card sketch #114 – hope, love & joy card

card sketch #114 – hope, love & joy card

Today’s card uses a simple card sketch and is a very simple Designer Series Paper card – super easy to put together and CASE!

Measurements:
BASE: Blueberry Bushel CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″ and scrap for
sentiment and die
DSP: 4″ x 5 1/4″

I am going to spend my time explaining a tip and trick for getting a die centered correctly.
I actually wanted to use a different circle die than the one that came with the Hope, Love & Joy Bundle because I wanted to use the small circle from the Spotlight on Nature dies with the lined edges – I imagined it would look like the lines were radiating out from the earth so I wanted to try this circle rather than the one in the coordinating die set!

Because it is not coordinating a slightly bigger I wanted to show you the steps I took to center the image with this die.

Place the desired die on a scrap piece of Basic White CS and trace around the outside with a pencil.

Stamp in Tuxedo Black Memento ink the desired image in the center of the penciled circle.
Color the water areas of the Earth with Balmy Blue light Stampin’ Blends then outline with Blueberry Bushel Light then go over the entire water are with the Balmy Blue Light again to blend the alcohol markers.

Color the land areas with Crumb Cake Light first then outline the area with the Dark Stampin’ Blends marker then blend the entire land area with the Light marker.

I used a scrap of Basic White to stamp the outside sentiment from the scrapbooking set Exploring Nature in Blueberry Bushel ink and fussy cut around the letters then blended the edges with a blending brush and Blueberry Bushel ink.

I die cut the Earth.

I stamped the inside layer with the “stay wild & free from the Exploring Nature set and adhered it to the inside of the card base.

Adhere the DSP layer to the card front then I adhered the fussy cut sentiment to the lower third of the card front.
I popped up the Earth die cut above the sentiment and added Basic Rhinestones to finish off this lovely and simple card!

Try this centering technique or my sketch and go and create some art of your very own – one stamp at a time!

Happy Stampin’
Natalie

REMINDER: this is another sneak peak so the photo links below will not reflect the SNEAK PEAK items.
These will be available to customers on January 6th and are available right now to demonstrators and in starter kits!

snowflake kisses die cut out card

snowflake kisses die cut out card

This card is a quick and easy Christmas card idea using the cut through corner snowflake die from the Snowflake Kisses Bundle. Cut through dies actually cut an image out of the cardstock leaving the cardstock intact and complete with the dies cut out of them. It’s a cool look!

Measurements:
BASE: Blueberry Bushel CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″

Yep – that’s it like I said an quick and easy card!

Take the Basic White CS layer and cut the corner snowflake die in two diagonally opposite corners – it will look like this!

Save the die cut snowflakes for the inside of the card!

Use a piece of scrap paper or a piece of cardboard as a mask/edge and apply Blueberry Bushel ink with a blending brush on that outside corners that have the die cuts in them.
Replace the edging mask on the opposite side and blend the ink on that corner.
Remove the mask and this is what you will end up with.
I stamped the “let it snow” sentiment from the Snowflake Kisses stamp set in Blueberry Bushel ink diagonally down the inbetween white space!
I adhered the die cut snowflake pieces to the inside of the card.

If I had to do it over again I would adhere a second Basic White 4″ x 5 1/4″ piece on the inside because of the darker colored cardstock and then adhere the snowflake pieces for a tone on tone effect!

Adhere the die cut and blended layer to the card base and adhere the blue Traditional Sparkling Sequins to the front to finish this super quick and easy card!

Now go and create some artwork of your very own and start collecting your Christmas cards to send to family and friends – one stamp at a time!

Happy Stampin’
Natalie

snowy delight bundle card

snowy delight bundle card

This fun winter card will be on be one of the. featured cards at my upcoming card class and with the new Snowy Delights Bundle with coordinating dies and masks it is super easy to make!

UPCOMING CLASS SCHEDULE:
*Card Class Design A
**Card Class Design B
***Card Class Design C

*September 9th – Greenville Area Library 4:30pm – 6:30pm * (RSVP to library)
*September 15th – Conneaut Lake Library 1pm – 3pm
(RSVP to library)
**September 23rd – Linesville Library 2pm – 4pm**. (RSVP to library)
***September 29th – studio class 1pm – 3pm (RSVP to me) same format as library classes 4 cards for $10***
*Card designs for the Greenville Area library and the Conneaut Lake Library classes are the same –
**the designs for the Linesville Library and ***studio class are different from the other classes!

Measurements:
BASE: Azure Afternoon CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: (2) 4″ x 5 1/4″ , 3/4″ x 4 1/4″
scrap for snowflake die

Whenever I am stamping a larger format stamp image I turn it stamp side up and place the ink pad directly on the stamp image.
I think this gives you better coverage and control as you can see where you are inking!
I stamped the large snowflake image from the Snowy Delights stamp set off the layer above and below – this creates the illusion of expanse!
I stamped in Blueberry Bushel ink.
Using the Snowy Delights Decorative Masks #1 and Balmy Blue ink and a blending brush – I colored in the two partial snowflakes.
Using the Snowy Delights Decorative Masks #2 and Lost Lagoon ink and a blending brush – I colored in the two partial snowflakes over the Balmy Blue ink.
Using the Snowy Delights Decorative Masks #4 and Azure Afternoon ink and a blending brush – I colored in the two partial snowflakes and the empty white space beside the two partial snowflakes.
Using the cluster of smaller snowflakes stamp image in Blueberry Bushel ink I stamped in between the two partial large snowflakes to add depth and texture.
Taking the extra 4″ x 5 1/4″ Basic White layer I stamped the large snowflake image off the bottom of the page in Blueberry Bushel ink.
I stamped the inside sentiment in Blueberry Bushel ink and blended the bottom edge with a blending brush and Blueberry Bushel ink for added color and texture.

Stamp the outside sentiment to the 3/4″ x 4 1/4″ strip, add the small snowflake stamp to the left-hand edge and blend the edges with a blending brush.

Adhere this layer to the inside of the card base.
Add the large snowflake die to the upper partial snowflake image – matching the die with the image and adhere with Multipurpose Glue.
Turn the layer over to the backside and cut the die that is hanging over the edge off.
Adhere this layer to the card front.
Pop up the sentiment strip on Stampin’ Dimensionals and add to the bottom third of the card front.
Add the new Frosted Iridescent Dots in the Blue color to the card front to finish off this lovely Wintery card in a soft coordinating style.

Try your hand at some masking today and go create some artwork of your very own – one mask- one stamp at a time!

Happy Stampin’
Natalie

happy 4th – thank a veteran with a card

happy 4th – thank a veteran with a card

The Fourth of July is probably my second favorite holiday after Christmas. I am so very grateful to have been born in this great country! I am also very thankful for the freedoms we so often take for granted.

So I am challenging all of my friends and customers to send a thank you card to a friend or family member that you know that served or is serving in the military – we often do not take the opportunity to let people know how much they are appreciated and this is a perfect example. Do you have someone you know that has sacrificed in service of this special country of ours? Will you rise to my challenge and make and send a thank you card? I hope I inspire you! I didn’t necessarily have a 4rth of July stamp set but if you color the card in red, white and blue and place a thank you sentiment on it that conveys the point!

Measurements:
BASE: Real Red CS: 5 1/2″ x 8 1/2″
Basic White CS: (2) 4″ x 5 1/4″

This is a simple and sweet thank you card.

Brush the top third of the Basic White layer with Real Red ink using a blending brush.

Brush the bottom third of the layer with Blueberry Bushel ink and a different blending brush. Leave the middle white uninked.

Stamp the Spring Corners thank you sentiment on diagonal corners and then stamp the small heart image in between the two sentiments using Tuxedo Black Memento ink.

Emboss the Basic White stamped layer in your Stampin’ Cut and Emboss machine using the Dotted Circles 3D Embossing folder.

Because you blended the ink first and this is a deep 3D embossing folder you may get some white paper crackling through the color – I love this effect! If you do not want this effect color the embossed layer after running through the machine.

Adhere the embossed layer onto the Real Red CS base.
I adhered some white sequins (these are retired sorry but you could use our Iridescent Pearls for the same effect!) on the card front and you can send this patriotic thank you note on it’s way to your favorite veteran – mine is on it’s way to my marine brother-in-law!

Have a wonderful Fourth of July celebration! We are so blessed to be free and able to live in this wonderful Democracy – even though we may not all agree politically – we all have the right to live as we choose and that I am so very thankful for.

Hope that this inspires you to make your own thank you card for someone that you care about! Now go and create some beautiful red,white and blue artwork of your very own – one stamp at a time!

Happy Fourth of July and Happy Stampin’
Natalie

more color mondays – blueberry bushel, pretty in pink and granny apple green

more color mondays – blueberry bushel, pretty in pink and granny apple green

Today’s More Color Mondays color challenge is a triadic color challenge featuring Blueberry Bushel, Pretty in Pink, and Granny Apple Green.

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, scrap for stamping
DSP: 4″ x 5 1/2″
Granny Apple Green CS: (2) 1/2″ x 5 1/2″
Pretty in Pink CS: scrap for die cut

Die cut the Pretty in Pink CS with the Spotlight in Nature dies, stamp in Tuxedo Black a partial image of the roses from the Layers of Beauty stamp set. Stamp the Happy Anniversary sentiment above.
Adhere the Granny Apple Green CS to the edges of the Basic White base. Adhere the Blueberry Bushel DSP in between the Granny Apple Green CS edges.

Adhere the stamped die cut circle on Stampin’ Dimensionals and attach it to the left hand center of the base card.
Stamp the butterfly in Tuxedo Black Memento ink. Color the wings with Blueberry Bushel and Granny Apple Green Stampin’ Blends markers.
Fussy cut the butterfly. Attach the butterfly with Stampin’ Dimensionals.
Adhere two Two-tone Sparkle Gems around the sentiment.

This simple stamping card is an easy way to make a great looking card – try it with your stash and create your own artwork – one stamp at a time!

Happy Stampin’
Natalie