more color mondays – bubble bath, pretty in pink and secret sea

more color mondays – bubble bath, pretty in pink and secret sea

More Color Mondays today features Bubble Bath, Pretty in Pink and Secret Sea – in the Beach Boardwalk DSP pack there is a palm tree design which is super easy to make cards with – it has a border of palm trees on a bottom and top border – if you cut that page 5 1/4″ from the top and 5 1/4″ from the bottom edge you get two 12″ strips of palm trees – cut those again into 4″ pieces and you can make 6 of these cards from one sheet with paper from the middle to decorate the envelopes or the inside of the card!

Measurements:
BASE: Secret Sea CS: 4 1/4″ x 11″
scored at 5 1/2″
Basic White CS: 4″ x 5 1/4″
DSP: 4″ x 6″ cut to 4″ x 5 1/4″ save the extra for
inside decoration
Bubble Bath CS: 1/2″ strip
Pretty in Pink CS: 1/2″ strip

Cut the DSP into 4″ x 6″ pieces and then cut 3/4″ off the 6″ side.

Score the base card at 5 1/2″, adhere the Basic White layer to the inside of the card and adhere the 3/4″ x 4″ strip to the bottom of the Basic White layer. I reversed the pattern and used the B side for the inside decor.

I stamped Fun in the Sun from the Beach Time scrapbooking set in Pretty in Pink ink on the Bubble Bath cardstock strip. I stamped the sun image at the end of the sentiment. I tore the right-hand edge and adhered that strip to the Pretty in Pink cardstock strip. I offset the strips and tore the right-hand edge of the bottom strip to match the one on top!

I added Stampin’ Dimensionals to the sentiment strips.

I adhered the DSP to the card front.

I then adhered the sentiment strip with Dimensionals over the DSP.

I added Pearlized Faceted Circles around the sentiment and this simple but awesome card is complete. When you have Designer Series Paper this nice it is so easy to make lovely cards!

Try a pack of our gorgeous DSP today and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

more color mondays – bubble bath, pretty in pink and pool party

more color mondays – bubble bath, pretty in pink and pool party

Today’s More Color Monday is also a repeat card sketch back on February 18th I posted a blog post about card sketch #118 -= it is such a fun and easy way to make a card I thought I would show you another version with a totally different Designer Series Paper to show you just how versatile a sketch can be! This sketch is super awesome because it allows you to stretch you DSP by using 3″ and 4″ squares! No WASTE!!

Measurements:
BASE: Pool Party CS: 4 1/4″ x 11″
scored at 5 1/2″
DSP: 4″ square, 3″ square
Bubble Bath CS: 3 1/4″ square, 5/8″ x 2 1/8″
Pretty in Pink CS: 7/8″ x 2 5/8″
Basic Black CS: scrap

Adhere the 4″ square of DSP to the top of the card front.

Adhere the 3″ DSP square to the Bubble Bath matte.

Stamp the sentiment Celebrate to the small Bubble Bath CS layer in Tuxedo Black Memento ink.
Mount onto a piece of scrap Pretty In Pink CS and cut to 1/8″ border on the bottom.
Leave about 1/4″ on the right-hand edge for the punch.
Using the Happy Labels Pick a Punch on the Ticket stub side – punch the right-hand edge of the sentiment piece to make it look like a ticket stub edging.
Stamp Happy Birthday from the Boardwalk Fun stamp set in Tuxedo Black Memento ink in the center of the inside of the card.

Die cut a palm tree from the Boardwalk Fun dies in Basic Black CS and adhere to the bottom right-hand corner of the inside of the card.

Adhere the 3 1/4″ matted DSP square to the lower center of the 4″ DSP square on the card front.
Pop up the sentiment over the DSP on the card front.
I place three Frosted Irridescent Dots (which are a retired product but I will put an alternative active product in the photo links below for your buying pleasure! LOL) onto the card to finish off this fun and easy card sketch birthday card!

Try this sketch today with some of your DSP stock and let me know how it turns out!
Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

birthday secret message slider card

birthday secret message slider card

Did you like decoder rings when you were little or secret messages like the ones with invisible ink? This card is a throwback to the those fun days! This is a Secret Message Slider Card featuring the Swirls Designs stamp set and the new Online Exclusive Splash of Sparkles Specialty Designer Series Paper.

Measurements:

BASE: Timid Tiger CS: 4 1/4″ x 5 1/2″
3 3/4″ x 4 1/4″, 2 1/2″ x 5″
Pretty In Pink layer: 5 1/4″ x 8 1/2″, scored at
2 3/4″ and 6 3/4″
DSP: 2 5/8″ x 5 1/8″, 1 5/8″ x 5 1/8″
Basic White CS: 2 3/8″ x 4 7/8″, 3 1/4″ x 4 1/8″

I stamped the circle image from the Swirled Designs stamp set in Timid Tiger ink to the two Basic White CS layers as shown.

Then I used the splatter image, the Enjoy the Ride and the Happy Birthday from the Boardwalk Fun stamp set in Versamark and heat embossed with Gold embossing powder and the Heat Tool.

I actually stamped the Enjoy the Ride on the 3 1/4″ piece after I photographed it – it will be the secret message you will see at the end!

With the 3 3/4″ side at the top of the 3 3/4″ x 4 1/4″ piece, score at 3/8″ for the inside slider piece.

Adhere the Basic White layers to the Mattes of Timid Tiger making sure that the score is on the left hand side of the smaller piece.

Score the Pretty In Pink cardstock layer at 2 3/4″ and 6 3/4″.

Adhere the 2 5/8″ x 5 1/8″ DSP piece to the inside left panel.

Adhere the 1 5/8″ x 5 1/8″ DSP piece to the outside right hand panel.
Add two small pieces of Tear-n-Tape to the upper and lower edge of the inside of the right side panel as shown in the photograph.
With the small tab to the left of the 3 1/4″ x 4 1/8″ adhere the Basic White stamped layer to the 3 3/4″ x 4 1/4″ Timid Tiger piece to the right of the score line.

Add a piece of Tear-n-Tape along the length of the inside slider piece on the 3/8″ tab to the left of the score line.

Place the inside slider piece to the right hand side of the score line. Peel off the release paper for the Tear-n-Tape.
Fold the front panel down over the slider piece.
Adhere the front stamped panel to the outside of the first panel.

]Open up the first panel and bend the slider piece back towards the inside of the card and use a bone folder to secure the Tear-n-Tape and crease the score line.

Remove the release paper of the two smaller pieces on the last panel.

Fold the right panel over the left hand edge of the slider piece and rub the areas where the Tear-n-Tape is to secure the panel over the slider mechanism.

Now as you open and close the front left hand panel the slider mechanism will slide in and out to reveal you message – cool right?

Just like when you where a little kid create one of these cards and send a hidden message to one of your favorite childhood playmates to remind them of all the fun you used to have as kids!

Here is a short video to show you the mechanism in action!

Now it’s your turn – go and create some interactive artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

florals in bloom anniversary card

florals in bloom anniversary card

Today is a simple stamping card using two diagonally cut pieces of designer series paper.

Measurements:
BASE: Pretty in Pink CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: (2) 4″ x 5 1/4″ cut diagonally
Flirty Flamingo CS: scrap for die cuts
Basic White CS: scrap for stamping

Adhere the Florals in Bloom DSP to the base card.
Adhere the other piece of DSP to the bottom corner of the base card.

Stamp the anniversary sentiment onto a Flirty Flamingo CS die cut from the Spotlight on Nature. Add Stampin’ DImensionals onto the back of the die cut and adhere above the intersection of the two diagonal pieces of DSP.

Stamp the butterflies from the Spotlight on Nature stamp set in Tuxedo Black Memento ink. Fussy cut the butterfly and add Stampin’ Dimensionals to the back of the butterfly image.
Add the butterfly to the right corner of the Flirty Flamingo die cut.
Add five Iridescent Pearls around the sentiment and card base.

Try this simple design today and create some artwork of your very own – one stamp at a time.

Happy Stampin’
Natalie

more color mondays – cloud cover, pretty in pink, and blackberry bliss

more color mondays – cloud cover, pretty in pink, and blackberry bliss

Today’s More Color Mondays color challenge features a new Online Exclusive Celebratory Sips Suite with two In Colors: Cloud Cover from the 2025-2027 collection and Pretty in Pink from last year’s 2024-2026 collection.

Measurements:
BASE: Blackberry Bliss CS: 4 1/4″ x 11″
scored at 5 1/2″
Basic White CS: 4″ x 5 1/4″
Cloud Cover CS: 4″ x 5 1/4″
DSP: 3 3/4″ x 5″ scraps for two glass die cuts
and umbrella

On the Basic White layer stamp two Blackberries on the lower right-hand corner in Tuxedo Black Memento ink.
Color the blackberries with the Light and Dark Blackberry Bliss Stampin’ Blends.
Adhere the Basic White layer on the inside of the Blackberry Bliss card base.
Stamp the “Let’s Celebrate” sentiment.
Adhere the DSP layer onto the Cloud Cover layer then adhere to the card front.
In the Celebratory Sips 12″ x 12″ DSP package there are several pieces of DSP that contain water colored squares and rectangles of gorgeous color. This is a great background pattern but can also be used to die cut drink glasses from – so fun!
I stamp the tall glass stamp image in Tuxedo Black Memento ink on the Pretty in Pink colored rectangle. I place the rectangle glass die and the embossed glass pattern inside and die cut the rectangle die on the Pretty in Pink colored rectangle leaving a small white space at the top.
Adhere the pink glass die cut onto the DSP layer.
Stamp the small line image in Tuxedo Black Memento ink touching the top of the pink liquid line and above the glass on the DSP.
Stamp the smaller glass image over one of the Blackberry Bliss colored squares on the DSP piece leaving a little white at the top of the glass image, stamp two blackberry images in the bottom of the glass and die cut the image.

Stamp the umbrella out of one of the other Pink rectangles and die cut it out.

Stamp the Cheers sentiment in the upper left hand are of the DSP layer on the card front.

Pop up the smaller glass and the umbrella and place on the card. The Umbrella over the stick in the pink glass and the smaller glass in front of the pink glass.

Add three Cloud Cover In Color Flat Pearls around the sentiment for coordinating sparkle!
I tied a ribbon from the suite called Gold Striped Mesh ribbon around the top of the card to finish off this fun card perfect for a fun celebration!

Check out this Suite when it comes out in the May Online Exclusives debut on May 1st along with some other pretty awesome sets and bundles! The click-able photos below will not contain the yet to be released May Online Exclusive products as they will not be able to order until then.

No go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie