creating a scene with dies

creating a scene with dies

Creating a scene with your dies can be so satisfying! The Sunrise Sailing bundle was used to create a lovely seaside scene.

Measurements:
BASE: Coastal Cabana CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
scraps for the boat dies
Basic White CS: (2) 4″ x 5 1/4″
Timid Tiger CS: scrap for the die

Rub Timid Tiger ink with the Blending Brush across the top two thirds of the 4″ x 5 1/4″ Basic White layer.
Rub side to side Strawberry Slush ink with a Blending Brush, creating a sunset sky.
Adhere the Basic White brushed layer to the Coastal Cabana card base.
Emboss the 4″ x 5 1/4″ in the Sunrise Sailing Hybrid Embossing folder.
Tear the seaside bottom of the embossing folder so the waves are all in one piece off the layer.
Adhere the waves embossed part of the layer to the bottom of the colored layer.
Die cut a scrap piece of Timid Tiger CS with the banded circle die from the Spotlight on Nature die set.
Adhere and tuck into the center of the waves embossed layer.
Die cut scraps of Coastal Cabana CS the small and large boat dies.

Adhere the small boat sails onto the boat and place onto the horizon.

Adhere the sails to the large boat and adhere to the middle left-hand side of the water.

Stamp the sentiment to the top left-hand corner of the card.

Adhere Timid Tiger In Color Flat Pearls to finish off the card.

Creating a scene with dies and an embossing folder can be a fun way to design a card – try to create a scene with your dies and create some artwork of your own – one stamp and die at a time!

Happy Stampin’
Natalie

more color mondays – blueberry bushel, pretty in pink and granny apple green

more color mondays – blueberry bushel, pretty in pink and granny apple green

Today’s More Color Mondays color challenge is a triadic color challenge featuring Blueberry Bushel, Pretty in Pink, and Granny Apple Green.

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, scrap for stamping
DSP: 4″ x 5 1/2″
Granny Apple Green CS: (2) 1/2″ x 5 1/2″
Pretty in Pink CS: scrap for die cut

Die cut the Pretty in Pink CS with the Spotlight in Nature dies, stamp in Tuxedo Black a partial image of the roses from the Layers of Beauty stamp set. Stamp the Happy Anniversary sentiment above.
Adhere the Granny Apple Green CS to the edges of the Basic White base. Adhere the Blueberry Bushel DSP in between the Granny Apple Green CS edges.

Adhere the stamped die cut circle on Stampin’ Dimensionals and attach it to the left hand center of the base card.
Stamp the butterfly in Tuxedo Black Memento ink. Color the wings with Blueberry Bushel and Granny Apple Green Stampin’ Blends markers.
Fussy cut the butterfly. Attach the butterfly with Stampin’ Dimensionals.
Adhere two Two-tone Sparkle Gems around the sentiment.

This simple stamping card is an easy way to make a great looking card – try it with your stash and create your own artwork – one stamp at a time!

Happy Stampin’
Natalie

florals in bloom anniversary card

florals in bloom anniversary card

Today is a simple stamping card using two diagonally cut pieces of designer series paper.

Measurements:
BASE: Pretty in Pink CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: (2) 4″ x 5 1/4″ cut diagonally
Flirty Flamingo CS: scrap for die cuts
Basic White CS: scrap for stamping

Adhere the Florals in Bloom DSP to the base card.
Adhere the other piece of DSP to the bottom corner of the base card.

Stamp the anniversary sentiment onto a Flirty Flamingo CS die cut from the Spotlight on Nature. Add Stampin’ DImensionals onto the back of the die cut and adhere above the intersection of the two diagonal pieces of DSP.

Stamp the butterflies from the Spotlight on Nature stamp set in Tuxedo Black Memento ink. Fussy cut the butterfly and add Stampin’ Dimensionals to the back of the butterfly image.
Add the butterfly to the right corner of the Flirty Flamingo die cut.
Add five Iridescent Pearls around the sentiment and card base.

Try this simple design today and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

sunrise sailing mask card

sunrise sailing mask card

We are busy! So please forgive the lateness of this post, I was building some IKEA furniture for my new studio late into the night and this morning and totally forgot to post this!

For those of you that do not know me well., I moved a a small lake town in Pennsylvania three years ago and we gutted a lake front property and designed and build our forever home. We had plans to do it in phases and we finally are almost done with the second phase!
We added on some space to the back of the house to include my dream stamping studio – and we are probably a month out from moving day! I am super excited and will share the project at it’s completion sometime in June/July!

Today’s card is a fun masking technique that I have done before taking a negative space from a die cut and creating a mask from it.

Measurements:
BASE: Cloud Cover CS: 5 1/2″ x 11″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″
scrap for additional masking at least 4 1/2″
wide
Secret Sea CS: scraps for the boat dies

Cut a large circle die – I used my favorite die set the Stylish Shapes dies and cut a circle in the top center of a 4 1/4″ x 5 1/2″ piece of Basic White cardstock.
Place over the 4″ x 5 1/4″ piece.
Using Blending brushes and 3 inks: I used Strawberry Slush, Flirty Flamingo and Gorgeous Grape, blend through the mask creating a sunset circle.
Die cut the larger boat from the Sunrise Sailing die set in Secret Sea CS.
Place the boat where you will be adhering it on the card and stamp the water ripple image in Azure Afternoon ink below the boat.
Using a scrap piece of cardstock that is wider than the Basic White layer, plav=ce it across the paper directly above the ripple stamped image.

Blend with Azure Afternoon ink below the scrap mask or use masking paper!

Adhere the boat to the card above the ripple image.
Stamp the bird images around the sunset in Azure Afternoon ink.
Stamp congratulations from the Sunrise Sailing stamp set on the top of the card layer in Azure Afternoon ink.
Adhere the Basic White layer to the Cloud Cover card base.
Stamp a sentiment on the inside of the card!
Add Basic Rhinestones around the sentiment for the final sparkly touch and you are complete!

Try this simple masking technique today and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – petunia pop, azure afternoon and gorgeous grape

more color mondays – petunia pop, azure afternoon and gorgeous grape

Today’s More Color Mondays color challenge features Petunia Pop, Azure Afternoon, and Gorgeous Grape hues for a bright and cheery birthday card using the single stamp set Simple Birthday!

Measurements:
BASE: Azure Afternoon CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 3 1/2″ x 4 3/4″
Petunia Pop CS: 3 5/8″ x 4 7/8″
Gorgeous Grape CS: 3 3/4″ x 5″

Stamp the Simple Birthday sentiment onto the 3 1/2″ x 4 3/4″ Basic White layer in Tuxedo Black Memento ink.

Using blending brushes on the Basic White layer add a strip of Petunia pop ink with a Blending Brush to the top third of the Basic White layer.
Then add Azure Afternoon ink with a Blending Brush to the middle third of the Basic White Layer.
Add Gorgeous Grape ink with a Blending Brush to the lower third of the Basic White layer.
Place the garden folder of the Glass and Garden mini embossing folder over the middle of the Basic White blended area and emboss with the flower images.
Using a Stampin’ Spritzer filled with water spray the surface of the Basic WHite layer with the Spritzer and dry the splatter effect created when the water lifts the ink color with a Heat Tool.
Adhere the Basic White blended layer to the Petunia Pop layer.
Adhere the layers to the Gorgeous Grape layer.
Adhere the front of the card base with the Garden embossing folder from the Glass and Garden embossing folders, right down the middle of the card front.
Add Stampin’ Dimensionals along the back of the Layered piece and adhere to the back of the card the White 1/4″ ribbon from the Botanical Textures Suite wrapping it around the middle of the card.
Adhere to the Azure Afternoon card front.
Adhere the Two Toned Sparkle Gems to the card front to finish off this lovely and easy Simple Birthday card.

Try this coloring technique with a larger sentiment from your stash and see what fun color combinations you can create – one stamp at a time!

Happy Stampin’
Natalie

beautiful gallery watercolor gate fold card

beautiful gallery watercolor gate fold card

Happy Friday! I am back in PA after settling my youngest in New England for a summer internship and after spending the day cleaning up dry wall dust that is EVERYWHERE! I took a much needed crafting break and created this gate fold watercolor card! Hope you like it!

Measurements:
BASE: Timid Tiger CS: 5 1/2″ x 8 1/2″
scored at 2 1/8″ in from each end
Fluid 100 paper: (2) 1 1/2″ x 5 1/2″
Basic White CS: scraps for die cuts and
sentiment strip and 4″ x 5 1/4″ inside layer

I used a retired block (sorry I forgot that we had retired the I acrylic block) but you can use any size you have on hand!
I added color to the top third of the block by pressing the ink pad directly onto the acrylic block.

I applied Timid Tiger ink directly onto the middle of the acrylic block (it is ok to overlap a darker ink color but you will contaminate the ink pad if you stamp a lighter ink color over an existing darker color!)
I applied Poppy Parade to the bottom of the acrylic block.
I sprayed the acrylic block with water from a Stampin’ Spritzer and placed the two pieces of Fluid 100 paper together and stamped the block of ink directly onto the middle of the papers. I held the block in place for a few seconds to allow the water and ink color to penetrate the fluid 100 Watercolor paper.
Score the base card 2 1/8″ in from each side of the 8 1/2″ side of the card. Fold inward until the two sides meet in the middle – this is called a gate-fold card.
I added the 4″ x 5 1/4″ Basic White layer to the inside of the card.
I stamped an image from the Gallery Blooms stamp set to the bottom of the Basic White layer for a little added interest!
I adhered the Fluid 100 papers right up to the inside edges of the gate fold.

I die cut two images from the Beautiful Motifs die set in scrap Basic White cardstock and adhered one to each side of the gate fold.

I stamped a thank you sentiment from the Beautiful Motifs stamp set in Timid Tiger to the left hand side of the 1″ x 5 1/2″ Basic White strip and added some flower images from the Gallery Blooms stamp set in Crushed Curry to the right hand side.
I adhered only the left hand side of the sentiment piece so that the card will still open.
I adhered three 2025-2027 In Color Flat Pearls in Timid Tiger to finish off the first version of this card.

I decided to add a little sparkle and depth to the card by adding a splatter technique by tapping the brush tip side of the Poppy Parade Stampin’ Blends over the card front.

I brushed the leaves and petals of the two die cuts with Wink of Stella and the wet brush moves a little of the ink color over the dies as well as added a fine sparkle that is gorgeous but subtle and it does not show well in these photos but trust me it is amazing!
Such a fun card and I am glad to be home and crafting again!

Try this fun fold and some of the techniques I shared and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie