more color mondays – lost lagoon, flirty flamingo and darling duckling

more color mondays – lost lagoon, flirty flamingo and darling duckling

Well this third Product of the Month release is a hit! This Designer Series Paper is beautiful and the inspiration fort todays’ More Color Mondays color challenge card! Painted Illusions is the February release in the Product of the Month category and this DSP is fabulous if I could buy it more than once I would. the first few photos are the different sides of the paper included in the packet.

Measurement:
BASE: Lost Lagoon CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″, scraps for dies
DSP: 4″ square and 2″scrap strip for dies
Vellum CS: 4″ square

Emboss the 4″ x 5 1/4″ Basic White layer with the Soft Waves 3D embossing folder and adhere to the Lost Lagoon card base.
Take the empty circle die from the Springtime Scenes awesome die set collection die cut the Painted Illusions Product of the Month DSP and save both the inner circle and the outer ring – we will be using both!

Die cut the vellum layer with the leaf circle.

Glue the DSP outer circle to the outer portion of the vellum leaf circle die.

Glue the inner DSP circle die to the upper middle of the card front onto the embossed Basic White layer.
Add glue to the vellum layer only under where the DSP ring is. Attach over the circle ont he card front.
Take two blending brushes and Flirty Flamingo and Darling Duckling ink and color a scrap piece of Basic White CS.
Stamp the lady bug image from the Springtime Scenes stamp set and die cut them out.
Blend another Basic White scrap and die cut the sentiment image and stamp the sentiment “Sweet springtime” in Tuxedo Black memento ink on the die cut.

Pop up the three lady bugs around the vellum circle.

Adhere the sentiment on the lower right hand side of the card front.
I added the new embellishments Pearlized Faceted circles – I love these new sparkles!

I wanted to add a little more Lost Lagoon so I die cut some leaf dies!

I added the leaf die images to the card for more color balance!

Don’t be afraid to add to a card that you had planned out if it seems out of balance – you will grow better at design elements of a card and if you are thinking something is missing or off sometimes it is. Try adding something with out gluing it down you can always remove it then if you decide it was better in the original format.
Experiment that is how you get better at designing!

Now it’s your turn to go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

PS: remember that the Springtime Scenes is an Online Exclusive March Release so it will not appear in the photo links below because it is only available as a pre-order for demonstrators or new recruits in the starter kit!

more color mondays – pumpkin pie, petal pink and balmy blue

more color mondays – pumpkin pie, petal pink and balmy blue

Today’s More Color Mondays color challenge takes it’s cue from the gorgeous Everyday Skies 6″ x 6″ DSP. The sheet on the front of this card is covered in fluffy clouds of Petal pink and light Pumpkin Pie set against a Balmy Blue sky. A perfect summer sky for a summery fun fold card! This card is called a Pop Out Swing Fun Fold and i will show you how easy it is to make!
Follow along and make one of your own!

Measurements:
BASE 1: Balmy Blue CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
BASE 2: Balmy Blue CS: 5 1/2″ x 8″
scored at 2″, 4″ and 6″
DSP: BASE 1 outside layer: 4″ x 5 1/4″
BASE 2 inside layers: (3) 1 3/4″ x 5 1/4″
Basic White CS: 1 3/4″ x 5 1/4″
Pumpkin Pie CS: scraps for butterfly dies
Petal Pink CS: scraps for butterfly dies

Score BASE 1 at 4 1/4″ and BASE 2 at 2″, 4″, and 6″.

Adhere the 4″ x 5 1/4″ Everyday Skies DSP layer to the Balmy Blue BASE 1 card front.

Flip BASE 1 over and adhere one of the Beautiful Bokeh DSP strips to the left-hand edge of the backside.
Die cut the large base butterfly image from the Beautiful Butterflies bundle out of the card front – cutting through both layers on the front and the DSP on the back side.
On BASE 2, place the 5 1/2″ side of the paper at the top edge of the Stampin’ Trimmer, cut at 3/4″ down to the 2″ score line on each side of the paper. Then cut along the 2″ score line in between the cut lines. This will leave two tabs on the top and bottom of this BASE piece.
Adhere the other two 1 3/4″ x 5 1/4″ Beautiful Bokeh DSP pieces to the second and thrid panels of BASE 2.
Stamp and decorate the Basic White 1 3/4″ layer and adhere to the last panel of BASE 2.
Place Multipurpose liquid glue to the back side of panel 4 and adhere to the right-hand edge of BASE 1 making sure that the outside edges align.
Fold in between panels 2 and 3 and apply liquid glue to the tabs.

Clos ethe card front over the tabs and adhere to the back of the BASE 1 card front. If you lie the BASE 2 flat and bring the BASE 1 card front over it this will ensure that the card will close well after adhering.

With the card closed, apply liquid glue to the inside right panel, the part that is visible through the butterfly die cut out space.
Die cut the butterfly base in Pumpkin Pie CS.
Die cut the butterfly detail die in Petal Pink CS.
Adhere the detailed die to the base with Liquid Glue.
Adhere the completed butterfly die to the right-hand edge that has glue on it – laying the butterfly into the original die negative space.
Once dry this will allow the butterfly to “swing” as the mechanism opens and closes with the card!
I added two smaller butterflies to the inside of the card and Holographic Resin Dots to the outside of the card to finish it off with a llittle sparkle!

You can cut out the front of the card wish any shape! Try a die that you have on hand and see what artwork you can create – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – melon mambo, peach pie and flirty flamingo

more color mondays – melon mambo, peach pie and flirty flamingo

This will be the final More Color Mondays Color Challenge for the 2025 Sale-a-bration catalog so I created a double fun fold card with the Heart Shaped Level Two Reward bundle in hues of Melon Mambo, Peach Pie and Flirty Flamingo taking the lead from one of the gorgeous pieces of Bloom Impressions Sale-a-bration DSP!

This double fun fold card features a hidden gate-fold card inside the card front as a sweet little surprise!

Measurements:
BASE: Melon Mambo CS: 4 1/4″ x 5 1/2″
3″ x 4″ for front matte
scraps for die cuts
Flirty Flamingo layer: 3 3/4″ x 4 3/4″
scraps for die cuts
Peach Pie CS Outside card: 3 1/4″ x 8 1/2″
scored at 4 1/4″
scrap for die cuts
Inside DSP gate fold card: 4″ x 6″
scored at 1 1/2″ and 4 1/2″
scrap for die cut
Basic White CS inside layer: 2 3/4″ x 3 3/4″
scrap for die cut

Cut the Bloom Impressions DSP into a 4″ x 6″ piece.
Score at 1 1/2″ and 4 1/2″ and fold inward to create a gate fold mini card.
Cut a Basic White layer to 2 3/4″ x 3 3/4″ and adhere three small flowers from the Heart Shaped die set in each of the More Color Monday color challenge colors of Melon Mambo, Peach Pie and Flirty Flamingo and adhere to the top of the white layer.
Stamp the “MY HEART LOVES YOUR HEART” sentiment in the middle of the layer and adhere to the inside middle panel of the DSP.
Cut the Peach Pie to 3 1/4″ x 8 1/2″ and score in half on the long side at 4 1/4″.
Adhere the DSP middle panel to the inside bottom of the Peach Pie card.
Emboss the Flirty Flamingo layer in the Soft Waves 3D embossing folder and adhere to the 1/4 sheet of Melon Mambo CS as the card base.
Adhere the Melon Mambo 3″ x 4″ front matte to the outside of the Peach Pie card front.
Adhere the Peach Pie card to the center of the Flirty Flamingo layer.
I stamped the “MY thoughts OF YOU ARE ALL heart SHAPED” sentiment in Melon mambo ink in the center of a Basic White CS negative heart die from the Heart Shaped bundle.
I die cut and saved the negative space from the Heart Shaped heart die in Peach Pie, Melon Mambo and the DSP.
I decided to add these under the white negative die cut sentiment heart to make it stand out more.
This is the completed hidden gate fold card inside and out.
I die cut the Heart Shaped die in the Bloom Impressions DSP and adhered it to the Melon Mambo matte layer.
I die cut two small flowers from each cardstock color and adhered them to the lower left-hand side of the heart die.
I adhered Iridescent Pears to the center of each small flower die, and stamped the “JUST BECAUSE I CARE” sentiment to the lower right-hand side of the layer to finish the card!
I loved this color combination and how this “surprise inside” card turned out. Thanks to the original inspiration from one of our new Artisan Design Team Members Pamela B who learned this from her upline Rhonda W. I love learning from other creative demonstrators and teaching you how to do these fun cards!

Would love to see your creations using this design! Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

simply stamped heart shaped bundle card

simply stamped heart shaped bundle card

Today’s blog post is all about FREE stuff! This heart shaped bundle card is made with two different FREE products. The level one Sale-a-bration DSP called Bloom Impressions Designer Series Paper creates the die cut heart as the center focal point from the Heart Shaped bundle.

Measurements:
BASE: Blueberry Bushel CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Basic White CS: 4″ x 5 1/4″
DSP: scrap for the heart die cut

This card uses the layout #14 from page 22 from the Annual Catalog.

Using a blending brush, brush a circular ink area with Blueberry Bushel ink in the upper center of the Basic White CS layer.
Grab a Water Painter and the Craft White ink pad and add water to the lid of the ink pad. Tap the brush on the edge of a bone folder over the Basic White CS layer and create a splatter pattern over the Blueberry Bushel ink spot.
Adhere the Basic White layer onto the Blueberry Bushel card base.
Die cut the heart outline die from the Heart Shaped bundle from the Bloom Impressions DSP.
Adhere the heart with glue over the Blueberry Bushel area.
Stamp the sentiment below the heart die.
Adhere three Rainbow Adhesive-Backed Dots around the sentiment in the Blueberry Bushel tones.

I love the little details of this simply stamped card – the white ink splattered color blended background, the DSP die cut heart as the focal point.

Try die cutting DSP and creating a simple card – now go and create some art work of your very own – one stamp at a time!

Happy Stampin’
Natalie

more color mondays – melon mambo, berry burst and lemon lime twist shadow box fun fold

more color mondays – melon mambo, berry burst and lemon lime twist shadow box fun fold

Are you a Friends TV Series fan? When I saw the Friends of the Ocean Suite and the lobster the first thing I thought of was my son asking for the complete DVD boxed set of the series for Christmas – we loved that series and if you are a fan, you will get this card and understand immediately why I saw this Designer Series Paper and knew I had to make this card!

Measurements:
BASE: Melon Mambo 4 1/4″ x 11″
scraps for the alphabet dies
DSP: (2) 3/8″ x 4 1/4 and (1) 3 1/2″ x 4 1/4″
Scraps for the alphabet dies
die cut of the large lobster
Basic White CS: 3 1/4″ x 4″

Score the base on the 11″ side at 1/2″, 1″ 4 1/2″, 5″, 5 1/2″, 6″, 6 1/2″, 10″ and 10 1/2″.

Fold the card in half and adhere the 3 1/4″ x 4 1/4″ DSP piece to the center front panel

Die cut the largest square out of the center of the card front.
Adhere the 3/8″ x 4 1/4″ DSP pieces on the outer panels of the card front.
Adhere the Basic White CS layer on the center large panel on the inside of the card.

Adhere the score lines on either side of the center score line.

Die cut the larger lobster out of the DSP and adhere it to the lower corner of the Basic White window area.

Cut the word Lobster out of the Friends of the Ocean DSP and adhere to the lower portion of the lobster die cut (I closed the card front and using a pencil marked the corners keeping the images inside the corners so you can see the images through the shadow box opening.

Cut the Mini Alphabet dies in Melon Mambo CS and adhere the MY above the lobster on the left-hand side.
Adhere the right-hand panels together.
Adhere the word YOU’RE off of the top of the shadow box opening.
I added a Lemon Lime Lime circle die under the word MY to add color to the card.
This card has a bunch of scoring but is relatively easy and looks impressive!

This shadow box card is a 3D Stunner – try it with your stash and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie