more color mondays – real red, pumpkin pie and crushed curry

more color mondays – real red, pumpkin pie and crushed curry

Today’s More Color Mondays color challenge card contains a technique I have shown before with a little twist!

I love white on white cards with a slash of color – and up north we are receiving a lot of the white stuff so I was in need of a SLASH of color!

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″, (2) 4″ x 5 1/4″ layers,
1/2″ strip scrap

Yep that is it supplies are minimal but the results are a WOW!

Take the two Basic White CS layers and die cut one with the Textured Notes rectangular dies – I used the fourth largest rectangle.

Save the die cut for another use as we will be using the negative die as a mask.

Take the other layer and emboss using the Stampin’ Cut and Emboss machine with Base Plate #1 and Embossing Plate #4 and the Sunflower 3D embossing folder.

I used my glass mat and taped the mask over the embossed layer – securing them down so they don’t move.
I burnished Crushed Curry ink with a blending brush in a strip down the right side of the inside of the masked portion of the layers.
I burnished Pumpkin Pie ink with a blending brush in a strip down the middle of the inside of the masked portion of the layers.
I burnished Real Red ink with a blending brush in a strip down the left side of the inside of the masked portion of the layers.
Normally when I do a White Wash technique I drag the Craft White ink pad over cardstock to create the Whitewashed look but I did not want to drag my white pad over bright ink colors and corrupt the white pad. The craft ink would have re-wet the colored ink and destroyed the ink pad so I took my palette knife and made an ink slurry with Craft White re-inker and water (you can use a Stampin’ Spritzer to wet the ink) then mixed and spread it on an acrylic block with the flat bottom of the palette knife.
I then dragged the palette knife over the Sunflower embossed surface to give the tips of the petals a white washed effect!
Remove the mask and reveal your lovely layer!
I used a Basic White 1/2″ strip scrap and stamped the “just because” sentiment from the Blooming Phrases stamp set and colored it with the residual ink left on the blending brushes in the same order as done on the card!
Adhere the layer to the card base and adhere the sentiment piece on Stampin’ Dimensionals for some added depth and dimension!

Add some Basic Rhinestone Jewels to the card to finish it off with a little sparkle and this simple but stunning card is complete!

Imagine the possibilities – use any shape and make a mask and color inside the negative space!

Now go and try this technique and make some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

direct to paper technique

direct to paper technique

Today’s card is all about direct to paper technique.

Measurements:
BASE: Crumb Cake CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4″ x 5 1/4″
Basic White CS: scrap for die

Emboss the Crumb Cake layer with the Sunflower 3D embossing folder.

Drag the White Craft ink pad lightly over the embossed layer. Continue to drag over the layer until the color covers to your satisfaction.
Stamp the sentiment right justified in Tuxedo Black memento ink on the large banner die cut from the Stylish Shapes die set.
Color the banner die with Crumb Cake ink and a blending brush. I colored the left-hand side darker with the ink.
Adhere the embossed layer to the card base.

Cut the banner die and use the left-hand side for a banner edge.

Adhere the banner edge to the bottom of the sentiment die and adhere the sentiment pieces to the left-hand edge of the layer.
Embellish the card with some sparkly gems to finish this sympathy card.

This white wash direct to paper technique brings the tone on tone embossing to life – try this technique and go create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

more color mondays – night of navy, misty moonlight and calypso coral

more color mondays – night of navy, misty moonlight and calypso coral

This year Stampin’ Up! added a new line of cardstock called Two-toned cardstock.

This cardstock is printed color, because the color is printed on the surface of the paper it leaves the core of the paper white! This opens up a world of possibilities for tearing and sanding!

Today’s More Color Monday color challenge card uses this new cardstock with embossing and sanding and features a rich color combination of Night of Navy, Misty Moonlight and Calypso Coral.

Measurements:
BASE: Night of Navy CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Misty Moonlight CS: (2) 1/2″ x 5 1/4″ and a scrap
strip for the sentiment piece
Calypso Coral Two Toned cardstock:
3″ x 5 1/4″

I started with a different sentiment for this card but liked it so much that I decided to make this a birthday card for my best friend and soul mate, his birthday is today so if you see Kevin wish him a great one!

Take the two-toned cardstock and emboss with the Sunflower 3D embossing folder.
Take a sanding block or a nail file and gently rub over the embossed surface rubbing away a layer of cardstock to reveal the white core in elevated areas of the embossed design.

Emboss the 2 Misty Moonlight strips with the Mini Corrugated 3D embossing folder so that the corrugated lines are perpendicular to the long side of the strip. This will make the strips appear more like a ruffled effect when added to the card front.

Adhere the Misty Moonlight embossed strips to the top and bottom edges of the Sunflower embossed Two-toned cardstock.

Distress the edges of the Misty Moonlight Corrugated embossed edges.

Adhere the embossed images to the center of the card front.

Stamp the sentiment onto the strip scrap and fussy cut a banner edge to the right hand side
and adhere on top of the sunflower embossed area.

I added Navy Charming Shimmer Faceted Dots for a finished coordinated sparkle!

This new paper delivers a punch with the white core! It is now available in all the Stampin’ Up! Core and In Color Collections! Try some soon and see what all the excitement is about!

Now go and create some fun artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

sunflower embossing on designer series paper

sunflower embossing on designer series paper

I have had so much fun playing with the new Online Exclusive 3D Sunflower embossing folder – and today’s blog post is no exception!

Have you ever inked up an embossing folder?
Have you ever embossed Designer Series Paper? Have you ever combined these techniques?

Today that is exactly what we are experimenting with!

Measurements:
BASE: Petal Pink CS: 4 1/4″ x 11″
scored at 5 1/2″
Basic White CS: 4″ x 5 1/4″
Everyday Skies DSP: 6″ x 6″ cut to 4″ x 5 1/4″
and save the 2″ x 5 1/4″
Balmy Blue CS: scrap for the sentiment die

This Everyday Skies DSP does not look like flowers necessarily but the background is subtle and perfect for this technique!

Using a brayer and Memento Tuxedo Black ink,
Ink the side with the Stampin’ Up! logo.
Place the 6″ x 6″ DSP in the folder with the side you wish to use face up towards the inked side of the folder.
Close the folder overe the DSP and run through the Stampin’ Cut and Emboss machine.
Cut the 6″ x 6″ DSP to 5 1/4″ and then cut at 4″.

Adhere the 2″ x 5 1/4″ piece onto the Basic White layer on the right-hand side of the layer leaving a 1/8″ border on the right.

Adhere the Basic White layer to the inside of the card base.

Adhere the 4″ x 5 1/4″ DSP piece to the card front leaving an even border the entire way around!
Stamp the sentiment from Mixed labels bundle on Balmy Blue CS with Tuxedo Black memento ink and die cut with the Mixed Labels die set.

Pop up the sentiment die onto Stampin’ Dimensionals and adhere to the card front over the DSP.

I added three Neutral Matte Dots in Basic Black to finish off the card. Can you beleive that is Everyday Skies DSP coloring those Sunflowers?

Here is the same technique with a different pattern of Everyday Skies DSP – amazing how different just changing the pattern of the paper changes the entire look of the card!
I used some of my retired stash of DSP from the Lily Pond Lane DSP and these are the cards that resulted from two different patterns from that Designer Series Paper.
Try inking up one of the 3D embossing folders in your collection and see what combinations you can make!

Now go and create some art work of your very own with your folders and stamps – one stamp at a time!

Happy Stampin’
Natalie

june demonstrator swap cards

june demonstrator swap cards

Today’s post is all about the cards I received in my demonstrator swap for June! The theme for this month was a critter swap!

The first card is from Denise W – our swap organizer and one of my upline demonstrators! She chose the Turtle-y Cute suite of products and layered the card with strips of Granny Apple Green, Garden Green, Shaded SPruce, Night of Navy and Balmy Blue with distressed edges for fun! She added Shades of Green Hexagons for embellishments and a DSP turtle cute out to complete this adorable card!

Lori V’s swap card features the Feathered Fun bird image sitting on a clever Everyday Arches die cut that resembles a swinging perch! these are mounted on a Cajun Craze embossed Exposed Brick background on a Pecan Pie card base – great color combination!
This next swap card is from Marie W and features the Choose Happy and Notes and Totes bundles on the Thoughtful Journey DSP – so cute!
Patty J used the Otterly Amazing Bundle for this sweet critter card, die cutting the DSP for a fast and easy card that packs a punch!
Carol S’s swap card uses the 2025-2027 Designer Series paper for the Beautiful Butterflies dies flitting above the Pressed Flowers embossing folder and the Strawberry Slush Faux Linen Ribbon. You probably cannot see it in the photographs but the Butterfly bodies are glittered with the Wink of Stella pen!
Love the sentiment using the hole punch assortment to string the ribbon through the circle die – so clever!
This last card is from Michelle L and features the Sunflower 3D embossing folder in Lost Lagoon with accents of Basic Beige and Basic White with Flat Antique Pearls!
These cards have a lot of subtle charm and loads of ideas – hopefully you saw something on one or more of these examples that inspired you to create some artwork of your very own – now go create – one stamp at a time!

Happy Stampin’
Natalie