wreath cards - nataliegramleystamps

layout #106 – new washi tape wreath card plus tip

by nataliegramleystamps | Jul 2, 2025 | card samples, card sketches, die cutting, embossing folders, my favorites, new catalog, techniques

I am in love with this new extra wide washi tape that coordinates with the Extraordinary Flora Bundle!
There are so many possibilities for this product…

First I want to share a tip I came up with – I don’t know about you but have you ever struggled finding the ends of your tape rolls?
I do sometimes and I did not want to waste a smig of this washi tape! So when I initially unwrapped the tape I saved the sticker from the packaging. I also save the plastic that comes with our photopolymer stamp sets! (I save way too many things just ask my hubby LOL) I rummaged through my drawer that contains all of my plastic strips from the photopolymer stamp sets and looked for the size that I needed. It needed to be long enough to reach most of the way around the washi tape roll and wide enough to run end to end.
I lifted the washi tape edge and connected it to one side of the plastic, I pressed the washi tape edge flat onto the plastic and laid it down again on the washi tape and rolled the plastic sheet around the roll and connected the two ends of the plastic sheet together with the sticker!
This works amazing the edge is always ready for use and accessible!

This card is modeled off my latest card sketch #106 – make a card using this sketch and let me know how it turns out!

Measurements:
BASE: Gorgeous Grape CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″, scrap for the
circle die, scrap for the washi tape at least
3 1/2″ x 5 1/2″ , scrap strip for the sentiment

SLowly unpeel the washi tape from the roll and lay on the Basic White CS layer measuring at least 3 1/2″ wide and 5 1/2″ long but can be longer. I used my fingers and a bone folder to get any wrinkles and creases out of the tape.

I used 3M tape to hold the detailed die in place to cut the washi tape images out.

Emboss the 4″ x 5 1/4″ Basic White layer in the Stampin’ Cut and Emboss machine using the Distressed Tile embossing folder.

Adhere the embossed layer to the card base leaving an even border the entire way around.

Die cut a smaller circle (I used the one that measures approximately 2 1/2″ in diameter – you want room to use the washi tape dies.

I used a blending brush and Gorgeous Grape ink to color the circle in a gradient pattern leaving the center lighter than the edges.

I popped the circle die onto Stampin’ Dimensionals so I could use the washi tape images above and below the die.

Start to arrange the die images around the circle building your wreath image.

I kept even the partial images and tucked those under – nothing was wasted!

Stamp the sentiment in Gorgeous Grape ink and I cut out the sentiment and adhered it in rows in the circle center.

Once you like your arrangement secure the washi tape die images around the circle with your favorite adhesive.

I finished the card with the Purple Fine Shimmer Gems to give the wreath card some coordinating sparkle.

Try making a wreath card with your supplies!
Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Product List

Extraordinary Flora Bundle (English)

[165245]

$43.00

Extraordinary Flora Photopolymer Stamp Set (English)

[165243]

$20.00

Basic White 8 1/2" X 11" Cardstock

[166780]

$14.00

Gorgeous Grape 8-1/2" X 11" Cardstock

[146987]

$14.00

Gorgeous Grape Classic Stampin' Pad

[147099]

$9.00

Stampin' Glass Mat Studio (Imperial)

[163987]

$60.00

Paper Trimmer

[152392]

$28.00

Bone Folder

[102300]

$8.00

Stampin' Seal

[152813]

$8.00

Stampin' Seal+

[149699]

$12.00

Tear & Tape Adhesive

[138995]

$7.00

Multipurpose Liquid Glue

[110755]

$6.00

Mini Glue Dots

[103683]

$7.25

Mini Stampin' Dimensionals

[144108]

$4.25

Stampin' Dimensionals

[104430]

$4.25

Paper Snips

[103579]

$12.00

Stampin' Cut & Emboss Machine

[149653]

$140.00

Distressed Tile 3 D Embossing Folder

[162189]

$10.00

Extraordinary Flora Die

[165244]

$28.00

Extraordinary Flora Washi Tape

[165269]

$15.00

Purple Fine Shimmer Gems

[162611]

$8.00

← more color mondays - color coach analagous colors happy 4th - thank a veteran with a card →

new online exclusives – encircled in nature product review

by nataliegramleystamps | Mar 6, 2024 | card samples, embossing folders, fun fold, online exclusives, stamps ink paper, techniques

Yesterday, Stampin’ Up! released some amazing new stamp sets, dies, bundles and suites in their Online Exclusives promotion. This program was developed to bring you new stamps more frequently than the publication of catalogs will allow! So we have new stuff coming out more frequently – more choices!!
This is one of the stamp bundles that I will be showing you over the next few weeks and it is lovely. A stamp set called Encircled in Nature with a twig wreath and coordinating stamps and dies to make fantastic wreaths and tree scenes and even things outside of the wreath image, flowers and sprigs of leaves and stars and a moon for so many possibilities!

I have tutorial directions for an in depth Z fold card with a watercolor wash background technique and other samples to show the diversity of this year round set!

Measurements for the Tutorial card:
Base: Coastal Cabana CS 5 1/2″ x 8 1/2″
scored at 4 1/2 and 2 1/8″
Basic White Layers: (2) 4″ x 5 1/4″
scrap of Pretty Peacock for the die
I started with a E size acrylic block and laid the Coastal Cabana ink pad on the surface of the block to transfer the ink.

I sprayed the surface of the Basic White cardstock layer and the acrylic block with water.

I laid the acrylic block on the center of the Basic White layer and let the ink soak in for a minute.

Pull off the acrylic block and either let the paper dry naturally or if you are in a hurry grab your Heat Tool and dry it heating both the underside of the paper and the surface to help with the paper curling that occurs when the paper is wet.

I stamped the twig wreath stamp image onto the upper center of the watercolor space.

I rotated the image and re-stamped for a thicker twig wreath image.

I stamped the curved tree image in Pretty Peacock and then without re-inking the stamp I stamped the image again to provide a fuller image with more depth.

I stamped the sentiment in the middle of the wreath in Pecan Pie ink like the wreath.

I stamped the stars and moon image in the upper right hand corner in Pretty Peacock ink.

I die cut the solitary tree out of Pretty Peacock scrap and adhered it to the bottom left hand edge of the watercolor square.

I ran that whole layer through the Stampin’ Cut and Emboss machine with the Painted Texture 3D Embossing Folder.

I scored the base card and used a bone folder to crease the score lines.

I added color to the Iridescent Pearls with the Pretty Peacock Stampin’ Blends marker and allowed them to dry.

I added SEAL Adhesive to the front panel.

I added the embossed layer to the front panel and added the Pretty Peacock-colored Iridescent pearls to the card front.

I stamped the single tree in Pretty Peacock ink on the second Basic White layer and adhered it to the inside of the card.

This is the finished Z fold card!

The stamp set comes with 11 stamps 7 image stamps and four sentiments in print and cursive fonts.

The die set comes with 10 dies. two to cut out the inside and outside of the twig branch wreath so you can cut the inside only, outside only or both! Two tree stand alone dies and one tree that cuts out the single tree stamp, one die for the flower stamp, one die for a stand only berry wreath and one die that cuts two pine boughs at once.
Note: I purchase on Amazon full sheets of magnet paper and cut them to size and stick them to the paper that the dies come on – I find it easier to remove them from the magnet sheets instead of the tape that holds them in place on the original paper packaging .

My next card sample uses just a part of the single tree stamp. I stamped in a variety of colors to create a rainbow effect on 1 1/4″ squares matted in black and mounted onto a Real Red card base.
I popped up the sentiment onto Stampin’ Dimensionals and added Black and White Gingham ribbon in a loop under the sentiment.
I added a few sparkle gems to complete the card.

My next card sample used just the flower image and flower die from the bundle in Highland Heather, Granny Apple Green and Gorgeous Grape markers and Highland Heather CS for the dies. I embossed a center panel from the Basics 3D embossing folder pack and added the dies and flowers to the bottom of the card. I added a sentiment, ribbon and Purple Sparkle gems to the card as well.

The wreath is one of the main items in this set and the next two samples use the two different wreaths. This first wreath sample I die cut the stand alone (Meaning the die does not have a stamp that coordinates with it) on Basic White cardstock and colored the branches in Old Olive marker and the berries in Light and Dark Cherry Cobbler Stampin’ Blends! Then I die cut the pine boughs in Mossy Meadow CS and added them under the colored wreath for depth and texture. I added a linen twine bow and Iridescent pearls and popped up a sentiment matted in coordinating Cherry Cobbler Cardstock. I adhered the wreath to a Basic White cardstock background embossed with the Exposed Brick 3D Embossing Folder and mounted that onto a Mossy Meadow cardstock base.

I recently finished a swap card for this month’s swap and used the leaf die on the Oxidized Copper DSP and with two passes made four sprigs of gorgeous leaves I glued them into a wreath on another embossed Exposed Brick 3D layer and mounted that onto a Pretty Peacock cardstock base. I stamped the sentiment on the basic White layer before embossing and added Adhesive Backed Seuins Trio in Pretty Peacock coordinating colors to finish the swap card!

My last Sample card uses only the stand alone tree dies in Gorgeous Grape cardstock. I made a cloud background with a mask made from the Basics Borders die set, with Highland Heather and Gorgeous Grape blending brushes. I mounted the Basic White layer onto Gorgeous Grape card base with a sentiment and Iridescent Pearls around the wording to finish this elegant and simple card!

Here are six ideas for this new Online Exclusive bundle and that is just the start of the possibilities for this set. Check out the rest of the Online exclusive offerings that just dropped yesterday from a new latte suite to a magnificent Magnolia bundle!

Now go create some art work of your very own – one stamp at a time!

Happy Stampin’
Natalie

Product List