more color mondays – pretty peacock, granny apple green and misty moonlight sneak peak

more color mondays – pretty peacock, granny apple green and misty moonlight sneak peak

Today’s More Color Mondays color challenge features the new $5 Product of the Month called Painted Illusions! (look at the artistic designs below) This paper is gorgeous and I selected the colors based on the DSP!

This is a super simple, fun fold that is fun to make called the Split Front card.

Measurements:
BASE: Pretty Peacock CS: 4 1/4″ x 11″
scored at 5 1/2, cut at 1 1/2″ then again at
2 1/2″
DSP: 4″ x 5 1/4″
Basic White CS: (2) 4″ x 5 1/4″

Cut 1 1/2″ off the bottom of the card front.

Then cut another 2 1/2″ off the same side.

You will end up with 1 1/2″ on the top of the card front below the score line and two cut pieces.

Cut 1 1/4″ off each side of the DSP.
Attach the Top piece of the design to the cardstock still attached to the card front.
Adhere the bottom 1 1/4″ piece to the first piece cut off the card.
I cut 1/4″ piece off the middle piece of DSP and added that to the bottom of the inside Basic White 4″ x 5 1/4″ layer.

Then I adhered the middle piece of of DSP to the second piece cut off the card front.

Place the bottom matted piece aligned to the bottom of the card base and twist the middle piece and add Stampin’ Seal or Tear & Tape to only the top and the bottom and attach the middle piece vertically between the top and bottom matted pieces.
I took the second piece of Basic White layer and cut three dies from the upcoming March Online Exclusive bundle Springtime Scenes! This is a SNEAK PEAK and will not be available for a couple more weeks therefore it will not be listed below in the photo click-ables at the end.
Using Granny Apple Green and Pretty Peacock ink and blending brushes I colored the dies and stamped the sentiment from this upcoming set in Pretty Peacock ink.
I adhered the left side only of the die cut circle and placed it on the middle DSP piece hanging over the open edge.

I popped up the leaf and adhered the sentiment piece under it careful to not adhere the part that would hang over the open edge on the left.

I added three Sparkle Dot Essentials in the green color to add some bling and this simple card is complete!

Try this simple fun fold today and go create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – crumb cake, balmy blue and summer splash sneak peak

more color mondays – crumb cake, balmy blue and summer splash sneak peak

When I saw this stamp set in the Online Exclusives pre-order release I knew I would love it – I am a water baby and love the waves and the lake that I live on! So this set was perfect. These are coming in the new Online Exclusive product release in March – so this is a sneak peak!

This card is a center flap fun fold and so super easy but I LOVE the effect!

Measurements:
BASE: Crumb Cake CS: 4 1/4″ x 11″ scored at
5 1/2″ and cut from the score line down the
front from 1″ from either side.
Balmy Blue CS: 2 1/4″ x 4 1/2″
Basic White CS: 4 1/4″ length scraps for die cuts
2″ x 5 1/4″, scraps for the umbrella die cuts
DSP: 1 1/2″ wide scraps for beach towel

I stamped the water image on the Balmy Blue CS layer by stamping off first on my grid paper and then multiple times on the Balmy Blue to add motion and texture.

I used Balmy Blue ink and a blending brush on a scrap of 4 1/4″ wide Basic White CS.
I layered Summer Splash ink over the Balmy Blue blended area to add layers of color to the wave die.
I die cut the foam die out of Basic White CS and the wave area out of the blended Basic White colored cardstock.
I adhered the White foam to the blended area.
I adhered those wave pieces to the Balmy Blue stamped layer.
I cut the Crumb Cake base at 1″ from each side of the front of the card of the 4 1/4″ x 11″ cardstock base from the score line at the top of the card to the opening on the front section only.

I cut the wave layers to 4 1/4″ inches wide and then at 1″ from each side to create three piece.

I stamped the sand image on the three front panels of the card front in Crumb Cake ink just above where the waves will be adhered.
I adhered the three wave layers to the bottom of the card front panels.
I adhered the two side panels down to the back panel of the card.
I stamped the starfish on each corner in Crumb Cake ink and Happy Birthday sentiment in the middle in Summer Splash ink and adhered it to the middle in between the two wave panels.
I cut a 1 1/2″ piece from the Splash of Sparkles DSP and cut fringe on it end for the beach towel and saved a thin strip for the front sentiment.

I die cut the umbrella solid image in Basic White CS and the striped umbrella in Summer Splash and Basic White and alternately adhered the bands to the solid umbrella.

I adhered both to the middle front panel hanging off both sides being careful to only glue the center portions.

I stamped the sentiment on a thin strip of DSP and added it to the front.

I popped up the umbrella on Stampin’ Dimensionals on the left side only and therefore popped up the sentiment on the left side and glued it directly to the umbrella on the right side to make up the height differential.

Using the Stampin’ Blends alcohol marker Summer Splash Dark I colored five Iridescent Pearl embellishments for the card.
I adhered the pearls to the card front.
I adhered two clusters on the outside panels so you can see the pearls when the card is open and closed!
I love this simple fun fold and I LOVE this new stamp set.

Try this new stamp set when available or play with the ones you already own and create something today to warm up your day – one stamp at a time!

These stamps and dies will be released in the new Online exclusives release in March they are currently only available to demonstrators and in the starter kit so they will not be listed in the photo links below!

Happy Stampin’
Natalie

layers of beauty – lovely color combination

layers of beauty – lovely color combination

I chose the Layers of Beauty bundle and masks for my February swap card for my demonstrators group and this is the card I came up with. The colors are a soft subtle palette with the flower petals layered with Bubble Bath, Petunia Pop and Blackberry Bliss, with a dash of Lemon Lolly in the daisy flower centers and Gray Granite and Lost Lagoon for the leaves. I paired that with the Textured Metallic Specialty paper for a beautiful card.

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, (2) 4″ x 5 1/4″, 3 3/4″ x 5″
Textured Metallic DSP: scrap for sentiment
matte and word die

Stamp the large floral image on one of the 4″ x 5 1/4″ layers in Memento Tuxedo Black ink.

Take mask #1 from the layers of Beauty masks set and secure it over the image. Use a blending brush and color in the openings with Bubble Bath ink.

Place #2 mask over the floral image and secure with tape.

Use another blending brush and Petunia Pop ink in the openings of mask #2.

For mask #3 use the Blackberry Bliss ink and a blending brush.
Clean mask #3 with water and use Lemon Lolly ink and another blending brush on just the daisy centers.

Use Gray Granite ink for mask #4.
Finally use mask #5 with the Lost Lagoon ink.
The finished masked product is something lovely and easy to reproduce!
Die cut the floral image out.
I cut the large image into 4 different pieces to lay around the sentiments.
Emboss the 3 3/4″ x 5″ layer with the Timber 3D embossing folder.
Adhere the embossed layer to the other 4″ x 5 1/4″ layer.
Die cut the word die “just” from the words of Beauty die set in the Textured Metallic Specialty paper.

Die cut the matte sentiment piece from the Words of Beauty in the Textured Metallic Specialty paper.

Die cut the smaller sentiment piece that fits in the matte piece you just cut from a Basic White scrap.

Using Versamark ink stamp the word LOVELY from the Words of Beauty stamp set and heat emboss with WOW silver embossing powder and a heat tool.
I adhered the single rose piece to the right-hand bottom corner of the embossed layers.
I popped up on Stampin’ Dimensionals the larger two rose colored piece to the left-hand upper corner.
I tucked the daisy piece under the two rose piece and adhered it down to the embossed layer.
I adhered the lovely sentiment heat embossed piece to the textured metallic matte and then popped it up on mini Stampin’ Dimensionals and adhered it to the left-hand lower corner.
I adhered the “just” die cut and dot for the J over the lovely sentiment piece.
Adhere the layers onto a Basic White CS base.
I adhered five Basic Rhinestone Jewels to the card front.
And last but not least I slipped the little curly cue of floral buds under the lovely sentiment piece to finish off the card!

I love coloring this set it is so gratifying!

Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – petunia pop, peach pie and summer splash

more color mondays – petunia pop, peach pie and summer splash

Who says masculine cards need to be neutral or muted colors – this More Color Mondays color challenge card was made for a special birthday that is today in our family!

The Shell Collecting stamp set is a reversible stamp set – it contains 6 symmetrical stamps that can be reversed directly to be used as a two step stamping process and 2 other images that contain mirrored images of each other and you can use the flat sides of the mirror image for the reverse stamping for each of those stamps! So fun to be able to fill in the background without coloring – just ink it up and go!

Measurements:
BASE: Summer Splash CS: 5 1/2″x 8 1/2″
scored at 4 1/4″, 1 1/2″ x 4 1/4″
Basic White CS: 4″ x 5 1/4″, 1 1/4″ x 4″

I started on the corner of the Basic White CS layer with the conical shell in Petunia Pop – this is one of the two images that has two mirrored images I used the back of one and the front of the other image to two step stamp.

In the second photo I stamped the fill in portion of the conical stamp and also stamped the starfish which is a symmetrical stamp and is totally reversible on it’s own in Peach Pie ink.

I reversed the starfish on the acrylic block to the smooth side and stamped off once on my grid paper creating a lighter second generation stamping effect for the Peach Pie inked starfish.

Then I stamped the conch shell which has two mirrored images in the stamp set in Summer Splash ink.

I also stamped Happy Birthday from the January POM (Product of the Month) Fabulous Sayings in Summer Splash on the 1 1/4″ Basic White layer.

I took the flat side of the mirrored image conch shell and stamped off on grid paper two make the fill in lighter in Summer Splash ink.
I matted the happy birthday sentiment in Summer Splash CS.
I finished the 4″ x 5 1/4″ layer by stamped the entire surface with alternating colors and shell types.

Then I ran it through the Stampin’ Cut and Emboss machine with the BASE #1 plate and the Embossing Plate #4 with the Soft Waves 3D embossing folder.

I adhered the 4″ x 5 1/4″ layer to the card base and the adhered the sentiment matted layer across the top third of the card. I added two silver Faceted Snowflakes around the sentiment to finish off the card!
Try one of our super fun reversible stamp sets today this one is amazing!

Now go and create some artwork of your very own one stamp at a time!

Happy Stampin’
Natalie

more color mondays – petunia pop, peach pie and summer splash

more color mondays – petunia pop, peach pie and summer splash

Today’s More Color Mondays color challenge features some very cool new stamp sets, plus did you wonder where Sale-a-bration had gone?
Well, let me. tell you about that! This past year Stampin’ Up! announced to the demonstrators that they were developing a program to replace Sale-a-bration called the Product of the month promotion!

So instead of just two months of sales items to get for FREE with a qualifying over they are doing a YEAR LONG promotion for every month that a demonstrator or customer spends $75 they are eligible to buy one Product of the Month per that month for $5. Today’s card is made with January’s incentive “fabulous Sayings” stamp set! This is the coolest stamp set with the coolest fonts!

Measurements:
BASE: Summer Splash CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 1 1/2″ x 4 1/4″
Basic White CS: 4″ x 5 1/4″, 1 1/4″ x 4″

This card is also made with the new Mini Catalog stamp set Shell Collecting – this is a reversible stamp set! This means if the image is symmetrical you can turn the stamp over and stamp the backside that is the flat side – I always stamp that off on my grid paper so that the background is lighter than the detailed side at full strength!

For the non-symmetrical stamps this Shell Collecting stamp set have reversed images and the non-symmetrical stamps. Use the backside of one and the front detailed side of the other to get both sides!

I stamped the conical shell detailed stamp in Petunia Pop ink full strength.

This particular shell is not symmetrical so I took the other conical shell and turned it so that the flat side was upwards and stamped it into the Petunia Pop ink and stamped it off once on the grid paper, then I stamped it over the detailed image for a filled in look!

I then stamped the starfish image in Peach Pie ink.

The starfish image is symmetrical so there is only one starfish in the collection so I turned the starfish over and stamped off so that the inside filled portion is lighter.

Then I stamped the larger shell in Summer Splash ink.

I also used the January POM (Product of the Month) that I explained in the intro of this blog post – the January selection is called Fabulous Sayings and it is a fantastic sentiment stamp set. I stamped the Happy Birthday from this Product of the Month in Summer Splash ink on the Basic White strip.

Since there are two stamped images of the larger sea shell these are non symmetrical and you will use the detailed side of one and the flat backside of the other stamp. I used the other flat backside at half strength to fill in the background of the shell.
Finish the Basic White layer by alternating colors and shells to completely fill the page.

Take the layer and emboss it with the Soft Waves 3D embossing folder.

Take and adhere the Basic White sentiment strip to the Summer Splash matte strip.
Adhere the embossed layer to the card base and then pop up the sentiment strip across the card front.

I added two silver faceted snowflake embellishments – I know these are snowflakes but they look like stars or starfish to me as well!

The Product of the Month promotion is ONLY while supplies last – so make your supply list and get your order in if this is the set for you!

Below is a picture of the set – it is a great one and it’s only $5 with a qualifying order of $75!
Best $5 I have spent recently!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

card sketch #117

card sketch #117

Today’s card continues the series on Card Sketches with #117!

This simple sketch provides plenty of creative inspiration with a layer and a double matte with sprigs behind it. I followed the sketch quite literally but later on next week I will show you another card from this same sketch with a completely different look!

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4″ x 5 1/4″ layer, and scrap
for the die
Vellum CS: scrap for the sentiment matte
Lemon Lime Twist CS: 1/2″ x 4″, and scrap for
the die

Emboss the Basic White CS layer with the Stone and Vine 3D embossing folder.
Adhere the embossed layer to the card base.
Take the 1/2″ x 4″ Lemon Lime Twist CS strip and adhere it to the center of the card front.
Die cut two concentric circles from the Spotlight on Nature dies. The smaller one in Basic White CS and the next size up in Vellum CS.

Stamp the sentiment in Lemon Lime Twist ink and color the edges with a blending brush and the same ink.

Adhere the Basic White stamped circle onto the vellum circle with Stampin’ Seal.

Pop up the sentiment vellum circle with Stampin’ Dimensionals – making sure to stay inside the Basic White circle outline.
Die cut the large leaf sprig die in Lemon Lime Twist cardstock and cut into 2 pieces.
Attach the sprigs to the sentiment piece and adhere the sentiment focal piece to the card over the Lemon Lime Twist strip.
I added Holographic Resin Dots to the card for a little sparkle to complete the card!

Try your hand at this card sketch – if you are new to sketches try it literally as the sketch is drawn or be creative and use the sketch as a launching point and go crazy with ideas!

Let me know what you make – now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie