tent-fold stepper card

tent-fold stepper card

Today’s blog post is an easy 3D fun fold. It is called a Tent-fold Stepper card featuring the Celebratory Sips suite of products.

Measurements:
BASE: Strawberry Slush CS: 4 1/4″ x 11″
score at 4″, 8″, 9″ and 9 3/4″
DSP: 3 3/4″ x 4″ and 1″ x 3 3/4″
scraps for fussy cutting
Basic White CS: 3 3/4″ x 4″

Score the card base at 4″, 8″, 9″ and 9 3/4″.
Fold the card base at the score lines, valley fold at 4″, valley fold at 8″, valley fold at 9″ and a mountain fold at 9 3/4″.

Stamp the “Cheers” sentiment in Strawberry Slush ink in the center of the Basic White CS.

Adhere to the second panel with the word across the 4 1/4″ side.

Adhere the 1″ x 3 3/4″ DSP strip to the bottom panel.

Adhere the 3 3/4″ x 4″ DSP piece on the outside of the first panel.

Fussy cut some cocktail glasses from the 12″ x 12″ DSP.

Stamp the sentiment Cheers in Strawberry Slush on Basic White CS scrap, fussy cut a diagonal line after the stamped image. Pop up the sentiment piece onto the small panel. Adhere the three cocktail glasses around the sentiment.

Adhere three 2025-2027 In Color Flat Pearls around the sentiment.

This 3D fun fold is an easy card that showcases this fun paper. Try this card with your own stash and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

floral in bloom criss cross card

floral in bloom criss cross card

This criss cross card is an easy fun fold and the Floral in Bloom Suite is the perfect set of products for this fun canvas.

Measurements:
BASE: Strawberry Slush CS: (2) 4 1/4″ x 11″
scraps for dies
DSP: (2) 4″ x 5 1/4″
Basic White CS: 4″ x 5 1/4″
scraps for dies

Score the Strawberry Slush CS at 5 1/2″ and cut from the middle score line top edge to the bottom corner on both pieces.
Cut a 1/4″ off of only one of the stright sides opposite the diagonal cut.
Adhere the two pieces of cardstock together with the piece that is 1/4″ shorter on the inside with the top and bottom and score lines all lined up!
Cut the 2 DSP layers in half diagonally and then paying attention to the direction of the pattern
cut the layers that will match up with the triangles on the outside of the card 1/4″ off both straight sides.
I stamped the inside sentiment in Strawberry Slush ink onto the 4″ x 5 1/4″ Basic White layer make sure it is lower than the criss cross so it is hidden when the card is closed.
I adhered one of the 1/4″ DSP discards below the sentiment.
Adhere the diagional DSP pieces. to the outside of the diagonal criss cross panels of the card.
I die cut the Large Flower from the Pretty Florals dies and the Bloom word die from the Sweet Blooms die set in Strawberry Slush cardstock and die cut the word matte from the Sweet Blooms dies and the inside detail of the flower from the Pretty Florals dies in Basic White.
I adhered the white inside flower detail to the large flower in strawberry slush and adhered it to the outside diagonal card panel so it lined up where the criss cross intersects.
I adhered the white word matte below the flower.
I adhered the Strawberry Slush cardstock word die onto the Basic White matte.
I adhered the 2025-2027 In Color Flat Pearls to the outside of the card to finish it off!
Try this fun and easy fun fold and go create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

mixed media pop out fun fold

mixed media pop out fun fold

This is a fun movement card that has two “arms” that swing out from under a DSP covered box.

Measurements:
BASE: Poppy Parade CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Piece #1 2 1/2″ x 4 1/2″ score at 1/2″ and 1″
Piece #2 2 1/2″ x 3″
Piece #3 1″ x 3 1/4″ scored at 1/2″, 1″ and 2 3/4″
Pieces #4 and 5 (2) 2 1/4″ x 2 3/8″
Piece #6 1 3/8″ x 7 1/2″ scored
DSP
Piece #1 2 1/4″ x 3 1/4″
Piece #2 2 1/4″ x 2 3/4″
Piece #4 and 5 2 1/8″ x 2 1/4″

Take the 1 3/8″ x 7 1/2″ mechanism and score on the 1 3/8″ side at 1/2″ and 1″
turn on the 7 1/2″ side and score at the 2 1/2″ mark from the top score line to the upper edge and score at the 2 1/2″ mark below the bottom line to the bottom edge.

There are three long sections going down the 7 1/2″ side in the 1 3/8″ x 7 1/2″ layer.
Draw a mark 1/2″ inside the small score line.
Draw a line from the mark to the top of the score line on the narrower strip, then draw another line to the bottom of the score line on the equal strip.

Repeat on the other side.

Score the lines with the Take Your Pick tool.

Cut the four corners from the 1 3/8″ x 7 1/2″ piece.
Fold the scored pieces at the drawn lines.
One side will have an extra flap this will be positioned towards the card front. Bend the score line upwards.
Flip the mechanism over so that the extra flap piece is facing downwards and place glue on the top portion of the mechanism as shown in the photo below.
Place the glue side down on the back of the inside of the card – position the mechanism so it is in the center of the card butting up to the score line.
Close the card front and rub in the middle of the card to secure the glue and bottom of the mechanism to the inside of the card.
The center section of the mechanism should have the tab facing upwards at this point.
Place glue on the back center section – NOT ON THE TAB yet! – above the score line on the mechanism as in the photo below – and close the card front to secure the mechanism to the card front.
The mechanism will be secured on each side of the card and have the front tab free and two arms of the mechanism one off to each side.
Adhere the DSP pieces to the Poppy Parade cardstock pieces:
Adhere the 2 1/4 x 3 1/4 DSP piece to the 2 1/2″ x 4 1/2″ above the score lines.
Adhere the 2 1/4″ x 2 3/4″ DSP piece to the
2 1/2″ X 3″ piece.
Adhere the (2) 2 1/8″ x 2 1/4″ DSP pieces to the 2 1/4″ x 2 3/8″ pieces of cardstock.
Place glue on the left hand arm of the mechanism and position the 2 1/4″ x 2 3/8″ piece with the 2 3/8″ piece along the arm.
Place glue on the right hand arm and glue the 2 3/8″ side of the 2 1/4″ x 2 3/8″ piece to this arm of the mechanism.
Place a thin line of liquid glue to the back edge that is not scored and adhere to the tab on the mechanism.
Fold the mechanism cover at the second score line flatten out the cardstock and place glue on the outer edge and close the card and adhere it to the back portion of the card.
You will need to place the “wings” of the mechanism under the cover before closing the card. This will be the cover for the pop out mechanism!
Take the 1″ x 3 1/4″ cardstock piece and score at 1/2″, 1″ and 2 3/4″
PLace glue on the single tab and place face down in the center of the cover and close the card to secure rubbing over the card to let the glue adhere.
Fold the other side at the second score line and place glue on the first section only. Close the card and secure the cardstock piece to the inside of the card front. It will form a pop up box for the 2 1/2″ x 3″ card stock piece to adhere to.

Place liquid glue to the front of that box.

Lie the 2 1/2″ x 3″ DSP covered piece – face down with the DSP facing down towards the DSP on the cover piece and close the card front and rub on the mechanism to adhere this piece to the upper box.
I stamped two tulip images from the Mixed Florals stamp set and colored them with Poppy Parade, Petal Pink and Granny Apple Green Stampin’ Blends markers and then die cut them.
Now the mechanism and the covers are complete and this is what the card inside will look like.
I cut up one of the tulip images and adhered pieces to the pop out wings of the mechanism so that flowers appear when the pop out is engaged!
I also stamped two sentiments from the Mixed Labels stamp set in Tuxedo Black Memento ink and die cut with the sentiment dies from that set.
I placed the “I’m so glad we’re friends on the inside cover of the mechanism.
I adhered the second tulip image to the outside of the card.
I popped up the other sentiment piece on the card front with Stampin’ Dimensionals.
I added Silver edged sheer ribbon around the card for closure.
I added some of the extra tulip pieces leftover from the inside of the card and popped them up over the ribbon to hold it in place and added Basic Grey and Smoky Slate Pearls to the card to finish it off with a little sparkle!

This is a perfect WOW card for that someone special!
Try this or another one of my fun fold tutorials and go create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

2025 OnStage fun fold swap cards

2025 OnStage fun fold swap cards

One of the coolest things about going to OnStage Stampin’ Up!’s annual convention is the comraderie that is there and the people you meet – seeing friends you have made online and those you have met before – it is a group of very fun like minded people and I was so sorry it sold out before I got to registration! But last year I met a group out of New York and
Micheal D. hosted a multitude of swaps – I participated in three of them!

These are the fun folds I received! Hope it give you loads of inspiration and ideas!

This first fun fold swap from Mary S. from Wisconsin and features one of my favorite suites – Full of Life Suite – which is currently on the last chance list – so that means WHILE SUPPLIES LAST! Hurry and order if this is on your wish list!
This is a front flap fun fold and uses the full of life DSP and the dies from the set. It also uses the newer Plaster painting 3D embossing folder in Balmy Blue all set on a Blueberry Bushel card base.

This next swap card from Kim P. in Export, PA used the Faith Collection and Unbounded Love Bundles, CHoose Happy and Floral Delight stamp sets and the Grove, Linked Together and Textured Notes dies the bough punch and the Plaster Painting 3D embossing folder. She made a double Z-fold fun fold Easter card for us and did a lovely job.
The next swap card is a gift card slider fun fold and is from Dena R. who is a sideline demonstrator (we are in the same family tree!)
This is a very cool card and lifts the gift card up out of an inner pocket when you open the front flap! She used the Memorable Blooms bundle which is also on the Last Chance list in hues of Peach Pie!
This book binding fun fold card from Dianne G out of Mineral, VA features a pinwheel focal point made out of the Perennial Lavender DSP and has sweet matching decor on the inside.
This next fun fold swap card from Sherry P. features a creative take on an extended z-fold card (like the one I made for this past More Color Monday’s post). She turns the card to a landscape orientation and adds circle dies from the Spotlight on Nature set and stamped with the Delightful Wishes suite of products.
Delightful Wishes was a popular Suite of products and here is another fun fold swap card from Autumn B from Wilmington NC. This is a front flap gate fold card and this fun fold features the Eyelet embossing folder and the Floral Delight DSP.
This DSP fun fold card features a 1/4 sheet of Blueberry Bushel card stock as the base and then a 4″ x 12″ piece of DSP for the card using the Wildflower Birthday DSP from Elaine S.
Lori P from Escondido, CA made this sweet Floral Delight DSP offset gate fold card using the Wildflower Birthday sentiment.
Robyn M from Atlanta, GA made this fun birthday card. This fun fold pulls the doggie in the circle dies out on a separate fold so it peeks through the card opening one minute and out to the side the next! This card uses the One More Year stamp set!
This explosion book binding fun fold card from Robyn B out of Texas used the Meant To Bee bundle for a super sweet card for the one you love!
This triple panel fun fold card from Judy K. in Virginia features the Countryside Inn DSP which is on the Last Chance List and the Cake Celebrations bundle.
This swap card combines two fun folds the Book Binding and Z fold for a unique look with the Lily Pond Lane Last Chance List DSP from Janice A in Texas
Kathy A from San Antonio, TX used a lovely Perennial Lavender DSP decorated belly band to enclose her gate fold explosion card. The Layered Florals embossing folder is on the Last Chance list if you like it – it is on sale!
Diane L’s Fun fold swap card uses the Everyday You and Me suite of products for a double panel z fold card that is stunning! One of my favorite swap cards I received – nice job!
Product List
Paper Snips
[103579]
$12.00
Bough Punch [ 157711 ]
[157711]
$24.00
seaside wishes z with a side fold fun fold

seaside wishes z with a side fold fun fold

This is a fun fold I designed it is a z fold with a side flap. I added an extra piece on the z fold and extended over the side flap with lots of fun Seaside Wishes die cuts!

Measurements:
BASE: Crumb Cake 5 1/2″ x 10 3/8″
scored at 2″, 4″ and 8 1/4″
scraps for die cutting and stamping
1/2″ x 4 1/2″ strip
Basic Beige CS: 2 1/2″ x 5 1/2″
4″ x 5 1/4″ for inside middle layer
scraps for stamping, embossing and die cutting
Flirty Flamingo CS: 1/2″ x 4 1/2″ strip and scraps
for die cutting

Stamp the inside sentiment and starfish images on the Basic Beige 4″ x 5 1/4″ layer and adhere to the inside middle panel.
Score the base cardstock at 2″, 4″ and 8 1/4″.
Fold the 2″ score line in a mountain fold, score the 4″ and 8 1/4″ score lines into a valley fold.
Emboss the 2 1/2″ x 5 1/2″ Basic Beige layer in the Seaside Wishes hybrid embossing layer and placing tape on the outside of the first panel adhere so the Basic Beige panel is about 1/4″ from the edge and hanging over the right hand side of the first panel.
Emboss and die cut a few of the sand dollars from the Hybrid embossing folder in the Basic Beige CS and adhere to the outside middle of the right hand panel.
Die cut a few small starfish stamped in Pecan Pie ink on Crumb Cake CS and plain and use two on this panel as well.
Die cut a bunch of the Seaside Wishes images and dies in all three cardstock colors and arrange them on the left-hand outside panel extending over towards but not exceeding the right-hand edge of the card.
Stamp the outside sentiment in Pecan Pie ink on the Flirty Flamingo strip and adhere it over the Crumb Cake strip. Pop up on Stampin’ Dimensionals and place in the middle of the left-hand panel.

Color Pearl Basic Jewels with the Dark Flirty Flamingo Stampin’ Blends and adhere to the card as a final coordinating detail!

Unfolded this card will stand on it’s own and with all of the die cut decor it will display beautifully!

Try this extra flap z-fold card soon with your supplies and show me how it turns out!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie