product of the month – wild bunch card

product of the month – wild bunch card

Today’s card features the newest Product of the Month incentive – spend $75 before shipping, tax and coupons and this sweet set of whimsical animals and sentiments can be yours for $5!

This card also uses Card Sketch #124! Play along and make a card using this sketch – if you do send me a photo I would love to see your interpretation of the sketch. I love sketches, especially when you need a little inspiration and don’t we all sometimes! Remember a sketch is just a starting point! Here I turned the sketch on it’s side and used it in landscape instead of portrait mode!

Measurements:
BASE: Crisp Cantaloupe CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 1/4″ strip
Basic White CS: 4″ x 5 1/4″, scraps for stamping
animals, 1/2″ strip

Stamp each of the animals from the Wild Bunch stamp set in the Basic Black Hybrid Ink Pad on a scrap piece of Basic White CS.

Stamp the Happy Birthday sentiment on a 1/2″ Basic White CS strip and then stamp the checkered pattern on either side of the sentiment in the Basic Black Hybrid ink pad.

Here is a SNEAK PEAK of the recent pre-order for the July Online Exclusives – remember we now offer Online ONLY stamps and bundles and other goodies to keep our offerings fresh and exciting so do not forget to peruse the Online ONLY catalog so you do not miss all the new offerings!

This is a very sweet embossing folder called Swirls of Magic and is my favorite new item from the July pre-order!

It pairs perfectly with these whimsical animals!
I embossed the 4″ x 5 1/4″ Basic White layer.

Adhere the embossed layer to the Crisp Cantaloupe CS base.
Adhere the 1/4″ x 5 1/4″ Crisp Cantaloupe strip across the bottom of the Basic White embossed layer.
Color in the animals with Crisp Cantaloupe, Smoky Slate, Golden Glow, Gray Granite, Crumb Cake, Darling Duckling and Barely Blush Stampin’ Blends markers.
Color the openings in the letters and the blocks with the Crisp Cantaloupe Shimmer Brush for some subtle sparkle on the 1/2″ Basic White sentiment strip.

Adhere the 1/2″ strip above the Crisp Cantaloupe 1/4″ strip across the bottom of the card.

Start on the right-hand side of the card and start adhering the animals above the sentiment strip on the card.
Adhere the animals across the width of the card – popping up one of them I chose the snail to pop up above the Happy Birthday sentiment!
Wrap the Crisp Cantaloupe ribbon around the top of the card front and tie in a knot.
I added two Crisp Cantaloupe 2026-2028 In Color Dots to the card around the sentiment!
I decided I wanted a little more sparkle on the card so I added a little more shimmer brush to the cow’s muzzle and the snails shell! It is hard to see in photos but the shimmer is very fun!
Try this sketch when you have some free crafting time and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

P.S. Reminder: The Swirls of Magic embossing folder will not be available until the July Online Exclusives are released so it will not appear below in the photo clickables because it is not available to the public to order yet!

more color mondays – barely blush, balmy blue and soft sea foam

more color mondays – barely blush, balmy blue and soft sea foam

I love this new Artisan Sketched Garden Designer Series Paper and apparently everyone else does too as of the end of this week it is back ordered but we have a new notification system so if you love these cards – put your email and name down to be notified as soon as they return!

I love black and white – something about the contrast that is just intoxicating – so striking!

This paper has so much possibility!

Measurements:
BASE: Barely Blush CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 1″ x 5 1/2″, and scraps for the vases.
Balmy Blue CS: 1/2″ x 5 1/2″
Soft Sea Foam CS: 2″ x 5 1/2″
Basic White CS: scrap strip for the sentiment

I gathered the Light and Dark Stampin’
Blends for all three colors in this challenge: Barely Blush, Balmy Blue and Soft Sea Foam and colored an entire line of the vases from one of the Artisan Sketched Garden DSP.

I fussy cut some of the vases out to use on the cards.

I adhered the Balmy Blue strip under the bottom edge of the DSP strip and adhered both to the Soft Sea Foam layer. I adhered the three layers to the center of the card front.
I stamped the Basic White strip with a sentiment and Blended it with a Blending Brush and Barely Blush ink.
I piked out three vases and adhered them across the designer series paper and colored cardstock strip section alternating height.

I fussy cut some of the small flowers on the scraps of the opposite side of the vase DSP and adhered them to the bottom of the card front below the vases.

I adhered more little flower fussy cuts to the top edge of the card front.
I popped up the sentiment piece with Stampin’ Dimensionals over the vases.
I added two Barely Blush 2026-2028 In Color Dots embellishments to finish off the card with some coordinating soft pearlescent bling!

Try a soft color combination with your next stampin’ project – now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Here is another card I made using these same More color Monday color challenge colors!
I used a new embossing folder in the background called Floral Spray 3D embossing folder also currently unavailable this was a popular item also! It will be back in stock soon if you have to have it!
in color strip card

in color strip card

It is fun to use all five new 2026-2028 In Colors on a single card and today’s blog post does just that!

Using strips and an embossing folder creates a card with tons of dimension and great appealing new colors!

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, 45″ x 5 1/4″ scrap strip for
sentiment and butterfly dies
Barely Blush CS: 3 3/4″ 5 1/2
Crisp Cantaloupe CS: 3 3/4″ 5 1/2
Golden Glow CS: 3 3/4″ 5 1/2
Hydrangea Hue CS: 3 3/4″ 5 1/2
Peaceful Pine CS: 3 3/4″ 5 1/2

Emboss the 4″ x 5 1/4″ Basic White layer with the Fern and Flora 3D embossing folder and adhere to the Basic White card base.
Emboss each of the In Color layers in the same place as the Basic White embossed layer so the design is consistent.

Cut the In Color embossed layers into 3/4″ strips and 3 3/4″ wide.

Start at the top of the embossed Basic White layer and adhere the first 3/4″ strip to near the top about 1/8″ down from the edge.

Adhere the next color by popping it up with Stampin’ Dimensionals leaving another 1/8″ border above the next color strip.
Continue adhering the different colors alternating heights gluing directly to Basic White embossed layer and then popping it up with Stampin’ Dimensionals until you reach the bottom of the Basic White embossed layer.
Stamp the sentiment on a 1/2″ strip and cut diagonally on each end for a little flair.

Pop up the sentiment on Stampin’ Dimensionals and place on the card front.

Stamp the small butterfly image from the Fern and Flora stamp set and die cut them out.
Adhere to the card base over the In Color strips for added texture and imagery.

Add two Peaceful Pine 2026-2028 In Color Dots for some coordinating embellishments to complete the card.
If you get the entire In Color Collection try using all five colors on one card – it’s amazing how well the color work together!

Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

in color strip card

in color strip card

This In Color card uses all of the new In Colors from 2026-2028 all in one card!

These new colors are beautiful and really compliment our standard color collection.

See my post about the New In Colors and the color history update!

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, 4″ x 5 1/4″, scrap for
sentiment and butterflies
26-28 In Color CS: 1 each color 3 3/4″ x 5 1/2″
emboss and cut into 3/4″ x 3 3/4″ strips

Emboss the Basic White CS layer in the Fern and Flora 3D embossing folder and adhere to the card base.
Cut each of the 2026-2028 In Colors to 3 3/4″ x 5 1/2″ and emboss in the same section of the Fern and Flora 3D embossing folder so that the embossed image is consistent.

Cut each embossed layer into 3/4″ x 3 3/4″ strips and keep in order.

Start at the top of the Basic White embossed layer and adhere the first In Color strip at the top.

Pop up the next color strip leaving about 1/16″ to 1/8″ gap. Then adhere the next color below directly onto the embossed surface and alternate the remaining colors until you reach the bottom of the embossed layer – you will be able to fit 6 strips so one of the colors will repeat,

Stamp the “you’re an amazing friend” sentiment onto a Basic White cardstock strip and cut diagonal edges at the end of the sentiment.

Stamp two small butterflies in the new Hybrid Black ink pad from the Fern and Flora stamp set and die cut them out.

Adhere the sentiment and the butterflies to the card front over the embossed layers.

Choose a contrasting embellishment and add them around the sentiment piece.

What a fun card to display all of our new 2026-2028 In Colors – order yours today! Hope you get the chance to create today – now go and make or share your artwork – one stamp at a time!

Happy Stampin’
Natalie