lights of aurora barn door card

lights of aurora barn door card

The barn door fun fold is one of the easiest fun fold cards to make – seriously – I know I say that cards are easy ALOT but this one is two cuts from a standard card base and then decorate!

Measurements:
BASE: Gorgeous Grape CS: 4 1/4″ x 11″
scored at 5 1/2″
Basic White CS: 4″ x 5 1/4″, 2″ x 5 1/4″
DSP: 2″ x 5 1/8″
Basic Black CS: 2 1/4″ x 5 1/2″

Cut the card base on the left-hand side of the score line at 2 1/4″ down the short side of the cardstock and cut all the way to the score line.
Then cut from the top of the score line down to the 2 1/4″ cut line. You will end up with a “barn door” hinged front flap on the card base.
Adhere the 4″ x 5 1/4″ Basic White layer to the inside of the card base.
Then adhere the DSP to the top of the Basic White layer leaving an even border on the top and sides.
Die cut the small tree line from the Basic Black layer.

Stamp the Sentiment in Berry Burst ink in the center of the 2 ” x 5 1/4″ Basic White layer.

Adhere to the front flap of the card.

Adhere the Basic Black tree die cut to the top of the white front layer.

Place the Frosted Iridescent Dots from the Lights of Aurora Suite Collection around the sentiment on the card front and you are finished with this easy WOW card!

Try this easy fun fold today with your own stamping stash and send me a picture of what you create! Now go and make some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – misty moonlight, flirty flamingo, and granny apple green

more color mondays – misty moonlight, flirty flamingo, and granny apple green

Cut and switch cards are super easy and fun – easy to make multiple cards.

Today’s More Color Mondays features Misty Moonlight, Flirty Flamingo, and Granny Apple Green.

Measurements:
BASE: Misty Moonlight CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, scrap for the die
Granny Apple Green CS: 4 1/8″ x 5 3/8″, scrap
for the die
DSP: (2) 3 3/4″ x 5″
Specialty Paper: 4″ x 5 1/4″
Flirty Flamingo CS: 4″ x 5 1/4″, scrap for the die
Basic White CS: 4″ x 5 1/4″, scrap for the
sentiment die

Measure and mark 1 1/4″ on one side from the top and bottom and 2″ on the other side from the bottom and the top
Cut all three Designer Series Papers from the 1 1/4″ to the 2″ mark diagonally.

Cut and swap the three pieces of Designer Series Paper.
Take the Irresistible Designs Specialty Paper and color it with the three colors from More Color Mondays color challenge with Blending Brushes.
Adhere the Granny Apple Green layer to the Misty Moonlight base.
Adhere the Flirty Flamingo layer to the Granny Apple Green layer.
Adhere the mixed DSP cuts to the Flirty Flamingo layer.
Die cut the large foliage sprigs out of the Misty Moonlight, Granny Apple Green, and Flirty Flamingo layers.

Die cut the large banner 3 times out of Basic White CS scraps.
On each die cut stamp sentiments in the More Color Mondays colors and blend the matching color around the edges.

Adhere the foliage sprigs to the right-hand lower corner of each of the three cards.

Pop up the sentiment piece on Stampin’ Dimensionals and adhere over the foliage die in a different color.
Add three Basic Rhinestones Jewels around the sentiments.
Cut and swap cards are so fun!
Try this card with your own supplies and see what you can come up with.

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – azure afternoon, berry burst and pool party

more color mondays – azure afternoon, berry burst and pool party

Do you have a BUCKET LIST?

I do – and one of the items on my bucket list is to someday see the Northern Lights!
So when I saw the new mini catalog the very first thing that caught my eye was the Lights of Aurora Suite Collection – I loved EVERYTHING about this – the gorgeous paper, the stamp set with it’s hopeful sentiments and the dies with there silhouette possibilities!

The Designer Series paper steals the show it is stunning but honestly the dies are some of my favorites – I love silhouette style cards and what better as a backdrop than this gorgeous paper!

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4 1/4″ x 5 1/2″
Basic Black CS: 4 1/4″ x 5 1/2″
DSP 6″ x 6″ piece to make 2 cards

This paper is so delicious I made two of the same card design with both edges of this one 6″ x 6″ piece.

Below is a photo from the Stampin’ Up! website that shows the DSP designs.

I cut the DSP to 5 1/2″ wide and then into (2) 3″ sections 3″ x 5 1/2″ pieces.

Adhere the pieces to the top edge of the card base.

Die cut the Basic White layer with the mountain die.
Die cut the black layer with the trees on one side and the mountain edge on the other side using all of the paper to its fullest!
Adhere the white snow mountain die to the black mountain die peaks.
Adhere the mountain die layers to the card below the Designer Series paper.
I popped up the tree silhouette die cut on Stampin’ Dimensionals and adhered it to the bottom edge of the card base over the mountain dies and the DSP.
I stamped in Berry Burst ink the wishing you a year of Wonder for the inside sentiment.
I did the same procedure with the other half od the DSP and adhered Frosted Iridescent Dots to finish off both cards!

I love, love , love this card!!!
Wishing you all a year of wonder! Now go and create some artwork of your very own – one stamp at a time – hopefully a project that you will love like I love this one!

Happy Stampin’
Natalie

more color mondays – balmy blue, old olive and basic beige

more color mondays – balmy blue, old olive and basic beige

Today’s another color challenge to inspire you to more creativity in your card design work!

The palette today is soft and neutral – perfect for a soft, subtle thank you card for someone special. The card features a gorgeous product that was introduced with the new annual catalog and I have totally ignored until now! I purchased it in the pre-order and then got busy with the new stamps and dies and forgot I had it! The Irresistible Designs contains 2 one-sided sheets of 3 different designs of white tone on tone embossed images in a leaf, floral and criss-cross pattern – used as is or colored to create stunning effects – this paper is amazing!

Measurements:
BASE: Basic Beige CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 4″ x 5 1/4″
Balmy Blue CS: scrap for die

Using blending brushes in a soft circular motion – starting off the paper – I colored in a diagonal pattern Old Olive ink at the bottom right-hand corner, Basic Beige ink in the middle and Balmy Blue in the top left-hand corner.
Because the specialty paper in embossed the image does not take the ink and pops off the page in a spectacular fashion!
Adhere the specialty paper to the Basic Beige card base and add a small piece of the Basic Beige Classic ribbon folded in a loop to the card.
I stamped the thanks and the leaf image from the Spotlight on Nature stamp set in Old Olive ink on a Balmy Blue die cut from the Spotlight on Nature die set. I popped up the sentiment die on Stampin’ Dimensionals and adhered it over the ribbon loop.
I added three gold flecked embellishments from the Strawberry Slush and Pretty in Pink Gems – these actually have a section of clear gems as well as the two pink colors and are perfect for this wonderful card!

Have you played with this type of Specialty paper before? It is super fun and produces easy, amazing results – try your hand at it soon!
Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

card sketch #111 – spooky halloween

card sketch #111 – spooky halloween

Today’s card sketch is a fun one to use with strips of colored paper, Designer Series paper or strips colored by hand – the possibilities are endless!

I choose the new Online Exclusive bundle Spooky Halloween, and the coordinating Spooky Sweet DSP.

Card Sketch #111 Measurements:
BASE: Granny Apple Green CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″ embossed
scrap for sentiment piece and critter stamp
Basic Black scrap for bat dies
DSP: (2) 3/4″ x 4″
(2) 1″ x 4″

I embossed the 4″ x 5 1/4″ Basic White layer with the Dotted Circles 3D embossing folder with the Stampin’ Cut and Emboss machine using the BASE plate #1 and the Embossing Plate #4.

I cut the Basic Black scrap with the bat die using the BASE plate #1, the Thin Die Adaptor #2 and the 2 cutting plates #3.

Adhere the Basic White embossed layer to the Base card.
Arrange the DSP strips on the upper half of the card and adhere over the embossed layer in a pleasing pattern.
Stamp the critter in Tuxedo Black Memento ink and the sentiment on scrap pieces of Basic White CS. Die cut the critter and cut the sentiment piece to size.
Adhere the critter to the left-hand side of the DSP arrangement.
Adhere the two bat dies overhead.
Using a blending brush and Granny Apple Green ink blend color onto the edges of the sentiment piece and pop up onto Stampin’ Dimensionals – adhere to the lower right-hand side of the card front.
Adhere embellishments off to finish the card – the suite comes with the coordinating DSP and the sweetest star embellishments!

I just may be converted to a Halloween card girl – LOL still not the biggest fan of the holiday but these cards are just too cute!!

Try making something fun for Fall this week and go create some artwork of your very own- one stamp at a time!

Happy Stampin’
Natalie

july 2025 demonstrator swap cards

july 2025 demonstrator swap cards

July’s swap cards are from the upcoming September to December 2025 mini catalog and the Online Exclusives collection!

I always get great ideas from this amazing group of sister demonstrator swappers and love to show you all the fun ideas!

This first swap card is a fun fold card from Lori V. using the gorgeous DSP Seasons of Elegance Specialty Paper and the Jar of Joy stamp set. Isn’t this a special card! The back of the card contains a decorated Basic White layer for writing your message!

My second swap card comes from Marie W and uses the super cute Spooky Halloween bundle.
Using the large Spotlight on Nature die to make the moon and all the fun dies from the bundle to create this sweet Haloween scene!
Kathi D. made this elegant Peace on Earth card that uses the Glimmer paper from that Suite and the DSP, stamps and dies to make this lovely heartfelt card!
My next swap card is from Carol S and uses the Online Exclusive Charming Day bundle for this beautiful z-fold fun fold Birthday card! The Charming Shimmer Faceted Dots and Wink of Stella add a lot of sparkle to this finished project!
Denise W hosts this demonstrator swap each month and is such a wonderful host – organizing the participants and even sending out prizes for her downline! She used the Label Me Grateful Online Exclusive Bundle and the Country Woods paper to make a great Thanksgiving card or a masculine thank you!
This card was also from Denise W as a sweet thank you card for being a consistent swapper!
What a wonderful surprise to get happy mail!
Even demonstrators love happy mail!
She used the Impressions Abloom and the Layered Thoughts stamp set.
My last July Swap card is from Judith P. and used the Perfectly Pear suite of products and the Unbounded Love stamp set which is on the Last Chance List.

Hoping that these cards inspired you to create some artwork of your very own – one stamp at a time!

Reminder: Some of these are from the upcoming Mini Catalog sets and are not available until September so they will not appear in the photo list below!

Happy Stampin’
Natalie

Product List
Paper Snips
[103579]
$12.00