gallery blooms su creative coloring challenge

gallery blooms su creative coloring challenge

One of my favorite LAST CHANCE LIST items is the Gallery Blooms Bundle! I am so sad this is leaving and I did not use it enough for sure!

This card actually qualifies for the April SU Creative Challenge as well as being a gorgeous card! This month the challenge is to use two different coloring tools on a single card design.
I used the Water Painters and blender pens to color in the Gallery Blooms flower image!

Measurements:
BASE: Granny Apple Green CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, scraps for dies
Basic White CS: 4″ x 5 1/4″, scraps for floral die

Emboss the Basic White CS layer with the Damask Designs embossing folder and using the Water Painter and the Poppy Parade ink refill make a very wet ink slurry and splatter the embossed layer for added texture and color.
Stamp the flower image from the Gallery Blooms stamp set on a scrap of Basic White with Tuxedo Black memento ink which is on the LAST CHANCE LIST as well as the ink refills for these stamp pads.

Die cut out the flower image. Using the glass matte use a drop of the Poppy Parade ink from the ink refill bottle and mix with water from the Water Painter and paint the bloom petals.

Mix a drop of Granny Apple Green ink refill with water and paint the leaves on the die.

Adhere the embossed layer to the card base and place the floral die on the center of the card to see where to place it.
Die cut two small leaf images from Granny Apple Green scraps. Adhere the two Granny Apple Green leaf dies behind where the flower will be eventually adhered.
Die cut a small circle from the Spotlight on Nature dies from Granny Apple Green scraps and stamp the Happy Birthday from The Right Words (which is on the LAST CHANCE LIST also)
to the middle of the die in Tuxedo Black memento ink.

Pop up the floral image from the Gallery Blooms bundle and slide the sentiment circle under the floral die and adhere down to the card.

I added three embellishments to the card.
I wanted to add a little more texture and shading to the petals and grabbed a blender pen and added some darker Poppy Parade lines with the blender pen to create shadows on the petals.
Coloring the petals with two different tools adds a lot of depth and dimension to the petals – these are gorgeous flowers to begin with but add some detailed coloring to them and they are STUNNING!!

Try a coloring technique to two to your next coloring project and see what a difference multiple tools can make!

Now it’s your turn to create some artwork of your very own – one stamp and a couple of coloring tools at a time!!!

Happy Stampin’
Natalie

more color mondays – petal pink, balmy blue and soft sea foam

more color mondays – petal pink, balmy blue and soft sea foam

Today’s More Color Mondays color challenge features Petal Pink, Balmy Blue and Soft Sea Foam.

Today’s card features a very fun and sparkly technique – dyed Wink of Stella.

Measurements:
BASE: Balmy Blue CS: 4 1/4″ x 11″
scored at 5 1/2″
Soft Sea Foam CS: 4″ x 5 1/4″
Petal Pink CS: scraps for dies
Basic White CS: scraps for dies

Always keep your Wink of Stella pens even when they dry out. If you unscrew the brush top and pry the black stopper out of the pen shaft you can fill the shaft with alcohol to re-wet the glitter left in the barrel. Put the black stopper back in and screw the pen top back in. Squeeze the tube to release the glitter inside onto a silicon mat. Squeeze one drop of ink refill onto the silicon mat. Mix the drop of ink refill with the glitter.

Cut the largest Spotlight of Nature dies in the Soft Sea Foam CS layer. Paint the edges of the die with the Soft Sea Foam tinted Wink of Stella glitter.

After painting the edges of the die place it back inside the layer.
Mix another squeeze of glitter with Petal Pink ink refill.

Splatter the Soft Sea Foam layer with the Petal Pink tinted glitter.

Adhere the Soft Sea Foam layer to the balmy Blue card base.
Stamp two flowers on Petal Pink CS in Petal Pink ink and paint the petals with the tinted Petal Pink glitter.

Die cut a smaller Spotlight on Nature die in Basic White CS. Stamp the “Sending HAPPY thoughts” from the upcoming Sending Salutations stamp set from the new catalog debuting on May 5th. Paint the word HAPPY in the Petal Pink tinted Wink of Stella.

Adhere the pink flowers to the Soft Sea Foam layer.

Mix more glitter from the Wink of Stella paint brush and a drop of Balmy Blue ink refill.

Paint the petals of the flower from the Gallery Bloom stamp bundle.

Paint the leaves with the Soft Sea Foam tinted Glitter.
Adhere the Pink flowers under the Balmy Blue flowers – pop up the blue flowers onto Stampin’ Dimensionals.

Adhere the sentiment under the blue flowers.

Adhere the Pearls of Beauty around the card.

Adding tint to the Wink of Stella adds beautiful sparkly glitter! Try this technique and create some sparkling artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

using the new stampin’ positioner tool

using the new stampin’ positioner tool

Stampin’ Up!’s new Stampin’ Positioner is the latest in a long line of practical and innovative Stampin’ tools! We are super excited to have a stamp positioning tool back in the Stampin’ Up! inventory and this one is exceptional.

With its spring loaded design, the stamp sits above the paper until you press on the plate and bring the stamp in touch with the cardstock, which makes this design ideal for this card technique!

When you are making a card with a repeating design – it is imperative to place the stamp in an exact position and be able to re-stamp if the image is not perfect. Placement is key for this type of project and this spring loaded board delivers!

Measurements:
BASE: Granny Apple Green CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″, scraps for masking

Place the Basic White CS layer on the bed of the Stampin’ Positioner and place the two magnets down on the paper to hold the paper in place.
Attach the floral stamp onto the Stamp Positioner plate – make sure that it is hovering over the cardstock layer exactly where you would like to have the stamped image.
Ink up the stamp and press down on the sring loaded plate to stamp the image.
Remove the plate and if the image did not stamp properly you can ink again and stamp in the same spot.

If the stamp if complete rotate the paper and place the plate with the stamp over the paper – adjust the paper if the stamp will not stamp in the place that you would like it to be.

Take the masks that you pre-stamped and pre-cut and place one over the stamped image to protect it from the stamp and ink.

Once the second stamp is placed and stamped rotate the paper and mask the image closest to where the new stamp will be.

Place the plate back on the positioner and make sure that when it is stamped it will be in the right place.

Ink up the stamp and press down to stamp, remove the mask and rotate the paper for the last stamp to complete the wreath shape.

For this last stamp placement you will m=need two masks one for the left and right stamped images – cover with the masks, make sure that the stamp is hovering over the place you would like to stamp it. Ink up the stamp and press down on the spring loaded platform plate.
Remove the layer from the Stampin’ Positioner and using blending brushes color the flowers in Poppy Parade ink.
Color the leaves and the outer edges of the layer in Granny Apple Green ink with a blending brush.
Adhere the Basic White CS layer to the Granny Apple Green CS base.
Adhere three embellishments – I used some retired embellishments from the holiday mini but there are many current ones that would look excellent with this card like the Sparkle Dot Essentials!

This Stampin’ Positioner is a great tool to add to your Stampin’ Supplies. Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

beautiful gallery dsp frame card

beautiful gallery dsp frame card

There is a really cool frame die in the Gallery Blooms bundle that I decided to play with and come up with a frame card to showcase the gorgeous Designer Series Paper that come sin the Beautiful Gallery Suite of products!

Measurements:
BASE: Mossy Meadow CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
(2) 4″ x 5 1/4″ layers and (1) 3/4″ x 3 1/2″
Basic Beige CS: 1″ x 4 and scrap for the long
thin banner die from Stylish Shapes die set
DSP: 3 1/4″ x 5″

Take the 2 Mossy Meadow 4″ x 5 1/4″ layers and emboss them with the Damask Designs.
Die cut the frame die from the Gallery Blooms die set with one of the layer pieces.

Cut the DSP to 3 1/4″ x 5″.

Stamp the “I miss you already” sentiment from The Right Words sentiment set in Mossy Meadow ink on a Basic Beige scrap and die cut with the thin long banner die from the Stylish Shapes die set.
Adhere to the Mossy Meadow 3/4″ x 3 1/2″ piece.
Emboss the 1″ x 4 1/4″ Basic Beige piece in the Mini Corrugated 3D embossing folder and adhere the sentiment piece on top of the embossed layer.
Place Stampin’ Dimensionals around the frame layer.
Adhere the 4″ x 5 1/4″ embossed layer onto the card front leaving even borders the entire way around.
Adhere the DSP layer on the embossed Mossy Meadow layer under the frame and secure the frame with Dimensionals over top the DSP.
Adhere the sentiment piece over the bottom third across the frame.
Adhere three Low Profile Mossy Meadow Sparkle Dots around the sentiment piece to finish off this stunning card that “frames” this gorgeous DSP to perfection!

Now it’s your turn to create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

layout #105 gallery blooms card

layout #105 gallery blooms card

Sometimes making a card can be a super simple experience especially when you follow a card sketch.

Follow along as I put together a beautiful and simply stamped card using Card Sketch #105!

Measurements:
BASE: Early Espresso CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Crumb Cake CS: 2″ x 5 1/2″
Very Vanilla CS: 4″ x 5 1/4″ and scrap for die cut
DSP: 3″ x 5 1/2″

Score the base Early Espresso card stock in half at 4 1/4″ and fold.

Emboss the 2″ Crumb Cake layer in the Damask Designs embossing folder.

Adhere to the right side of the card front leaving a 1/8″ border on the right-hand side.

Adhere the DSP to the left-hand side of the card front leaving a 1/8″ border on the left-hand side of the card front.
Stamp the three flower image from the Gallery Blooms stamp set in Early Espresso ink on the bottom right hand side of the 4″ x 5 1/4″ Very Vanilla layer and adhere to the inside of the card.
Cut a scrap piece of Very Vanilla CS with one of the larger dies from the Spotlight on Nature circle die set.
Stamp the three flower image from the Gallery Blooms stamp set on the right-hand side of the circle die.
Stamp a sentiment on the upper left-hand side of the circle die.
Pop up the circle die onto Stampin’ Dimensionals and adhere to the lower right-hand side of the card front.
Adhere three Drusy embellishments in gold tone on the card from to finish this simply stamped card sketch design!

Try this simply stamped card sketch with your supplies and show me what you can come up with – one stamp at a time!

Happy Stampin’
Natalie