winter meadow easel card

winter meadow easel card

Well, I don’t usually highlight retired products and i pulled the Winter Meadow DSP out and started designing this card and totally forgot it is retired. OOPS! but the card is so pretty I had to show you the finished result!

It is still a good teaching moment – I will teach you how to make an easel 3D fun fold card and you can try it with your stash of DSP – retired or current!

Measurements:
BASE: Basic Grey CS: 5 1/2″ x 8 1/2″
scored at 1 1/4″ and 3″
Secret Sea CS: 4″ x 5 1/4″, 3/4″x 5 1/4″
Basic White CS: 4″ x 5 1/4″, scrap for the die
DSP: 3 3/4″ x 5″, 1/2″ x 5″

Adhere the 1/2″ x 5″ DSP piece to the Secret Sea matte 3/4″ x 5 1/4″, then adhere Foam Adhesive strips to the back.
Adhere the large DSP layer to the 4″ x 5 1/4″ Secret Sea matte.
Score the card base at 1 1/4″ and 3″ on the long side.

Adhere the 4″ x 5 1/4″ Basic White layer to the inside of the card and then pop up the small DSP matte to the bottom of the Basic White layer.

Place adhesive on the outside edge of the small panel.
Die cut the small sentiment piece from the Snowflake Kisses bundle and stamp “let it snow” in Secret Sea ink. Pop it up on the DSP.

Adhere the large DSP matte to the front panel.

Adhere three Secret Sea 2025-2027 In Color Flat Pearls to the outside of the easel around the sentiment.
The front panel tucks into the raised smaller DSP piece to stand up for an easel effect hence the fun fold name!
This is a side view of the card!
Have a pretty piece of DSP or artwork that you would like to display then try this easel card fun fold and do just that!

Now go and create some artwork of your very own that you would like to display – one stamp at a time!

Happy Stampin’
Natalie

in color card sale 15% off until end of august

in color card sale 15% off until end of august

Did you know that all this month in August you can choose from all of the products that contain the 2025-2027 In Color Collection and save 15%? That includes everything Darling Duckling, Timid Tiger, Strawberry Slush, Secret Sea and Cloud Cover – cardstock, Two-tone cardstock, reinkers, ink pads, markers, embellishments, ribbon and Designer Series paper!

If you love these colors stock up now and save!

This is a simply stamped card super simple, sweet and easy! A perfect card to highlight the In Color Sale!

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Timid Tiger CS: just a hair over 1″ x 4″
Darling Duckling CS: just a hair over 1″ x 4″
Strawberry Slush CS: just a hair over 1″ x 4″
Cloud Cover CS: just a hair over 1″ x 4″
Secret Sea CS: just a hair over 1″ x 4″

and that is all you need besides a few 2025-2027 In Color Flat Pearls and a Memento ink pad!

Cut a piece of each of the 2025-2027 In Color Cardstock colors to just a hair over 1″ x 4″

Adhere the first strip so the top and right and left margins are even about 1/8″ from the edge.

Butt the edges of the strips together so no white space from the card base can be seen between the strips and so that the edges are even with the top strip. Adhere to the card base.
Adhere the last two strips – putting Secret Sea on the bottom as it is the darkest of the colors it will anchor the card and will show be the most subtle to show the stamping.
Stamp the flower image from the Mixed Florals stamp set across the right-hand side of the strips – make sure to press evenly across the entire surface of the stamp but being careful not to rock the stamp. Stamp with Secret Sea ink pad.
Choose a linear sentiment that will fit across one color strip from the Mixed Labels stamp set and stamp across the top strip in Secret Sea ink.
Adhere three 2025-2027 In Color Flat Pearls in Darling Duckling around the flower on the Darling Duckling colored cardstock strip! This will finish this simply stamped card with the final pop of In Color that it needs!
I did a second version swapping the Darling Duckling as the top strip and using different sequins embellishments.

Such a fun and simple card that easily translates for any occasion just by switching out the sentiment!

Try this type of simple stamping with colored cardstock strips and a black or Secret Sea image – no coloring required but full of color with the cardstock strips you choose! No go create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

beautiful gallery watercolor gate fold card

beautiful gallery watercolor gate fold card

Happy Friday! I am back in PA after settling my youngest in New England for a summer internship and after spending the day cleaning up dry wall dust that is EVERYWHERE! I took a much needed crafting break and created this gate fold watercolor card! Hope you like it!

Measurements:
BASE: Timid Tiger CS: 5 1/2″ x 8 1/2″
scored at 2 1/8″ in from each end
Fluid 100 paper: (2) 1 1/2″ x 5 1/2″
Basic White CS: scraps for die cuts and
sentiment strip and 4″ x 5 1/4″ inside layer

I used a retired block (sorry I forgot that we had retired the I acrylic block) but you can use any size you have on hand!
I added color to the top third of the block by pressing the ink pad directly onto the acrylic block.

I applied Timid Tiger ink directly onto the middle of the acrylic block (it is ok to overlap a darker ink color but you will contaminate the ink pad if you stamp a lighter ink color over an existing darker color!)
I applied Poppy Parade to the bottom of the acrylic block.
I sprayed the acrylic block with water from a Stampin’ Spritzer and placed the two pieces of Fluid 100 paper together and stamped the block of ink directly onto the middle of the papers. I held the block in place for a few seconds to allow the water and ink color to penetrate the fluid 100 Watercolor paper.
Score the base card 2 1/8″ in from each side of the 8 1/2″ side of the card. Fold inward until the two sides meet in the middle – this is called a gate-fold card.
I added the 4″ x 5 1/4″ Basic White layer to the inside of the card.
I stamped an image from the Gallery Blooms stamp set to the bottom of the Basic White layer for a little added interest!
I adhered the Fluid 100 papers right up to the inside edges of the gate fold.

I die cut two images from the Beautiful Motifs die set in scrap Basic White cardstock and adhered one to each side of the gate fold.

I stamped a thank you sentiment from the Beautiful Motifs stamp set in Timid Tiger to the left hand side of the 1″ x 5 1/2″ Basic White strip and added some flower images from the Gallery Blooms stamp set in Crushed Curry to the right hand side.
I adhered only the left hand side of the sentiment piece so that the card will still open.
I adhered three 2025-2027 In Color Flat Pearls in Timid Tiger to finish off the first version of this card.

I decided to add a little sparkle and depth to the card by adding a splatter technique by tapping the brush tip side of the Poppy Parade Stampin’ Blends over the card front.

I brushed the leaves and petals of the two die cuts with Wink of Stella and the wet brush moves a little of the ink color over the dies as well as added a fine sparkle that is gorgeous but subtle and it does not show well in these photos but trust me it is amazing!
Such a fun card and I am glad to be home and crafting again!

Try this fun fold and some of the techniques I shared and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

tent-fold stepper card

tent-fold stepper card

Today’s blog post is an easy 3D fun fold. It is called a Tent-fold Stepper card featuring the Celebratory Sips suite of products.

Measurements:
BASE: Strawberry Slush CS: 4 1/4″ x 11″
score at 4″, 8″, 9″ and 9 3/4″
DSP: 3 3/4″ x 4″ and 1″ x 3 3/4″
scraps for fussy cutting
Basic White CS: 3 3/4″ x 4″

Score the card base at 4″, 8″, 9″ and 9 3/4″.
Fold the card base at the score lines, valley fold at 4″, valley fold at 8″, valley fold at 9″ and a mountain fold at 9 3/4″.

Stamp the “Cheers” sentiment in Strawberry Slush ink in the center of the Basic White CS.

Adhere to the second panel with the word across the 4 1/4″ side.

Adhere the 1″ x 3 3/4″ DSP strip to the bottom panel.

Adhere the 3 3/4″ x 4″ DSP piece on the outside of the first panel.

Fussy cut some cocktail glasses from the 12″ x 12″ DSP.

Stamp the sentiment Cheers in Strawberry Slush on Basic White CS scrap, fussy cut a diagonal line after the stamped image. Pop up the sentiment piece onto the small panel. Adhere the three cocktail glasses around the sentiment.

Adhere three 2025-2027 In Color Flat Pearls around the sentiment.

This 3D fun fold is an easy card that showcases this fun paper. Try this card with your own stash and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

more color mondays – real red, timid tiger and old olive sketch #103

more color mondays – real red, timid tiger and old olive sketch #103

Time really does pass by so quickly! Today I am on the road celebrating my baby’s 21st birthday and settling him into the New England area for a summer internship – it seems like just yesterday I was in labor with my last child!! Today’s More Color Monday’s color challenge features the new 6″ x 6″ Regals Designer Series Paper in Real Red and Old Olive and Timid Tiger.

This is a simple sketch combining colors that are on opposite ends of the color wheel close to a triadic combo using the Celebratory Sips Suite of products from the last Online Exclusives release.

Measurements:
Old Olive CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 3/4″ x 5 1/2″and scraps for fussy cutting
Timid Tiger CS: 3 1/2″ x 5 1/2″
Basic White CS: 4″ x 5 1/4″ and scrap for
sentiment

The Celebratory Sips Suite comes with a very cool mini embossing folder combo pack
GLASS & GARDENS EMBOSSING FOLDER
– 2 embossing folders
– 3-3/8″ x 6-1/4″ (8.6 x 15.9 cm)
– Use with a Stampin’ Cut & Emboss Machine (sold separately)
– Compatible with the Mini Stampin’ Cut & Emboss Machine (sold separately)

I used the Glass embossing folder image on the Timid Tiger cardstock.

I adhered the Regals 6″ x 6″ designer series paper in Real Red striped pattern on the edges of the card front leaving about 1/8″ from the edges.
I adhered the Timid Tiger embossed layer to the middle on top of the Designer Series paper.
I stamped the 4″ x 5 1/4″ Basic White layer in Timid Tiger ink the Let’s Celebrate image in triplicate down the center of the layer and added a orange slice in the bottom corner.
Adhere this layer to the inside of the card.
I fussy cut a couple of cocktail images from the Celebratory Sips DSP and added the taller one directly to the Timid Tiger embossed layer and popped up the smaller cocktail glass to one side of the taller glass.
Cut about 6 inches off the Timid Tiger ribbon and fold in half and adhere to the left hand side of the fussy cut cocktail glasses images.
Stamp the sentiment Cheers in Timid Tiger ink and cut an angle at the end of the word, pop the sentiment piece up on Stampin’ Dimensionals and adhere over the ribbon.

Then I added 2025-2027 In Color Flat Pearls to finish off the coordinated look!

Try this card layout with your stash and see what you can create – one stamp at a time!
Enjoy your time as it goes fast – hug your little ones they grow up and tower over you quickly!!

Happy Stampin’
Natalie