more color mondays – petunia pop, peach pie and summer splash

more color mondays – petunia pop, peach pie and summer splash

Who says masculine cards need to be neutral or muted colors – this More Color Mondays color challenge card was made for a special birthday that is today in our family!

The Shell Collecting stamp set is a reversible stamp set – it contains 6 symmetrical stamps that can be reversed directly to be used as a two step stamping process and 2 other images that contain mirrored images of each other and you can use the flat sides of the mirror image for the reverse stamping for each of those stamps! So fun to be able to fill in the background without coloring – just ink it up and go!

Measurements:
BASE: Summer Splash CS: 5 1/2″x 8 1/2″
scored at 4 1/4″, 1 1/2″ x 4 1/4″
Basic White CS: 4″ x 5 1/4″, 1 1/4″ x 4″

I started on the corner of the Basic White CS layer with the conical shell in Petunia Pop – this is one of the two images that has two mirrored images I used the back of one and the front of the other image to two step stamp.

In the second photo I stamped the fill in portion of the conical stamp and also stamped the starfish which is a symmetrical stamp and is totally reversible on it’s own in Peach Pie ink.

I reversed the starfish on the acrylic block to the smooth side and stamped off once on my grid paper creating a lighter second generation stamping effect for the Peach Pie inked starfish.

Then I stamped the conch shell which has two mirrored images in the stamp set in Summer Splash ink.

I also stamped Happy Birthday from the January POM (Product of the Month) Fabulous Sayings in Summer Splash on the 1 1/4″ Basic White layer.

I took the flat side of the mirrored image conch shell and stamped off on grid paper two make the fill in lighter in Summer Splash ink.
I matted the happy birthday sentiment in Summer Splash CS.
I finished the 4″ x 5 1/4″ layer by stamped the entire surface with alternating colors and shell types.

Then I ran it through the Stampin’ Cut and Emboss machine with the BASE #1 plate and the Embossing Plate #4 with the Soft Waves 3D embossing folder.

I adhered the 4″ x 5 1/4″ layer to the card base and the adhered the sentiment matted layer across the top third of the card. I added two silver Faceted Snowflakes around the sentiment to finish off the card!
Try one of our super fun reversible stamp sets today this one is amazing!

Now go and create some artwork of your very own one stamp at a time!

Happy Stampin’
Natalie

new catalog sets demonstrator swap cards

new catalog sets demonstrator swap cards

One of the benefits of swapping with other crafters is that you receive back the same number of cards that you made but they are from all different stamp sets (possibly sets you do not own – which is the case for a few of these samples) and you get new ideas, Sometimes it is a new color combination or a new fun fold or a new technique. mostly it is just plain fun to see other people’s style and how they use their stamps and products!

This first card is from Denise W. who is one of my upline’s and hosts this swap every month! This is the adorable Wooly Friends Bundle and uses the Love Notes Mix and Match Designer Series paper and the Three Banner punch to punch out the DSP. Such a sweet card!

This next card is from Kathi D. and is made using the Easter Joy Suite of products including the Easter Basket Bundle and the Easter Joy Specialty Designer Series paper.
Nancy F’s swap card uses a set that I do not have but thought was so so pretty and she does an awesome job with the Aspen Grove stamp set. She uses the Faux Bronze Pentagons from the Nature walk Suite Collection of products and the sentiment from the Loveliest Trees stamp set!

This is a window card. The second picture shows the card from the inside view.

This Greenery Lane bundle card from Carol S. uses the Stone and Vine 3D embossing folder as the backdrop for this lovely neutral card. She used the dies and stamps from the Greenery Lane bundle as well as the washi tape for the strip on the left hand side of the card.
The last card I have received from this swap is from Lori V and is a bendy fun fold card using the Nature Walk Suite of products.

I will design my own card with this fun fold next week so if you want to learn how to make this keep an eye out for the post!

Here are three pictures of the card from various angles.

This is the card from the top view you can see the bendy portion.

Stay tuned for my version coming soon!

Hope you got a lot of great ideas – now it’s your turn to go and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

Product List
Paper Snips
[103579]
$12.00
more color mondays – petunia pop, peach pie and summer splash

more color mondays – petunia pop, peach pie and summer splash

Today’s More Color Mondays color challenge features some very cool new stamp sets, plus did you wonder where Sale-a-bration had gone?
Well, let me. tell you about that! This past year Stampin’ Up! announced to the demonstrators that they were developing a program to replace Sale-a-bration called the Product of the month promotion!

So instead of just two months of sales items to get for FREE with a qualifying over they are doing a YEAR LONG promotion for every month that a demonstrator or customer spends $75 they are eligible to buy one Product of the Month per that month for $5. Today’s card is made with January’s incentive “fabulous Sayings” stamp set! This is the coolest stamp set with the coolest fonts!

Measurements:
BASE: Summer Splash CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 1 1/2″ x 4 1/4″
Basic White CS: 4″ x 5 1/4″, 1 1/4″ x 4″

This card is also made with the new Mini Catalog stamp set Shell Collecting – this is a reversible stamp set! This means if the image is symmetrical you can turn the stamp over and stamp the backside that is the flat side – I always stamp that off on my grid paper so that the background is lighter than the detailed side at full strength!

For the non-symmetrical stamps this Shell Collecting stamp set have reversed images and the non-symmetrical stamps. Use the backside of one and the front detailed side of the other to get both sides!

I stamped the conical shell detailed stamp in Petunia Pop ink full strength.

This particular shell is not symmetrical so I took the other conical shell and turned it so that the flat side was upwards and stamped it into the Petunia Pop ink and stamped it off once on the grid paper, then I stamped it over the detailed image for a filled in look!

I then stamped the starfish image in Peach Pie ink.

The starfish image is symmetrical so there is only one starfish in the collection so I turned the starfish over and stamped off so that the inside filled portion is lighter.

Then I stamped the larger shell in Summer Splash ink.

I also used the January POM (Product of the Month) that I explained in the intro of this blog post – the January selection is called Fabulous Sayings and it is a fantastic sentiment stamp set. I stamped the Happy Birthday from this Product of the Month in Summer Splash ink on the Basic White strip.

Since there are two stamped images of the larger sea shell these are non symmetrical and you will use the detailed side of one and the flat backside of the other stamp. I used the other flat backside at half strength to fill in the background of the shell.
Finish the Basic White layer by alternating colors and shells to completely fill the page.

Take the layer and emboss it with the Soft Waves 3D embossing folder.

Take and adhere the Basic White sentiment strip to the Summer Splash matte strip.
Adhere the embossed layer to the card base and then pop up the sentiment strip across the card front.

I added two silver faceted snowflake embellishments – I know these are snowflakes but they look like stars or starfish to me as well!

The Product of the Month promotion is ONLY while supplies last – so make your supply list and get your order in if this is the set for you!

Below is a picture of the set – it is a great one and it’s only $5 with a qualifying order of $75!
Best $5 I have spent recently!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

card sketch #117

card sketch #117

Today’s card continues the series on Card Sketches with #117!

This simple sketch provides plenty of creative inspiration with a layer and a double matte with sprigs behind it. I followed the sketch quite literally but later on next week I will show you another card from this same sketch with a completely different look!

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4″ x 5 1/4″ layer, and scrap
for the die
Vellum CS: scrap for the sentiment matte
Lemon Lime Twist CS: 1/2″ x 4″, and scrap for
the die

Emboss the Basic White CS layer with the Stone and Vine 3D embossing folder.
Adhere the embossed layer to the card base.
Take the 1/2″ x 4″ Lemon Lime Twist CS strip and adhere it to the center of the card front.
Die cut two concentric circles from the Spotlight on Nature dies. The smaller one in Basic White CS and the next size up in Vellum CS.

Stamp the sentiment in Lemon Lime Twist ink and color the edges with a blending brush and the same ink.

Adhere the Basic White stamped circle onto the vellum circle with Stampin’ Seal.

Pop up the sentiment vellum circle with Stampin’ Dimensionals – making sure to stay inside the Basic White circle outline.
Die cut the large leaf sprig die in Lemon Lime Twist cardstock and cut into 2 pieces.
Attach the sprigs to the sentiment piece and adhere the sentiment focal piece to the card over the Lemon Lime Twist strip.
I added Holographic Resin Dots to the card for a little sparkle to complete the card!

Try your hand at this card sketch – if you are new to sketches try it literally as the sketch is drawn or be creative and use the sketch as a launching point and go crazy with ideas!

Let me know what you make – now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

birthday secret message slider card

birthday secret message slider card

Did you like decoder rings when you were little or secret messages like the ones with invisible ink? This card is a throwback to the those fun days! This is a Secret Message Slider Card featuring the Swirls Designs stamp set and the new Online Exclusive Splash of Sparkles Specialty Designer Series Paper.

Measurements:

BASE: Timid Tiger CS: 4 1/4″ x 5 1/2″
3 3/4″ x 4 1/4″, 2 1/2″ x 5″
Pretty In Pink layer: 5 1/4″ x 8 1/2″, scored at
2 3/4″ and 6 3/4″
DSP: 2 5/8″ x 5 1/8″, 1 5/8″ x 5 1/8″
Basic White CS: 2 3/8″ x 4 7/8″, 3 1/4″ x 4 1/8″

I stamped the circle image from the Swirled Designs stamp set in Timid Tiger ink to the two Basic White CS layers as shown.

Then I used the splatter image, the Enjoy the Ride and the Happy Birthday from the Boardwalk Fun stamp set in Versamark and heat embossed with Gold embossing powder and the Heat Tool.

I actually stamped the Enjoy the Ride on the 3 1/4″ piece after I photographed it – it will be the secret message you will see at the end!

With the 3 3/4″ side at the top of the 3 3/4″ x 4 1/4″ piece, score at 3/8″ for the inside slider piece.

Adhere the Basic White layers to the Mattes of Timid Tiger making sure that the score is on the left hand side of the smaller piece.

Score the Pretty In Pink cardstock layer at 2 3/4″ and 6 3/4″.

Adhere the 2 5/8″ x 5 1/8″ DSP piece to the inside left panel.

Adhere the 1 5/8″ x 5 1/8″ DSP piece to the outside right hand panel.
Add two small pieces of Tear-n-Tape to the upper and lower edge of the inside of the right side panel as shown in the photograph.
With the small tab to the left of the 3 1/4″ x 4 1/8″ adhere the Basic White stamped layer to the 3 3/4″ x 4 1/4″ Timid Tiger piece to the right of the score line.

Add a piece of Tear-n-Tape along the length of the inside slider piece on the 3/8″ tab to the left of the score line.

Place the inside slider piece to the right hand side of the score line. Peel off the release paper for the Tear-n-Tape.
Fold the front panel down over the slider piece.
Adhere the front stamped panel to the outside of the first panel.

]Open up the first panel and bend the slider piece back towards the inside of the card and use a bone folder to secure the Tear-n-Tape and crease the score line.

Remove the release paper of the two smaller pieces on the last panel.

Fold the right panel over the left hand edge of the slider piece and rub the areas where the Tear-n-Tape is to secure the panel over the slider mechanism.

Now as you open and close the front left hand panel the slider mechanism will slide in and out to reveal you message – cool right?

Just like when you where a little kid create one of these cards and send a hidden message to one of your favorite childhood playmates to remind them of all the fun you used to have as kids!

Here is a short video to show you the mechanism in action!

Now it’s your turn – go and create some interactive artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

words of beauty card

words of beauty card

This mornings card features the Brushed with Beauty Suite Collection of products combined with the All In a Row embossing folder.

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, 4″ x 5 1/4″, scraps for dies
Poppy Parade CS: 2 1/4″ x 3 3/4″

Emboss the layer with the All In a Row embossing folder.
With a Blending Brush create a diagonal colored line across the embossed layer.
Die cut the Basic White scraps with the “because” from the Words of Beauty dies and the flowers from the Petals of Beauty dies. Stamp the “I think you’re amazing” in Memento Black ink in the lower right-hand corner of the Poppy Parade scrap die cut with the Textured Notes die.

Adhere the embossed layer to the card base.

Pop up the Poppy Parade die cut.

Adhere the word “because” above the stamped sentiment. Blend a portion of the petal die. Pop up the petal to the left of the stamped sentiment.

Adhere the holographic resin dots to the card.

This simple card is an easy one and the sentiment is one that would brighten anyone’s day! Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie