so swirly multi-panel fun fold card

so swirly multi-panel fun fold card

This is a easy and simple fun fold.
I haven’t played with the Magnolia Mood Bundle for a while and this card allows the gorgeous flower die cuts to shine!

Measurements:
BASE: Berry Burst CS: 5 1/2″ x 8 1/2″
scored at 1 1/4″ and 4 1/4″
(2) 1″ x 5 1/4″
Basic White CS: 3″ x 5 1/4″
(2) 2 3/4″ x 5 1/4″
4″ x 5 1/4″
scrap for die cut
Mossy Meadow CS: scrap for die cut

Emboss the (3) 1″ x 5 1/2″ and (2) 2 3/4″ x 5 1/4″ in the So Swirly embossing folder.
Adhere the 1″ strip to the left hand inside panel.
Adhere the middle panel with the Basic White embossed layer.
Close the card base and adhere the Basic White embossed layer to the panel to the right of the score line.
Adhere the Berry Burst embossed layer to the smaller panel.
Stamp the inside sentiment to the 3″ Basic Whit layer and adhere to the right side of the inside score line.
Adhere the Berry Burst embossed layer to the outside of the 3″ Basic White layer.
Stamp the Happy Birthday sentiment in Berry Burst ink on the medium Stylish Shapes square die diagonally.
Color the 4″ x 5 1/4″ Basic White layer with Blending Brush and Berry Burst ink. Spray the layer with water from a Stampin’ Spritzer.
Die cut the large Magnolia flower die from the Magnolia Mood die set. Die cut the same flower in Mossy Meadow CS. Adhere the flowers only on top of the Mossy Meadow CS die.
Adhere the flower to the Stylish Shapes square and adhere the focal point to the outside smaller panel.
I love the So Swirly embossing folder as the backdrop for the beautiful Magnolia image and this fun fold!

Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

watercolored splatter 3D folder technique

watercolored splatter 3D folder technique

This card uses a special technique with an ink pad and water spritzer bottle and a 3D embossing folder.

Measurements:
BASE: Petunia Pop CS: 4 1/4″ x 11″
scored at 5 1/2″
1″ strip for the die
Basic White CS: 4″ x 5 1/4″
2024-2026 In Color Glimmer Specialty Paper
2.5″ strip for the die

Press the Petunia Pop ink pad directly onto the Forever Plaid 3D embossing folder. Spray with water from the Stampin’ Spritzer directly onto the folder. Place the Basic White layer into the middle of the Forever Plaid 3D embossing folder.
Roll the layer through the Stampin’ Cut and Emboss and dry the layer with the Heat Tool.
Adhere the Basic White layer to the Petunia Pop card base.
Die cut the Petunia Pop Glimmer Specialty Paper and pop up the tree onto Stampin’ Dimensionals and place in the middle of the embossed layer.
Stamp Merry Christmas onto the 1″ strip on the Petunia Pop cardstock with matching ink.
Die cut the strip with the banner die from the Greetings of the Season die set.
Add a Petunia Pop ribbon and pop up the die onto the strip onto the bottom of the card.
Add the pink Petunia Pop like color Iridescent Adhesive-Backed Discs onto the tree and the sentiment strip.
nests of winter designer series paper card

nests of winter designer series paper card

I had some left over foliage frames dies from a previous card design from the Winterly Tree Tops Bundle that I just could not let go to waste so this is the card I designed around that fun frame die!

Measurements:
BASE: Granny Apple Green
scrap for sentiment piece
Basic White layers (2) 4″ x 5 1/4″
Nests of Winter DSP scrap for bird fussy cut

Color one of the Basic White layers with Granny Apple Green ink and Garden Green ink and individual Blending brushes for each color.
Starting off the paper in a circular motion color different portions of the Basic White layer until the entire surface is covered and the colors are blended together.
Spray the colored layer with water from a Stampin’ Spritzer. allow to dry – where the water droplets hit the ink it will lift the color and lighten the area creating a very cool splatter background!
Cut the other Basic White layer with the foliage frame die from the Winterly Tree Tops die set.
Adhere the frame over the splattered blended background.
Adhere the frame die to the Granny Apple Green card base.
Die cut the rectangular sentiment piece from the Peaceful Season die set and stamp the “thinking of you always” sentiment from the Winterly Tree Tops stamp set in Tuxedo Black Memento ink and thread a 5 inch White Diagonal Trim ribbon from the Petal Pink and White Diagonal Trim Combo Pack through the openings and cut the edges in a diagonal.
Pop up the sentiment piece on Stampin’ Dimensionals and place in the lower right-hand corner of the card base.
Fussy cut the chickadee bird from the Nests of Winter Designer Series Paper and adhere above the sentiment piece.
Finish the card off with three white Iridescent Adhesive-Backed Discs and the card is done!

What a difference that background makes on the card!

Try this background today and combine it with stamps you have to create your own card – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – flirty flamingo, mambo melon, and highland heather

more color mondays – flirty flamingo, mambo melon, and highland heather

Today’s More Color Monday color challenge features Flirty Flamingo, Mambo Melon, and Highland Heather. This non traditional Christmas card has a gorgeous background made with a window sheet and Stampin’ Blends markers.

Measurements:
BASE: Highland Heather 5 1/2″ x 8 1/2″
scored at 4 1/4″
scrap for the sentiment word die and
sentiment piece.
Basic White layer: 4″ x 5 1/4″
Glitter paper: scraps for dies

Draw squiggly lines on a window sheet with Flirty Flamingo, Melon mambo, and Highland Heather Stampin’ Blends.
Spray the window sheet with alcohol.
Place two 1/4 sheets of Basic White cardstock and allow the ink and alcohol to sink into the paper.
Allow to dry.
Die cut the word Christmas in Highland Heather and four trees from the Peaceful Evergreens dies in Berry Burst, Old Olive and White Glitter Specialty Paper.
Adhere every other tree to the alcohol background and pop up the other two on mini Stampin’ Dimensionals.
Adhere the word to the top of the layer.
Adhere the alcohol layer to the Highland Heather card base.
Die cut the large sentiment piece from the Peaceful Seasons dies in Highland Heather cardstock.
Cut 5 inches of ribbon.
Stamp the sentiment in Versamark ink and then sprinkle in White embossing powder.
Heat the powder with the Heat Tool until the embossing powder is melted.
Pop up the sentiment piece and place in the lower right-hand corner.
Apply Iridescent Adhesive-Backed Discs to the sentiment piece.
I think non-traditional Christmas colors are so exciting and different.
Try some different colors and see what you can come up with. Now go and make some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

sweet pea is so stinking cute

sweet pea is so stinking cute

I borrowed this set from one of my downline the other day and can I just tell you it is SO STINKIN’ CUTE that I could not stop creating cards with it!

I have so many samples to share with you today – if you are looking for a fun stamp set that crosses generational lines this stamp set check all the boxes. Stinkin’ cute enough for kids cards but “Pun”ny enough for the adults – I seriously could not get enough of it! The images are so sweet!

This first card I combined the Sweet Pea set with the Full of Life 6″ x 6″ DSP. I stamped the two peas in a pod – literally LOL on a Nested Essentials die and colored with Real Red, Lemon Lime Twist and Granny Apple Green Stampin’ Blends.
I cut a 2 3/4″ x 5 1/2” piece of Full of Life DSP adhered it to the center of an Azure Afternoon card base and popped up the Nested Essentials stamped and colored die over the center of the DSP. I added Adhesive-Backed Shiny Sequins to cap it all off!

I have a picture of the same card with the Crushed Curry card stock!
On a Poppy Parade card base I stamped the leaf tendril in Tuxedo Black Memento ink on the base. Stamped the same stamp on scrap Basic White paper, colored in with Lemon Lime Twist Light and Dark Stampin’ Blends and fussy cut four stems. I stamped the four peas in a pod and colored with Stampin’ Blends on a small Nested Essentials die. I popped up the die onto Stampin’ Dimensionsla in the middle of the sprigs. I stamped the You make me HaPEA on the bottom right-hand side of the card and added Iridescent Adhesive-Backed Discs to finish the card.
The next card uses a Basic White cardstock base and a Basic White layer that is embossed with the Distressed Tiles 3D embossing folder. I colored the card center with Lemon Lime Twist and a Blending Brush. I stamped the two peas in a pod and the You make me HaPEA sentiment in Tuxedo Black Memento ink on the largest circle of the Stylish Shapes die set. I colored them with Stampin’ Blends and popped it up on Stampin’ Dimensionals in the card center. Shiny Sequins finish off the card with coordinated sparkle.
This card uses a Crushed Curry cardstock base, a Basic White layer embossed with the Dotted Circle 3D embossing folder, a 2″ x 4″ piece of Full of Life DSP, and two scraps of Basic White for the two die cuts from Perennial Postage dies and Nested Essentials. The Adhesive-backed Shiny Sequins finishes this card.
This next card embossed the base Azure Afternoon card with the Dotted Circles 3D embossing folder. The stamped focal piece is a Deckled Rectangle die set, same Stampin’ Blends and Iridescent Discs.
This card starts with a Basic White Cardstock base and a Basic White layer embossed with the Dotted Circle 3D embossing folder that is colored with Lemon Lime Twist ink from a Blending Brush. Love this image Hello GrumPEA – too stinkin’ cute.
The Lemon Lime Twist card is the base for the next card. The smallest die from the Stylish Shapes is the focal point for the GrumPEA image.
This Sweet Pea card uses Gorgeous Grape card base, a 3 1/4″ x 4 3/4″ piece of Basic White negative die from the Nested Essentials die, a Brights 6″ x 6″ DSP cut to fit behind the negative space. The sweet pea image was colored with Stampin’ Blends and die cut with the Perennial Postage dies.
This card uses a 2 1/2″ x 5 1/2″ piece of Full of Life DSP on a Crushed Curry card base combined with two die cuts from Nested Essentials and Stylish Shapes die brushed with a blending brush and Shiny Sequins.
White on White is the base for this card. The frame is made from the Deckled Rectangle dies. Circle dies from Stylish Shapes and Spotlight on Nature make the focal points for the sweet pea image and sentiment. The Shiny Sequins finishes off this card.
The last card uses a Gorgeous Grape cardstock base, Brights 6″ x 6″ DSP pieces, and a circle die from Stylish Shapes with the sweet pea image finishes the card with Iridescent discs to accent!
Don’t you agree this is a STINKIN’ CUTE stamp set? It’s your turn to find a cute stamp set and create some artwork of your very own – one stamp set at a time!

Happy Stampin’
Natalie

Product List
Paper Snips
[103579]
$12.00