth and dimension or tuck a sentiment card in between the holly leaves like I did on this card!

Measurements:
BASE: Cherry Cobbler CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, scrap for the word die
Garden Green CS: 4″ x 5 1/4″
Basic White CS: 4″ x 5 1/4″, scrap for the sentiment matte and the holly dies

Hybrid emboss and die cut the Jolly Holly leaves on the Garden Green CS layer.
Stamp two holly clusters in Garden Green ink. Using a Blender Pen pull the green ink inward to color the holly leaves. Using a Cherry Cobbler dark Stampin’ Blends marker color the berries in the holly clusters.

Die cut the White sentiment rectangle from the Jolly Holly die set, two holly leaf bundles and the word joy from the Cheery Cobbler CS.

Pop up the embossed background on Stampin’ Dimensionals onto the Cherry Cobbler card base.

Tuck the white sentiment rectangular die cut into the partially cut holly leaf background. Adhere with a little dab of Multipurpose Glue on the back of the sentiment rectangle and under the holly leaves that go over the rectangle.

Glue the Joy die to the sentiment matte and pop up the colored holly leaf beside the word.

Adhere the 4″ x 5 1/4″ Basic White CS layer to the inside of the card.

I saved the 1/8″ strip I cut from the Garden Green CS and adhered it to the White layer.

Adhere the other colored holly leaf onto the Garden Green strip.

I adhered three red Traditional Sparkling Sequins around the sentiment to finish off this easy and fun Christmas card!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie