more color mondays – crumb cake, balmy blue and summer splash sneak peak

more color mondays – crumb cake, balmy blue and summer splash sneak peak

When I saw this stamp set in the Online Exclusives pre-order release I knew I would love it – I am a water baby and love the waves and the lake that I live on! So this set was perfect. These are coming in the new Online Exclusive product release in March – so this is a sneak peak!

This card is a center flap fun fold and so super easy but I LOVE the effect!

Measurements:
BASE: Crumb Cake CS: 4 1/4″ x 11″ scored at
5 1/2″ and cut from the score line down the
front from 1″ from either side.
Balmy Blue CS: 2 1/4″ x 4 1/2″
Basic White CS: 4 1/4″ length scraps for die cuts
2″ x 5 1/4″, scraps for the umbrella die cuts
DSP: 1 1/2″ wide scraps for beach towel

I stamped the water image on the Balmy Blue CS layer by stamping off first on my grid paper and then multiple times on the Balmy Blue to add motion and texture.

I used Balmy Blue ink and a blending brush on a scrap of 4 1/4″ wide Basic White CS.
I layered Summer Splash ink over the Balmy Blue blended area to add layers of color to the wave die.
I die cut the foam die out of Basic White CS and the wave area out of the blended Basic White colored cardstock.
I adhered the White foam to the blended area.
I adhered those wave pieces to the Balmy Blue stamped layer.
I cut the Crumb Cake base at 1″ from each side of the front of the card of the 4 1/4″ x 11″ cardstock base from the score line at the top of the card to the opening on the front section only.

I cut the wave layers to 4 1/4″ inches wide and then at 1″ from each side to create three piece.

I stamped the sand image on the three front panels of the card front in Crumb Cake ink just above where the waves will be adhered.
I adhered the three wave layers to the bottom of the card front panels.
I adhered the two side panels down to the back panel of the card.
I stamped the starfish on each corner in Crumb Cake ink and Happy Birthday sentiment in the middle in Summer Splash ink and adhered it to the middle in between the two wave panels.
I cut a 1 1/2″ piece from the Splash of Sparkles DSP and cut fringe on it end for the beach towel and saved a thin strip for the front sentiment.

I die cut the umbrella solid image in Basic White CS and the striped umbrella in Summer Splash and Basic White and alternately adhered the bands to the solid umbrella.

I adhered both to the middle front panel hanging off both sides being careful to only glue the center portions.

I stamped the sentiment on a thin strip of DSP and added it to the front.

I popped up the umbrella on Stampin’ Dimensionals on the left side only and therefore popped up the sentiment on the left side and glued it directly to the umbrella on the right side to make up the height differential.

Using the Stampin’ Blends alcohol marker Summer Splash Dark I colored five Iridescent Pearl embellishments for the card.
I adhered the pearls to the card front.
I adhered two clusters on the outside panels so you can see the pearls when the card is open and closed!
I love this simple fun fold and I LOVE this new stamp set.

Try this new stamp set when available or play with the ones you already own and create something today to warm up your day – one stamp at a time!

These stamps and dies will be released in the new Online exclusives release in March they are currently only available to demonstrators and in the starter kit so they will not be listed in the photo links below!

Happy Stampin’
Natalie

new catalog sets demonstrator swap cards

new catalog sets demonstrator swap cards

One of the benefits of swapping with other crafters is that you receive back the same number of cards that you made but they are from all different stamp sets (possibly sets you do not own – which is the case for a few of these samples) and you get new ideas, Sometimes it is a new color combination or a new fun fold or a new technique. mostly it is just plain fun to see other people’s style and how they use their stamps and products!

This first card is from Denise W. who is one of my upline’s and hosts this swap every month! This is the adorable Wooly Friends Bundle and uses the Love Notes Mix and Match Designer Series paper and the Three Banner punch to punch out the DSP. Such a sweet card!

This next card is from Kathi D. and is made using the Easter Joy Suite of products including the Easter Basket Bundle and the Easter Joy Specialty Designer Series paper.
Nancy F’s swap card uses a set that I do not have but thought was so so pretty and she does an awesome job with the Aspen Grove stamp set. She uses the Faux Bronze Pentagons from the Nature walk Suite Collection of products and the sentiment from the Loveliest Trees stamp set!

This is a window card. The second picture shows the card from the inside view.

This Greenery Lane bundle card from Carol S. uses the Stone and Vine 3D embossing folder as the backdrop for this lovely neutral card. She used the dies and stamps from the Greenery Lane bundle as well as the washi tape for the strip on the left hand side of the card.
The last card I have received from this swap is from Lori V and is a bendy fun fold card using the Nature Walk Suite of products.

I will design my own card with this fun fold next week so if you want to learn how to make this keep an eye out for the post!

Here are three pictures of the card from various angles.

This is the card from the top view you can see the bendy portion.

Stay tuned for my version coming soon!

Hope you got a lot of great ideas – now it’s your turn to go and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

Product List
Paper Snips
[103579]
$12.00
more color mondays – petunia pop, peach pie and summer splash

more color mondays – petunia pop, peach pie and summer splash

Today’s More Color Mondays color challenge features some very cool new stamp sets, plus did you wonder where Sale-a-bration had gone?
Well, let me. tell you about that! This past year Stampin’ Up! announced to the demonstrators that they were developing a program to replace Sale-a-bration called the Product of the month promotion!

So instead of just two months of sales items to get for FREE with a qualifying over they are doing a YEAR LONG promotion for every month that a demonstrator or customer spends $75 they are eligible to buy one Product of the Month per that month for $5. Today’s card is made with January’s incentive “fabulous Sayings” stamp set! This is the coolest stamp set with the coolest fonts!

Measurements:
BASE: Summer Splash CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 1 1/2″ x 4 1/4″
Basic White CS: 4″ x 5 1/4″, 1 1/4″ x 4″

This card is also made with the new Mini Catalog stamp set Shell Collecting – this is a reversible stamp set! This means if the image is symmetrical you can turn the stamp over and stamp the backside that is the flat side – I always stamp that off on my grid paper so that the background is lighter than the detailed side at full strength!

For the non-symmetrical stamps this Shell Collecting stamp set have reversed images and the non-symmetrical stamps. Use the backside of one and the front detailed side of the other to get both sides!

I stamped the conical shell detailed stamp in Petunia Pop ink full strength.

This particular shell is not symmetrical so I took the other conical shell and turned it so that the flat side was upwards and stamped it into the Petunia Pop ink and stamped it off once on the grid paper, then I stamped it over the detailed image for a filled in look!

I then stamped the starfish image in Peach Pie ink.

The starfish image is symmetrical so there is only one starfish in the collection so I turned the starfish over and stamped off so that the inside filled portion is lighter.

Then I stamped the larger shell in Summer Splash ink.

I also used the January POM (Product of the Month) that I explained in the intro of this blog post – the January selection is called Fabulous Sayings and it is a fantastic sentiment stamp set. I stamped the Happy Birthday from this Product of the Month in Summer Splash ink on the Basic White strip.

Since there are two stamped images of the larger sea shell these are non symmetrical and you will use the detailed side of one and the flat backside of the other stamp. I used the other flat backside at half strength to fill in the background of the shell.
Finish the Basic White layer by alternating colors and shells to completely fill the page.

Take the layer and emboss it with the Soft Waves 3D embossing folder.

Take and adhere the Basic White sentiment strip to the Summer Splash matte strip.
Adhere the embossed layer to the card base and then pop up the sentiment strip across the card front.

I added two silver faceted snowflake embellishments – I know these are snowflakes but they look like stars or starfish to me as well!

The Product of the Month promotion is ONLY while supplies last – so make your supply list and get your order in if this is the set for you!

Below is a picture of the set – it is a great one and it’s only $5 with a qualifying order of $75!
Best $5 I have spent recently!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

words of beauty card

words of beauty card

This mornings card features the Brushed with Beauty Suite Collection of products combined with the All In a Row embossing folder.

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, 4″ x 5 1/4″, scraps for dies
Poppy Parade CS: 2 1/4″ x 3 3/4″

Emboss the layer with the All In a Row embossing folder.
With a Blending Brush create a diagonal colored line across the embossed layer.
Die cut the Basic White scraps with the “because” from the Words of Beauty dies and the flowers from the Petals of Beauty dies. Stamp the “I think you’re amazing” in Memento Black ink in the lower right-hand corner of the Poppy Parade scrap die cut with the Textured Notes die.

Adhere the embossed layer to the card base.

Pop up the Poppy Parade die cut.

Adhere the word “because” above the stamped sentiment. Blend a portion of the petal die. Pop up the petal to the left of the stamped sentiment.

Adhere the holographic resin dots to the card.

This simple card is an easy one and the sentiment is one that would brighten anyone’s day! Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – pretty peacock, blackberry bliss and crumb cake

more color mondays – pretty peacock, blackberry bliss and crumb cake

I wanted to create some fun background papers for this card so I took each of the challenge colors and did the same technique with each (I only have pictures of the Pretty Peacock version)

The first thing I did was blend color onto a 4″ x 5 1/4″ layer of Basic White CS with a Blending Brush.

Next I placed a drop of Ink refill in the lid of the ink pad and dipped the wide Water Painter into the ink and liquified it with extra water.

I splattered the ink onto the layer that was set on my glass mat.

Do not disturb the over splatter it will be used in the next step of the technique!

I then moved the layer and sprayed the over splatter with a Stampin’ Spritzer filled with water.

I turned the layer blended color side down on the glass matte surface over the water and patted the layer down to absorb the water – I moved the layer around to wet different portions of the layer in the over splattered water.

Allow the layer to dry.

I repeated this step with the other two colors of ink – Blackberry Bliss and Crumb Cake.

I cut the Crumb Cake layer into 1 1/2″ x 4″ strips and added it to the Crumb Cake card front.

I forgot to take pictures of the next steps – so sorry! I stamped the large leaf image from the Nature’s Symphony stamp set in Pretty Peacock ink and then cut them out with the corresponding die.

I cut the large leaf die from the Blackberry Bliss colored layer.

I cut a circle die from the Spotlight on Nature dies in Crumb Cake CS and stamped the “you make me smile” sentiment in Pretty Peacock ink.

I arranged the Blackberry bliss dies and the stamped Pretty Peacock leaves under the sentiment circle. I popped the circle up on Stampin’ Dimensionals and finished arranging the leaves in a loose cluster around the card!

I added 5 Faceted Snowflakes in the pretty Peacock hue to finish the card with a sweet color coordination – I think the snowflakes look like stars and loved the faceted look it gave this card!

I hope this inspires you to try this fun background technique and see what you can create – one stamp at a time!

Happy Stampin’
Natalie

double front flap fun fold card – boardwalk fun bundle

double front flap fun fold card – boardwalk fun bundle

Happy New Year! Normally I post on Monday-Wednesday – Friday of each week but I wanted to wish you all a great and creative NEW YEAR! Happy 2026 – can you believe it’s another new year? They seem to come faster and faster these days LOL!

Today’s card is a very simple double front flap fun fold card! Follow along and learn how to make one of your own!

Measurements:
BASE: Pretty in Pink CS: 5 1/2X 8 1/2″
scored at 4 1/4″
Bubble Bath CS: 3 1/2″ x 4 3/4″
Flirty Flamingo CS: 3 1/4″ x 4 1/2″
DSP: 3″ x 4 1/4″
Basic White CS: 1″ x 3 1/4″, 4″ x 5 1/4″

Thanks to Juli B. for the initial inspiration. I am using the Beach Boardwalk Suite Collection of products and just a reminder these will be available in this coming Tuesday and will not be able to be included in my photo links below until after their release to the general public. These are available in a starter kit and to active demonstrators currently!

Take the BASE and score in the center at 4 1/4″ then cut 1 1/4″ off the left-hand edge.
Score the 1 1/4″ cut piece at 3 1/2″.
Glue the smaller tab with Multipurpose liquid glue and match the score line up with the edge of the BASE paper’s right-hand edge. Adhere down at the level you want it to swing over the front.
Emboss the front flap – this could have been done at the beginning as well. I used the Beautiful Patterns 3D embossing folder which is an Online Exclusive from the Brushed with Beauty Suite.
Stamp the Celebrate on the right-hand edge of the 1″ Basic White piece and the Happy Birthday in the center of the 4″ Basic White layer in Pretty in Pink ink.
Adhere the 4″ Basic White layer on the inside of the card base to cover the Pretty in Pink flap insert.
Add ribbon in a knot around the left-hand edge of the 1″ Basic White piece and adhere to the small flap.
Adhere the DSP to the Flirty Flamingo layer and then adhere those to the Bubble Bath layer.

Adhere that flap layer to the card front being careful to measure where you want to adhere – sometimes I eyeball that but if you are uncertain you can place the layer where you want it and add a sticky note to the back edge then you will know where to place the glue only on the right-hand side of the sticky note and you will not inadvertently glue your card together!

I added three Pretty in Pink 2024-2026 In Color Flat Pearls (LOL – I actually added the 2025-2027 Strawberry Slush Pearls because that is what I had but the worked great with a slightly darker pink hue – use what you have!) to the card front for a coordinated bit of bling to finish this fun birthday card.

I always have a tendency in the winter especially after a large snow storm to make wistful summery cards – so here is your little bit of sunshine for today instead of all this snow outside my Stampin’ Studio!

Now go and create something fun today for the first day of the new year – one stamp at a time!

Happy Stampin’
Natalie