elegant leaves easy m fold card

elegant leaves easy m fold card

This fun fold card has a lot of parts and pieces but is very easy to achieve!

The M fold coins it’s name from the M shape that the base card forms when folded!

Measurements:
BASE: Basic White CS: 5 1/2″ x 11″
scored at 4″, 5 1/2″, and 7″, (2) 1″ x 5,
(2) 2 1/2″ x 5″, (2) 1 1/4″ x 2 1/4″, scraps for
dies, scrap for watercolor splattered die
Lemon Lolly CS: (3) 3 3/4″ x 5 1/4″ (2) 1 1/4″ x
5 1/4″, (2) 1 1/2″ x 2 1/2″, scrap for die
DSP: (2) 1″ x 5″, 3 1/2″ x 5″
Pastel Shimmer Specialty paper: scraps for dies

Score the 5 1/2″ x 11″ base at 4″, 5 1/2″ and 7″.

Emboss both 1″ x 5″ Basic White layers and 1 of the 2 1/2″ x 5″ Basic White layers with the Rustic Check 3D embossing folder.

Adhere one of the 1″ embossed layer to the 1 1/4″ Lemon Lolly matte layer.

Adhere the other 1″ to the left side of the 3 3/4″ x 5 1/4″ Lemon Lolly matte and the plain 2 1/2″ x 5″ to the right side of the embossed layer.

On another 3 3/4″ Lemon lolly matte layer adhere the 1″ DSP piece on the left hand side and the 2 1/2″ embossed layer to the left hand side,
Adhere the 3 1/2″ x 5″ DSP to the last 3 3/4″ Lemon Lolly matte.
Adhere the 1″ DSP to the 1 1/4″ Lemon Lolly matte.
Emboss the (2) 1 1/4″ x 2 1/4″ Basic White CS layers with the Rustic Check 3D embossing folder. Adhere them to the 1 1/2″ x 2 1/2″ Lemon Lolly mattes.

Die cut the Pastel Shimmer paper – which is currently on the Last Chance List for $5 – get it before it is gone! – with the whole leaf dies.

Die cut the detailed leaf dies in Basic White CS and adhere the detailed dies over the Shimmer Paper leaves.

Adhere one of the leaves to the right side and one of the leaves to the left side of the other panel.

Stamp a sentiment to a Lemon Lolly die cut.

I attached a left over leaf from a past card that was watercolored and splattered.

Adhere the DSP/embossed layer to the card front.
Adhere the sentiment die with Stampin’ Dimensionals.
Adhere two Pastel Shimmer paper leaves above and below the sentiment focal point.

Look at the Shimmer on that lower leaf – it is stunning! Remember this is ON SALE and on the LAST CHANCE LIST!

Adhere two Pastel Shimmer paper leaves above and below the sentiment focal point.
Add embellishments to the card front.
Adhere the DSP matted layer to the left-hand panel on the inside of the M fold card.
Adhere the embossed matted layer to the second panel.
Adhere the smaller DSP matted panel to the third panel of the onside of the card.
Adhere the embossed and plain Basic White matted layers to the last panel.
Take the small embossed layers and place the one that has the leaf on the left hand side to the top – place adhesive on the right hand side only.
Adhere this to the third panel.
Place the other leaf small embossed layer with the leaf on the right-hand side near the bottom and adhere to the second panel – placing glue or tape only on the left hand edge.
This easy M fun fold is so full of possibilities you could add anything to the little “wings” – how fun!

Try this fun fold with your stash and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

a christmas wish hot foil card

a christmas wish hot foil card

Today’s Hot Foil card features the A Christmas Wish Hot Foil Die – a simple card filled with texture and sparkle.

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, 4″ x 5 1/4″
Secret Sea CS: 4″ x 5 1/4″
Silver Foil CS: 4″ x 5″

Using the Hot Foil System and a Secret Sea cardstock – follow the directions and using Silver Foil Rolls. Die cut the Christmas Wishes sentiment out of the center.
Cut the snowflake into a fun angle.

Adhere the Secret Sea CS onto Silver Foil CS.

Cut the Silver Foil to a 1/8″ border to the Secret Sea CS.

Pop up the Christmas Wishes sentiment onto Stampin’ Dimensionals and place it back in the die space.
Emboss the 4″ x 5 1/4″ Basic White CS layer with the Dreamy Snowflake embossing folder.
Adhere the layer to the Basic White CS layer.
Pop up the Silver Foil and Hot Foil image onto Stampin’ DImensionals and place over the embossed layer.
Place the Adhesive-Backed Snowflakes onto the Secret Sea CS.
Wrap a length of Secret Sea and Gold ribbon around the lower half of the card to finish off this elegant Christmas card!

Try your hand at cutting the main focal image in an angled cut to give a fun twist on the card!
Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin,
Natalie

more color mondays – daffodil delight, pecan pie and old olive

more color mondays – daffodil delight, pecan pie and old olive

Today is a TWOFER! That is two for the price of one – not only is it a fun Fall Color challenge for our weekly More Color Mondays color challenge but it is a sketch challenge also!

This easy card sketch #135 uses the bright and cheery Sunflower Fields DSP and the Sunflower 3D embossing folder which is one of my ALL -Time Favorite folders and I am said to say that it has moved onto the LAST CHANCE LIST! Do not wait this is one of those folders you will be sad you did not get – the detail is gorgeous and it WILL NOT LAST LONG (I predict)!

Measurements:
BASE: Daffodil Delight CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 1 1/4″ x 2 3/4″
Basic White CS: 4″ x 5 1/4″
Old Olive CS: 1 3/8″ x 3″
Pecan Pie CS: 1 3/4″ x 3 3/4″
DSP: (3) 1″ x 4″

I am SO SAD to see this embossing folder go – it is one of my ALL TIME favorites – if this is one that you have admired DO NOT WAIT it has moved onto the LAST CHANCE LIST and I do not think this will last long!

emboss the Basic White layer with the Sunflower 3D embossing folder.

Adhere the embossed layer onto the card front of the Daffodil Delight card base.
Take (3) 1″ x 4″ pieces of Sunflower Fields DSP and start on one side and adhere the DSP strip down.
TIP: Whenever I adhere strips across a layer or card surface I ALWAYS adhere the two side strips and then position the center strip last – this is the easiest way to evenly space the strips. Adhere down the strip on the opposite side second.
Adhere the center DSP strip last this way you can position it evenly between the two side strips!
Stamp the Happy Birthday sentiment in Black ink on the Daffodil Delight small layer from the Framed and Fabulous stamp set from the NEW Hot Foil Release of products this sentiment set is so awesome even if you do not have the Hot Foil system this set is an all purpose sentiment set with great circle dies as well as the Hot Foil dies!
I added three Darling Duckling Flat Pearls from the 2025-2027 In Color Flat Pearls embellishments set and popped up the sentiment onto Stampin’ Dimensionals.
I added it to the card front over the three strips of DSP.

This is one of the cards we are making in my October card class – join us for the last two sessions on Tuesday the 13th in Greenville PA at the library from 4:30pm – 6:30pm – RSVP directly to the library at 724-588-5490 or on Tuesday the 20th at the Linesville PA library from 2-4 pm RSVP to the library directly at 814-683-4354.

This is the stepped up version I double matted the sentiment layer with Old Olive CS and Pecan Pie CS to make it pop a little bit more!

Try this simple stampin’ sketch and see what you can create from your stash – one stamp at a time!

Happy Stampin’
Natalie

frosted pinecone spanner card

frosted pinecone spanner card

It’s wild to think that you can take a standard card and with two simple cuts you can create a WOW card. Same dimensionals – TOTALLY different results!

The spanner card starts out as a standard card and then something magical happens with two cuts! Stick around and I will show you how to make this fun fold card!

Measurements:
BASE: Pecan Pie CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Pecan Pie Two-toned CS: (4) 3/4″ x 5 1/4″
Basic White CS: 3 1/4″ x 4″, 1/2″ x 5 1/2″

Score the card base at 4 1/4″.

Place the right-hand edge of the card at 1″ (on the right-hand side of the cutting track) with the top of the card at the top of the Stampin’ Trimmer upper edge and the score line in the middle.

Place the cutting blade at the score line and cut upwards to the top edge of the card at 1″ in.

Move the card base to the right so that the left-hand edge aligns to the 1″ mark at the left hand side of the cutting track.

Place the cutting blade in the score line and cut upwards to the top of the card base.

Move the left-hand edge to the

Take your four 3/4″ pieces of Two-tone cardstock and emboss two of them on the light side in the 3D Textured Tree Ring embossing folder.

Take the other two strips and stamp the splatter image on the light side in Pecan Pie ink.

Adhere the two stamped strips about 1/8″ in on the inside of the card base leaving 1/8″ even border on the sides and top and bottom of the card. Adhere to both sides of the inside of the card (these strips will be hidden underneath the top flaps when the card is closed.)
Blend the diagonal edges of one of the Basic White 3 1/4″ x 4″ pieces and adhere to the middle of the inside of the card base.
Stamp the inside sentiment in Pecan Pie ink to the center of this inside Basic White layer.
Adhere the two embossed strips of Two-tone CS to the front outside panels leaving an even 1/8″ border on top, bottom and sides.
Using the Stampin’ Positioner because of the large stamp image of the pinecone, take the second Basic White 3 1/4″ x 4″ layer and position the layer under the pinecone stamp in the Stampin’ Positioner.

Add Pecan Pie ink to the stamp and stamp onto the Basic White layer.

Using a water painter wet the brush and drawing from the stamped lines inward draw the ink into the pinecone and stem to watercolor the image.

Using a blender pen, dip the tip into the lid of the Peaceful Pine ink pad with ink on it and use the pen like a colored marker and draw over the pine needle images.

Using blending brushes blend the edges of the pinecone layer with Peaceful Pine and Pecan Pie inks.

Using a White Gel pen I added white lines above the Peaceful Pine marker lines to look like a snow effect!

Adhere the pinecone image layer to the center front panel.
Take the 1/2″ strip and stamp a straight line sentiment across the middle of the strip in Pecan Pie ink.

Blend the edges in Pecan Pie ink and a blending brush.

Add adhesive ONLY 3/4″ in from the outside edges and secure over the two outside panels of the card – this creates a “spanner” piece to connect the two outside panels to act as one unit and “span” the gap leaving the middle panel to become another layer to the card!

This is what the card looks like when you lift the first spanner layer open to reveal layer number 2 which is the card front’s original middle panel!
Adhere three embellishments to the spanner strip and this WOW card is completed!

Try making a spanner card soon with your own stash and see how easy it is to make something special! Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

sneak peak – november online exclusives – sunray embossing folder card

sneak peak – november online exclusives – sunray embossing folder card

Today’s post is my new card sketch challenge and it is the simplest add a layer and a sentiment focal point and I am sneak peaking some of the November Online Exclusive products that caught my eye and I HAD to pre-order to show you!

Measurements:
BASE: Crushed Curry CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, scrap for round die cut
Basic White CS: 4″ x 5 1/4″

Emboss the Basic White layer in the NEW standard Sunray Embossing folder using the Stampin’ Cut and Emboss machine with the BASE #1 plate and sandwich the paper and embossing folder in between two #3 Cutting Plates.
Open up the Crushed Curry ink pad and angle so the edge of the pad is touching the top edge of the embossed layer.
Drag the ink pad edge over the raised embossed areas of the layer and add ink to the surface.
Die cut a scrap of Crushed Curry CS with the medium Spotlight on Nature dies circle and stamp the sentiment from the UPCOMING November Online Exclusive sentiment only stamp set YOU ARE LOVED this is an AWESOME set of sentiments and has one that pairs PERFECTLY with the Sunray embossing folder!
Pop up the circle die onto the center fo the sunray embossed layer.
Adhere the embossed layer to the Crushed Curry cardstock card front.
Adhere some In Color Dots to the front of the card to finish off this SUPER EASY card sketch sneak peak card!

Get ready for some great product releases and look for the AWESOME October Product of the Month release the Shining Star dies $5 with a qualifying $75 order! These are AMAZING!!

Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Reminder because the stamp set and embossing folder are not available until November to customers it will not appear below in the photo links

They are however available on a starter kit order and there is a EXTRA $50 starter kit special going on now until the end of the month!

More Color Mondays – golden glow, hydrangea hue and crisp cantaloupe

More Color Mondays – golden glow, hydrangea hue and crisp cantaloupe

Today’s More Color Mondays features three of the most recent In Colors: Golden Glow, Hydrangea hue and Crisp Cantaloupe and one of my favorite new bundles: Elegant Leaves tamps and dies!

This fun fold is super easy and such a great reveal!

Measurements:
BASE: Crisp Cantaloupe CS:5 1/2″ x 7 1/2″
scored at 3 1/4″
Front Flap CS: 2 1/2″ x 5 1/2″
scored at 4 3/4″
Basic White CS Inside: 4″ x 5 1/4″
DSP front piece: 3″ x 5 1/4″
DSP inside piece: 1″ x 5 1/4″
Front Flap Embossed CS: 2 1/4″ x 4 1/2″

Adhere the 1″ piece of DSP to the right-hand side of the Basic White layer.
Stamp the sentiment on the inside Basic White CS piece in Crisp Cantaloupe ink.
Take the Front flap piece and score at 4 3/4″ adhere the small tab at the top of the flap so the score line is just slightly above the center of the top inside edge of the card.
Placing it just slightly above the top edge will allow the flap to close over the front of the card and lay flat.
Adhere the Basic White layer to the inside of the card covering the tab of the front flap.
Adhere the larger DSP piece to the front of the card base.
Take the 2 1/4″ x 4 1/2″ Crsip Cantaloupe CS piece and emboss with the Softly Woven 3D embossing folder and adhere to the outside of the front flap.
Cut the three detailed leaf dies in Basic White CS and the three outline leaf dies in different colors of the 2026-2028 In Color Gingham DSP.
Glue the detailed Basic White CS leaves to the coordinating Gingham image.
Cut a 1 1/4″ x 2 1/2″ scrap of one of the In Colors and a 1″ x 2 1/4″ scrap of Crisp Cantaloupe.

Stamp the thank you sentiment in Crisp Cantaloupe ink to the Crisp Cantaloupe CS and run through the Stampin’ Cut and Emboss machine with the tree ring die.

Adhere to the colored matte.

Pop up the sentiment piece hanging off of the edge of the front flap and start to arrange the leaves around the sentiment piece.
Adhere the rest of the leaf dies to the card around the sentiment piece.

Add 2026-2028 In Color Dots around the sentiment.

I decided to try the sentiment matte in Hydrangea Hue to make the sentiment piece pop a little more – Which one do you like better?

Sometimes changing one little accent piece can make all the difference!

Try this fun fold with your stash – now it’s your turn! Go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie