using the new stampin’ positioner tool

using the new stampin’ positioner tool

Stampin’ Up!’s new Stampin’ Positioner is the latest in a long line of practical and innovative Stampin’ tools! We are super excited to have a stamp positioning tool back in the Stampin’ Up! inventory and this one is exceptional.

With its spring loaded design, the stamp sits above the paper until you press on the plate and bring the stamp in touch with the cardstock, which makes this design ideal for this card technique!

When you are making a card with a repeating design – it is imperative to place the stamp in an exact position and be able to re-stamp if the image is not perfect. Placement is key for this type of project and this spring loaded board delivers!

Measurements:
BASE: Granny Apple Green CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″, scraps for masking

Place the Basic White CS layer on the bed of the Stampin’ Positioner and place the two magnets down on the paper to hold the paper in place.
Attach the floral stamp onto the Stamp Positioner plate – make sure that it is hovering over the cardstock layer exactly where you would like to have the stamped image.
Ink up the stamp and press down on the sring loaded plate to stamp the image.
Remove the plate and if the image did not stamp properly you can ink again and stamp in the same spot.

If the stamp if complete rotate the paper and place the plate with the stamp over the paper – adjust the paper if the stamp will not stamp in the place that you would like it to be.

Take the masks that you pre-stamped and pre-cut and place one over the stamped image to protect it from the stamp and ink.

Once the second stamp is placed and stamped rotate the paper and mask the image closest to where the new stamp will be.

Place the plate back on the positioner and make sure that when it is stamped it will be in the right place.

Ink up the stamp and press down to stamp, remove the mask and rotate the paper for the last stamp to complete the wreath shape.

For this last stamp placement you will m=need two masks one for the left and right stamped images – cover with the masks, make sure that the stamp is hovering over the place you would like to stamp it. Ink up the stamp and press down on the spring loaded platform plate.
Remove the layer from the Stampin’ Positioner and using blending brushes color the flowers in Poppy Parade ink.
Color the leaves and the outer edges of the layer in Granny Apple Green ink with a blending brush.
Adhere the Basic White CS layer to the Granny Apple Green CS base.
Adhere three embellishments – I used some retired embellishments from the holiday mini but there are many current ones that would look excellent with this card like the Sparkle Dot Essentials!

This Stampin’ Positioner is a great tool to add to your Stampin’ Supplies. Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

beautiful gallery dsp frame card

beautiful gallery dsp frame card

There is a really cool frame die in the Gallery Blooms bundle that I decided to play with and come up with a frame card to showcase the gorgeous Designer Series Paper that come sin the Beautiful Gallery Suite of products!

Measurements:
BASE: Mossy Meadow CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
(2) 4″ x 5 1/4″ layers and (1) 3/4″ x 3 1/2″
Basic Beige CS: 1″ x 4 and scrap for the long
thin banner die from Stylish Shapes die set
DSP: 3 1/4″ x 5″

Take the 2 Mossy Meadow 4″ x 5 1/4″ layers and emboss them with the Damask Designs.
Die cut the frame die from the Gallery Blooms die set with one of the layer pieces.

Cut the DSP to 3 1/4″ x 5″.

Stamp the “I miss you already” sentiment from The Right Words sentiment set in Mossy Meadow ink on a Basic Beige scrap and die cut with the thin long banner die from the Stylish Shapes die set.
Adhere to the Mossy Meadow 3/4″ x 3 1/2″ piece.
Emboss the 1″ x 4 1/4″ Basic Beige piece in the Mini Corrugated 3D embossing folder and adhere the sentiment piece on top of the embossed layer.
Place Stampin’ Dimensionals around the frame layer.
Adhere the 4″ x 5 1/4″ embossed layer onto the card front leaving even borders the entire way around.
Adhere the DSP layer on the embossed Mossy Meadow layer under the frame and secure the frame with Dimensionals over top the DSP.
Adhere the sentiment piece over the bottom third across the frame.
Adhere three Low Profile Mossy Meadow Sparkle Dots around the sentiment piece to finish off this stunning card that “frames” this gorgeous DSP to perfection!

Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – color coach analagous colors

more color mondays – color coach analagous colors

I’m in the process of designing a color theory class for this summer and I have been preparing by using our Color Coach tool to come up with different color combinations!
Today’s color combination is one of the four color theory combinations I will be teaching about: Analogous color combinations.
Analogous colors live adjacent to one another on the color wheel – they are similar in color and compliment each other – working well as a combination set of colors!

Today’s Analogous Color Combination for More Color Mondays color challenge features: Poppy Parade, Flirty Flamingo and Petal Pink.

Measurements:
BASE: Petal Pink CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 3″ x 4″ layer
Flirty Flamingo: 3 1/4″ x 4 1/4″ layer,
scrap for die
Poppy Parade CS: 2 1/4″ x 5 1/2″ strip and
scrap for die

Emboss the Poppy Parade strip with the Damask Designs embossing folder.
I wanted the design to pop a little so I took a Craft White ink pad and dragged it lightly over the embossed (raised) areas of the cardstock.
Adhere the embossed strips of cardstock to the left-hand side of the card base leaving about 1/8″ border on the left side.
Run the Petal Pink cardstock layer through the Stampin’ Cut and emboss with the partial cut die from the Beautiful Motifs die set. This embosses and partially die cuts the image so it remains attached to the cardstock and can be bent upwards to add depth and dimension to the card.
Adhere the Petal Pink layer to the 3 1/4″
x 4 1/4″ Flirty Flamingo layer.
Pop up the double layer onto the center of the card front on Stampin’ Dimensionals.

Die cut the Queen Anne’s Lace die from the Beautiful Motifs die set in both Flirty Flamingo and Poppy Parade card stock.

Adhere the Lace dies to the card front over the partial die cut with Multi-purpose Liquid glue.
Stamp the sentiment – normally I would have stamped this prior to adhering to the card – I thought I was going to stamp the sentiment onto a die cut but decided last minute to stamp it in the lower right-hand corner in Poppy Parade ink.
I adhered Pearl Basic Jewels to the card front to finish off the card. I love how this turned out! Try a new analogous color combination from your stash and go create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

beautiful gallery watercolor gate fold card

beautiful gallery watercolor gate fold card

Happy Friday! I am back in PA after settling my youngest in New England for a summer internship and after spending the day cleaning up dry wall dust that is EVERYWHERE! I took a much needed crafting break and created this gate fold watercolor card! Hope you like it!

Measurements:
BASE: Timid Tiger CS: 5 1/2″ x 8 1/2″
scored at 2 1/8″ in from each end
Fluid 100 paper: (2) 1 1/2″ x 5 1/2″
Basic White CS: scraps for die cuts and
sentiment strip and 4″ x 5 1/4″ inside layer

I used a retired block (sorry I forgot that we had retired the I acrylic block) but you can use any size you have on hand!
I added color to the top third of the block by pressing the ink pad directly onto the acrylic block.

I applied Timid Tiger ink directly onto the middle of the acrylic block (it is ok to overlap a darker ink color but you will contaminate the ink pad if you stamp a lighter ink color over an existing darker color!)
I applied Poppy Parade to the bottom of the acrylic block.
I sprayed the acrylic block with water from a Stampin’ Spritzer and placed the two pieces of Fluid 100 paper together and stamped the block of ink directly onto the middle of the papers. I held the block in place for a few seconds to allow the water and ink color to penetrate the fluid 100 Watercolor paper.
Score the base card 2 1/8″ in from each side of the 8 1/2″ side of the card. Fold inward until the two sides meet in the middle – this is called a gate-fold card.
I added the 4″ x 5 1/4″ Basic White layer to the inside of the card.
I stamped an image from the Gallery Blooms stamp set to the bottom of the Basic White layer for a little added interest!
I adhered the Fluid 100 papers right up to the inside edges of the gate fold.

I die cut two images from the Beautiful Motifs die set in scrap Basic White cardstock and adhered one to each side of the gate fold.

I stamped a thank you sentiment from the Beautiful Motifs stamp set in Timid Tiger to the left hand side of the 1″ x 5 1/2″ Basic White strip and added some flower images from the Gallery Blooms stamp set in Crushed Curry to the right hand side.
I adhered only the left hand side of the sentiment piece so that the card will still open.
I adhered three 2025-2027 In Color Flat Pearls in Timid Tiger to finish off the first version of this card.

I decided to add a little sparkle and depth to the card by adding a splatter technique by tapping the brush tip side of the Poppy Parade Stampin’ Blends over the card front.

I brushed the leaves and petals of the two die cuts with Wink of Stella and the wet brush moves a little of the ink color over the dies as well as added a fine sparkle that is gorgeous but subtle and it does not show well in these photos but trust me it is amazing!
Such a fun card and I am glad to be home and crafting again!

Try this fun fold and some of the techniques I shared and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

in color strips card

in color strips card

Today’s card features the Beautiful Gallery Suite of products and the new In Colors: Strawberry Slush, Timid Tiger, Darling Duckling, Cloud Cover and Secret Sea.

Measurements:
Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″ scrap for the stamp/die cut
Strawberry Slush CS: 4″ x 5 1/4″ and strip scraps
Timid Tiger CS: scrip straps
Darling Duckling CS: strip scraps
Cloud Cover CS: strip scraps
Secret Sea CS: strip scraps
Basic Black CS: scraps for the Beautiful Motifs
dies

Die cut the 4″ x 5 1/4″ layer with the second largest die in the Textured Notes die set.
Save the die for future use and use the frame outer edge.
Adhere the sides with tape and start to place strips over the back of the frame.
Finish lining the inside of the frame with the rest of the strips.
Stamp a sentiment on one of the strips.
Pop up the frame on Stampin’ Dimensionals and adhere to the Basic White card frame.
Stamp the large flower in Tuxedo Black Memento ink and die cut. Die cut the smaller floral images from the Beautiful Motifs die set in Basic Black CS.
Adhere the black and white floral die above and to the right of the sentiment.
Adhere the black die cuts over and under the stamped floral image.
Add 2025-2027 In Color Flat Pearls on the card front to finish off the card.

Now go and create some artwork of your own – one stamp at a time!

Happy Stampin’
Natalie

This is a sneak peak and the new products will not be available until May 6th and therefore will not be in the clickable pictures below.