card sketch #107 – extraordinary flora

card sketch #107 – extraordinary flora

Sketch challenges can stretch you creatively!

This sketch (Sketch #107) has so many possibilities!

I chose to make the layers all white but you could chose to use colored cardstock or Designer Series Paper.

Measurements:
BASE: Basic White CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″, 4″ x 5 1/4″, (2) 1″ x 5 1/4″,
scrap for the sentiment die and the washi tape

Run the Basic White layer through the Garden and Glass embossing folder. Place the folder down the center of the layer and emboss.

Cut two strips of Basic White CS 1″ x 5 1/4″.

Place Stampin’ Dimensionals down each 1″ strip.

Adhere each 1″ strip down each side of the 4″ x 5 1/4″ embossed layer.

Place the Extraordinary Flora Washi Tape onto a Basic White layer and then die cut the flower images out.
Adhere the flower images on the top left hand edge and the bottom right-hand edge. Placing some under the edge and some above.
Stamp the sentiment in Flirty Flamingo ink and then use a blending brush to lightly color the Textured Notes die.

Adhere the sentiment piece with Stampin’ Dimensionals on the left hand side and tape on the right hand edge to the strip. Tuck a flower under the sentiment die piece.

Place three sequins on the card front to finish it off.

Try this card sketch and see what you can come up with! Go and create some artwork of your very own using #107 – one stamp at a time!

Happy Stampin’
Natalie

layout #105 gallery blooms card

layout #105 gallery blooms card

Sometimes making a card can be a super simple experience especially when you follow a card sketch.

Follow along as I put together a beautiful and simply stamped card using Card Sketch #105!

Measurements:
BASE: Early Espresso CS: 5 1/2″ x 8 1/2″
scored at 4 1/4″
Crumb Cake CS: 2″ x 5 1/2″
Very Vanilla CS: 4″ x 5 1/4″ and scrap for die cut
DSP: 3″ x 5 1/2″

Score the base Early Espresso card stock in half at 4 1/4″ and fold.

Emboss the 2″ Crumb Cake layer in the Damask Designs embossing folder.

Adhere to the right side of the card front leaving a 1/8″ border on the right-hand side.

Adhere the DSP to the left-hand side of the card front leaving a 1/8″ border on the left-hand side of the card front.
Stamp the three flower image from the Gallery Blooms stamp set in Early Espresso ink on the bottom right hand side of the 4″ x 5 1/4″ Very Vanilla layer and adhere to the inside of the card.
Cut a scrap piece of Very Vanilla CS with one of the larger dies from the Spotlight on Nature circle die set.
Stamp the three flower image from the Gallery Blooms stamp set on the right-hand side of the circle die.
Stamp a sentiment on the upper left-hand side of the circle die.
Pop up the circle die onto Stampin’ Dimensionals and adhere to the lower right-hand side of the card front.
Adhere three Drusy embellishments in gold tone on the card from to finish this simply stamped card sketch design!

Try this simply stamped card sketch with your supplies and show me what you can come up with – one stamp at a time!

Happy Stampin’
Natalie

layout #104 beautiful gallery card

layout #104 beautiful gallery card

Do you ever feel stuck and don’t have any new ideas for making cards? I love to challenge myself with card sketches – they are a perfect starting point and inspiration for those of us that get stuck creatively – every once in a while!
Don’t let anyone kid you – we ALL get stuck creatively!

Card sketches are a perfect way to get unstuck!
This sketch #104 is a great way to use 6″ x 6″ DSP – I cut a 3″ square which means I can make 4 CARDS from one sheet of 6″ x 6″ DSP!
SO FUN!

Measurements:
BASE: Secret Sea CS: 4 1/4″ x 11″
scored at 5 1/2″
Basic White CS: 3 1/4″ x 5 1/4″
DSP: 3″ square

Cut the 3″ square into 1″ x 3″ strips of DSP.
Keep the pattern in order and pay attention to the direction of the DSP if applicable.
Adhere the top piece of DSP to the top ofthe Basic White CS layer leaving a 1/8″ border on the top and sides.
Place the bottom piece as a place holder 1/8″ down from the bottom of the first ppiece and adhere the second piece 1/8″ below the place holder piece.
Now take the third piece that you used as a place holder and adhere it to the Basic White CS layer 1/8″ below the second piece.

(This will leave an evenly spaced blank spot below the first piece to stamp your sentiment!)

Tear the bottom off of the Basic White layer.

TIP: Tear towards you and place your thumbs at the tear and move them as you tear so that the tear does not get away from you!

Emboss the front of the card base with the Damask Designs embossing folder – this is a basic embossing folder not a 3D – so place the base plate #1 and the #3 cutting plate on the Stampin’ Cut and Emboss machine. Place the paper inside the embossing folder, set on the bottom #3 cutting plate and add the top #3 cutting plate above and embossing folder and run through the machine!
Stamp in Secret Sea ink in the blank space on the Basic White layer and adhere the 2025-2027 In Color Flat Pearls in Secret Sea around the sentiment.
Pop up the Basic White layer on Stampin’ Dimensionals and adhere to the middle of the card front.
Simpoly using another design on the same pack of Beautiful Gallery DSP and changing the position of the sentiment stamp creates another card made from the same card sketch but looks entirely different!

Try this card sketch with your stash and send my a pic of your creation! Now go and create with this card sketch and make some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

creating a simple sale-a-bration card

creating a simple sale-a-bration card

Have you ever REALLY looked at the bottom of page 22 in the 2024-2025 Annual Catalog? There are 22 card layout samples and there is so much inspiration in these little blocks!

Today’s blog post is a very simple stamps, ink, paper card made with a sneak peak DSP from the Sale-a-bration catalog available January 7th!
For those customers that received their catalogs in the mail on page 11 of the 2025 Sale-a-bration catalog you will see the 12 sheets of 12″ x 12″ beautiful floral paper that you can earn for FREE with a $60 purchase.
I used the last layout design on page 22 and designed a simple stamping card with this DSP taking center stage! The awesome part of this card is that it uses a 4″ square so you could make 9 cards from one sheet of DSP. One pack of this FREE DSP could make 108 of these cards!

Measurements:
BASE: Basic White CS: 4 1/4″ x 11″
scored at 5 1/2″
DSP: 4″ square cut diagonally

You will notice that if you look at the card layout on page 22 there are two squares and a sentiment strip in between. Now here is the fun part! You can take this layout as a springboard and tweek it – it is ONLY a starting point! I decided to use the Designer Series paper as the “two squares” and eliminate the extra rectangular layer.
You can cut the DSP square anyway you choose I started about an inch down from the top of the DSP and cut diagonally to just about 2/3 of the way down on the opposite side.
I laid the DSP pieces on the card front and positioning them so that the borders on the sides and top are even I lightly drew a pencil mark along the diagonal edges.
I then pushed the DSP away and in between the top and bottom pencil marks I stamped the sentiment and the flowers from a level two Sale-a-bration set called Heart Shaped Bundle (comes with stamps and coodinating dies! FREE with a $120 purchase) in Berry Burst ink.
I stamped the leaves in Shaded Spruce ink around the floral images.
Adhere the top and bottom Designer Series paper pieces to the card front allowing the sentiment and floral stamped patterns to “peek” through the diagonal space in between them.
Wrap the white ribbon around the bottom front of the card edge and tie in a knot.

Such a fun and simple stamped card!

Look on page 22, pick out a layout and use it as a starting point for your card. Now go and create some artwork of your very own – one stamp at a time!

Happy Stampin’
Natalie

Reminder since these products will not be available until after January 7th this post will go live with only the photo directory below showing current products only.

more color mondays – berry burst, coastal cabana and balmy blue

more color mondays – berry burst, coastal cabana and balmy blue

Have you noticed card sketches in the new Stampin’ Up! 2024-2025 Annual Catalog? I love the new catalog design and all the helpful hints and techniques – to me it seems that it is designed like a crafting magazine and I think this is our best design yet!

I picked out a card sketch for today’s More Color Mondays Color Challenge and the Full of Life Suite with the colors Berry Burst, Coastal Cabana and Balmy Blue.

Measurements:
BASE: Coastal Cabana CS 5 1/2″ x 8 1/2″
scored at 4 1/4″
DSP: 3 1/2″ x 4 1/4″
Berry Burst: scraps for die cuts
Coastal Cabana: scraps for die cuts
Balmy Blue: scraps for die cuts

Sketches make putting a card together super easy! SO I picked out a sketch from page 22 in the new catalog – this page describes Basic Card Design! I picked the second to the last one in the bottom row. I cut my paper and a bunch of different die cuts and started to play with the sketch layout. You may notice that I started out with rectangular dies instead of the circles – just because the sketch has circle shapes in the design does NOT mean you have to use circles! This is the true nature of card sketches – they are the starting point, the springboard to get your own creative juices flowing!
In the end I did like the circle dies better for my card but I tried a bunch of combinations before I settled on what is to follow and sometimes that is the creative process!

I used the leaf stamp from the Full of Life stamp set and randomly stamped the leaves in Coastal Cabana ink on Coastal Cabana cardstock for a tone on tone look. (A tip I tell my customers in my classes – most times when I am stamping on an entire blank piece of cardstock I will stamp and look for a triangular pattern. This goes back to a design principle called the rule of thirds/threes this triangular shap is very pleasing to the eye and if you use it – it helps break that daunting empty page into a smaller section and you are only concentrating on where the next stamp is and not about the whole project!
I adhered the DSP to the card base at an angle and cut out the word friend in Balmy Blue and Coastal Cabana. I die cut the leaf die in Berry Burst and two circles from the Stylish Shapes die set in Balmy Blue and Berry Burst. I die cut the long sentiment piece in Coastal Cabana and stamped the sentiment on that piece.
I arranged and adhered the circle dies next over the Designer Series Paper layer.
I adhered the leaf die with glue to the upper circle die. I used the leaf as the embellishment – the sketch shows a ribbon and I substituted this die as the embellishment.
I popped up the sentiment piece and placed it in the middle of the two circles as in the sketch.
I layered the word dies together with glue and added them to the card over the Berry Burst lower circle.
I added 5 Iridescent Adhesive-Backed Discs 4 in the Berry Burst color and one in the blueish tint on the i in the friend word die!
The card is a simple and easy card sketch card!
Try one of our Annual Catalog card sketches today or one of the many you can find all over the internet! Now go and create a sketch project of your very own – one stamp at a time!

Happy Stampin’
Natalie